Author: glebius
Date: Tue Apr 21 08:54:14 2015
New Revision: 281819
URL: https://svnweb.freebsd.org/changeset/base/281819

Log:
  The comment on BMCR data in if_media entry is wrong. The ifm_data stores
  the index array, not a value for BMCR register. In case of IFM_10_T there
  could be either MII_MEDIA_10_T or MII_MEDIA_10_T_FDX, which are 1 and 2,
  accordingly. Neither matches a valid BMCR value. My guessing is that this
  write is harmless, since later mii_phy_setmedia() would write a proper
  value there.
  
  The code is here since the initial checkin. Note that case IFM_100_TX has
  the same comment, but a proper value of BMCR_ISO is written. So, collapse
  two cases into one, always writing there BMCR_ISO.
  
  Sponsored by: Nginx, Inc.

Modified:
  head/sys/dev/mii/mlphy.c

Modified: head/sys/dev/mii/mlphy.c
==============================================================================
--- head/sys/dev/mii/mlphy.c    Tue Apr 21 08:47:27 2015        (r281818)
+++ head/sys/dev/mii/mlphy.c    Tue Apr 21 08:54:14 2015        (r281819)
@@ -220,29 +220,11 @@ mlphy_service(xsc, mii, cmd)
                        msc->ml_linked = 0;
                        return (0);
                case IFM_10_T:
-                       /*
-                        * For 10baseT modes, reset and program the
-                        * companion PHY (of any), then program ourselves
-                        * to match. This will put us in pass-through
-                        * mode and let the companion PHY do all the
-                        * work.
-                        *
-                        * BMCR data is stored in the ifmedia entry.
-                        */
-                       if (other != NULL) {
-                               PHY_RESET(other);
-                               PHY_WRITE(other, MII_BMCR, ife->ifm_data);
-                       }
-                       mii_phy_setmedia(sc);
-                       msc->ml_state = 0;
-                       break;
                case IFM_100_TX:
                        /*
-                        * For 100baseTX modes, reset and isolate the
-                        * companion PHY (if any), then program ourselves
+                        * For 10baseT and 100baseTX modes, reset and isolate
+                        * the companion PHY (if any), then program ourselves
                         * accordingly.
-                        *
-                        * BMCR data is stored in the ifmedia entry.
                         */
                        if (other != NULL) {
                                PHY_RESET(other);
_______________________________________________
svn-src-head@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"

Reply via email to