Hm, its an AR9300, right? It should be getting ART from 0x1fff0000 like the rest of the boards and the AR9300 HAL will add 0x1000 for you. Don't ask me why.
What's the MAC address of the wlan0 interface you created? Does it actually all work? :) -a On 10 October 2015 at 20:31, Sean Bruno <sbr...@freebsd.org> wrote: > Author: sbruno > Date: Sun Oct 11 03:31:11 2015 > New Revision: 289130 > URL: https://svnweb.freebsd.org/changeset/base/289130 > > Log: > Use machine specific values cleaned from openwrt for the mac address > location on the TP link mr3020 > > Modified: > head/sys/mips/conf/TP-MR3020.hints > > Modified: head/sys/mips/conf/TP-MR3020.hints > ============================================================================== > --- head/sys/mips/conf/TP-MR3020.hints Sun Oct 11 02:00:08 2015 > (r289129) > +++ head/sys/mips/conf/TP-MR3020.hints Sun Oct 11 03:31:11 2015 > (r289130) > @@ -34,8 +34,10 @@ hint.arge.1.fduplex=1 > > # Where the ART is - last 64k in the flash > # 0x9fff1000 ? > -hint.ath.0.eepromaddr=0x1fff0000 > +hint.ath.0.eepromaddr=0x1fff1000 > hint.ath.0.eepromsize=16384 > + > +hint.ar71xx.0.eeprom_mac_addr=0x1f01fc00 > > # The board 16MiB flash layout in uboot env: > # > _______________________________________________ svn-src-head@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/svn-src-head To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
