Author: adrian
Date: Sun Apr 15 22:59:56 2012
New Revision: 234327
URL: http://svn.freebsd.org/changeset/base/234327
Log:
Add in the AP96 phy configuration from openwrt.
* arge0 doesn't (yet) work via the switch PHY ports; I'm not sure why.
* arge1 maps to the WAN port. That works.
TODO:
* The PLL register needs a different (non-default) value for Gigabit
Ethernet. The board setup code needs to be extended a bit to allow
for non-default pll_1000 values - right now, those values come out
of hard-coded values in the per-chip set_pll_ge() routines.
Obtained from: Linux / OpenWRT
Modified:
head/sys/mips/conf/AP96.hints
Modified: head/sys/mips/conf/AP96.hints
==============================================================================
--- head/sys/mips/conf/AP96.hints Sun Apr 15 22:34:22 2012
(r234326)
+++ head/sys/mips/conf/AP96.hints Sun Apr 15 22:59:56 2012
(r234327)
@@ -1,17 +1,15 @@
# $FreeBSD$
-hint.arge.0.phymask=0x000c
-hint.arge.0.media=100
+# TODO: RGMII
+hint.arge.0.phymask=0x0f
+hint.arge.0.media=1000
hint.arge.0.fduplex=1
-# XXX grab these from uboot?
-# hint.arge.0.eeprommac=0x1f01fc00
-
-# The ath NICs have calibration data in flash.
-# PCI slot 17
-# hint.ath.0.eepromaddr=0x1fff1000
-# PCI slot 18
-# hint.ath.1.eepromaddr=0x1fff5000
+# TODO: RGMII
+# TODO: pll_1000 = 0x1f000000
+hint.arge.1.phymask=0x10
+# hint.arge.1.media=1000
+# hint.arge.1.fduplex=1
# ath0 - slot 17
hint.pcib.0.bus.0.17.0.ath_fixup_addr=0x1fff1000
_______________________________________________
svn-src-head@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
