On Tuesday, February 05, 2013 2:46:15 am Sergey Kandaurov wrote: > Err.. No, I haven't set hw.uart.console. Sorry for being misleading. > The cited snippet from my previous mail was to demonstrate how the > resulting hw.uart.console value depends (or rather not :)) on hints. > All I have (changed) wrt console is: > > /boot/device.hints > #hint.uart.0.flags="0x10" > hint.uart.1.flags="0x10" > > /boot/loader.conf > boot_multicons="YES" > boot_serial="YES" > boot_verbose="YES" > console="comconsole,vidconsole" > > This setup worked for ages. To isolate this problem I took /boot/loader > from my older current machine (also with COM2) to replace it here, > and it started to work again.
Right, so with this setup, you are using a non-working serial console for the loader on COM1 and then wanting the kernel to use COM2? Why? If you want to do that, set hw.uart.console manually. I think that is a very rare case and that most folks want to use the same console in both the loader and kernel. -- John Baldwin _______________________________________________ svn-src-head@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-head To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
