On Thu, 25 Jan 2018 17:14:52 +0000 Ruslan Bukin <ruslan.bu...@cl.cam.ac.uk> wrote:
> On Thu, Jan 25, 2018 at 06:12:04PM +0100, Emmanuel Vadot wrote: > > > Log: > > > Add basic driver for Qualcomm USB 2.0 EHCI controller. > > > This driver relies on system initialization in u-boot. > > > > > > Tested on DragonBoard 410c. > > > > > > Sponsored by: DARPA, AFRL > > > > > > Added: > > > head/sys/dev/usb/controller/ehci_msm.c (contents, props changed) > > > > > > > The code looks like the generic-ehci, would it be better to subclass > > generic-ehci to fdt and add qualcomm quirks if necessary ? > > > > Hi Emmanuel > > This driver is incomplete currently and requires initialization in u-boot. > > Both system clocks and EHCI subsystem, also Qualcomm power management device > requires full initialization. > My goal will be to extend this driver and proceed full initialization > required for Qualcomm EHCI. Yes I can see that all the clock/reset/phy management is not yet done. But the generic-ehci driver should be subclassed so you can re-use the ehdi generic code in your driver. Then you will just need the attach function to deal the clock/reset/phy. > The u-boot option CONFIG_DM_DEVICE_REMOVE=n must be added in order to keep > devices initialized before jumping to FreeBSD. We will need to get rid of > these by adding some code to this driver I guess. > > Thanks. > > Ruslan -- Emmanuel Vadot <m...@bidouilliste.com> <m...@freebsd.org> _______________________________________________ svn-src-head@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/svn-src-head To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
