Author: manu
Date: Mon Oct 14 21:58:46 2019
New Revision: 353531
URL: https://svnweb.freebsd.org/changeset/base/353531
Log:
arm64: allwinner: Add support for the usb3 phy
The usb 3 controller in the H6 SoC have a dedicated phy.
Add support for it.
Mostly imported from NetBSD
MFC after: 1 month
Added:
head/sys/arm/allwinner/aw_usb3phy.c (contents, props changed)
Modified:
head/sys/conf/files.arm64
Added: head/sys/arm/allwinner/aw_usb3phy.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/arm/allwinner/aw_usb3phy.c Mon Oct 14 21:58:46 2019
(r353531)
@@ -0,0 +1,299 @@
+/* $NetBSD: sunxi_usb3phy.c,v 1.1 2018/05/01 23:59:42 jmcneill Exp $ */
+
+/*-
+ * Copyright (c) 2018 Jared McNeill <jmcne...@invisible.ca>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Allwinner USB3PHY
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/bus.h>
+#include <sys/rman.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/gpio.h>
+#include <machine/bus.h>
+
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+
+#include <dev/extres/clk/clk.h>
+#include <dev/extres/hwreset/hwreset.h>
+#include <dev/extres/regulator/regulator.h>
+#include <dev/extres/phy/phy_usb.h>
+
+#include "phynode_if.h"
+
+#define USB3PHY_APP 0x00
+#define APP_FORCE_VBUS (0x3 << 12)
+
+#define USB3PHY_PIPE_CLOCK_CONTROL 0x14
+#define PCC_PIPE_CLK_OPEN (1 << 6)
+
+#define USB3PHY_PHY_TUNE_LOW 0x18
+#define PTL_MAGIC 0x0047fc87
+
+#define USB3PHY_PHY_TUNE_HIGH 0x1c
+#define PTH_TX_DEEMPH_3P5DB (0x1F << 19)
+#define PTH_TX_DEEMPH_6DB (0x3F << 13)
+#define PTH_TX_SWING_FULL (0x7F << 6)
+#define PTH_LOS_BIAS (0x7 << 3)
+#define PTH_TX_BOOST_LVL (0x7 << 0)
+
+#define USB3PHY_PHY_EXTERNAL_CONTROL 0x20
+#define PEC_REF_SSP_EN (1 << 26)
+#define PEC_SSC_EN (1 << 24)
+#define PEC_EXTERN_VBUS (0x3 << 1)
+
+#define __LOWEST_SET_BIT(__mask) ((((__mask) - 1) & (__mask)) ^ (__mask))
+#define __SHIFTIN(__x, __mask) ((__x) * __LOWEST_SET_BIT(__mask))
+
+static struct ofw_compat_data compat_data[] = {
+ { "allwinner,sun50i-h6-usb3-phy", 1 },
+ { NULL, 0 }
+};
+
+static struct resource_spec aw_usb3phy_spec[] = {
+ { SYS_RES_MEMORY, 0, RF_ACTIVE },
+ { -1, 0 }
+};
+
+struct awusb3phy_softc {
+ struct resource * res;
+ regulator_t reg;
+ int mode;
+};
+
+ /* Phy class and methods. */
+static int awusb3phy_phy_enable(struct phynode *phy, bool enable);
+static int awusb3phy_get_mode(struct phynode *phy, int *mode);
+static int awusb3phy_set_mode(struct phynode *phy, int mode);
+static phynode_usb_method_t awusb3phy_phynode_methods[] = {
+ PHYNODEMETHOD(phynode_enable, awusb3phy_phy_enable),
+ PHYNODEMETHOD(phynode_usb_get_mode, awusb3phy_get_mode),
+ PHYNODEMETHOD(phynode_usb_set_mode, awusb3phy_set_mode),
+
+ PHYNODEMETHOD_END
+};
+DEFINE_CLASS_1(awusb3phy_phynode, awusb3phy_phynode_class,
awusb3phy_phynode_methods,
+ sizeof(struct phynode_usb_sc), phynode_usb_class);
+
+#define RD4(res, o) bus_read_4(res, (o))
+#define WR4(res, o, v) bus_write_4(res, (o), (v))
+
+static int
+awusb3phy_phy_enable(struct phynode *phynode, bool enable)
+{
+ struct awusb3phy_softc *sc;
+ device_t dev;
+ uint32_t val;
+ int error = 0;
+
+ dev = phynode_get_device(phynode);
+ sc = device_get_softc(dev);
+
+ device_printf(dev, "%s: called\n", __func__);
+
+ if (enable) {
+ val = RD4(sc->res, USB3PHY_PHY_EXTERNAL_CONTROL);
+ device_printf(dev, "EXTERNAL_CONTROL: %x\n", val);
+ val |= PEC_EXTERN_VBUS;
+ val |= PEC_SSC_EN;
+ val |= PEC_REF_SSP_EN;
+ device_printf(dev, "EXTERNAL_CONTROL: %x\n", val);
+ WR4(sc->res, USB3PHY_PHY_EXTERNAL_CONTROL, val);
+
+ val = RD4(sc->res, USB3PHY_PIPE_CLOCK_CONTROL);
+ device_printf(dev, "PIPE_CONTROL: %x\n", val);
+ val |= PCC_PIPE_CLK_OPEN;
+ device_printf(dev, "PIPE_CONTROL: %x\n", val);
+ WR4(sc->res, USB3PHY_PIPE_CLOCK_CONTROL, val);
+
+ val = RD4(sc->res, USB3PHY_APP);
+ device_printf(dev, "APP: %x\n", val);
+ val |= APP_FORCE_VBUS;
+ device_printf(dev, "APP: %x\n", val);
+ WR4(sc->res, USB3PHY_APP, val);
+
+ WR4(sc->res, USB3PHY_PHY_TUNE_LOW, PTL_MAGIC);
+
+ val = RD4(sc->res, USB3PHY_PHY_TUNE_HIGH);
+ device_printf(dev, "PHY_TUNE_HIGH: %x\n", val);
+ val |= PTH_TX_BOOST_LVL;
+ val |= PTH_LOS_BIAS;
+ val &= ~PTH_TX_SWING_FULL;
+ val |= __SHIFTIN(0x55, PTH_TX_SWING_FULL);
+ val &= ~PTH_TX_DEEMPH_6DB;
+ val |= __SHIFTIN(0x20, PTH_TX_DEEMPH_6DB);
+ val &= ~PTH_TX_DEEMPH_3P5DB;
+ val |= __SHIFTIN(0x15, PTH_TX_DEEMPH_3P5DB);
+ device_printf(dev, "PHY_TUNE_HIGH: %x\n", val);
+ WR4(sc->res, USB3PHY_PHY_TUNE_HIGH, val);
+
+ if (sc->reg)
+ error = regulator_enable(sc->reg);
+ } else {
+ if (sc->reg)
+ error = regulator_disable(sc->reg);
+ }
+
+ if (error != 0) {
+ device_printf(dev,
+ "couldn't %s regulator for phy\n",
+ enable ? "enable" : "disable");
+ return (error);
+ }
+
+ return (0);
+}
+
+static int
+awusb3phy_get_mode(struct phynode *phynode, int *mode)
+{
+ struct awusb3phy_softc *sc;
+ device_t dev;
+
+ dev = phynode_get_device(phynode);
+ sc = device_get_softc(dev);
+
+ *mode = sc->mode;
+
+ return (0);
+}
+
+static int
+awusb3phy_set_mode(struct phynode *phynode, int mode)
+{
+ device_t dev;
+ intptr_t phy;
+ struct awusb3phy_softc *sc;
+
+ dev = phynode_get_device(phynode);
+ phy = phynode_get_id(phynode);
+ sc = device_get_softc(dev);
+
+ if (mode != PHY_USB_MODE_HOST)
+ return (EINVAL);
+
+ sc->mode = mode;
+
+ return (0);
+}
+
+static int
+awusb3phy_probe(device_t dev)
+{
+ if (!ofw_bus_status_okay(dev))
+ return (ENXIO);
+
+ if (ofw_bus_search_compatible(dev, compat_data)->ocd_data == 0)
+ return (ENXIO);
+
+ device_set_desc(dev, "Allwinner USB3PHY");
+ return (BUS_PROBE_DEFAULT);
+}
+
+static int
+awusb3phy_attach(device_t dev)
+{
+ struct phynode *phynode;
+ struct phynode_init_def phy_init;
+ struct awusb3phy_softc *sc;
+ clk_t clk;
+ hwreset_t rst;
+ phandle_t node;
+ int error, i;
+
+ sc = device_get_softc(dev);
+ node = ofw_bus_get_node(dev);
+
+ if (bus_alloc_resources(dev, aw_usb3phy_spec, &sc->res) != 0) {
+ device_printf(dev, "cannot allocate resources for device\n");
+ return (ENXIO);
+ }
+
+ /* Enable clocks */
+ for (i = 0; clk_get_by_ofw_index(dev, 0, i, &clk) == 0; i++) {
+ error = clk_enable(clk);
+ if (error != 0) {
+ device_printf(dev, "couldn't enable clock %s\n",
+ clk_get_name(clk));
+ return (error);
+ }
+ }
+
+ /* De-assert resets */
+ for (i = 0; hwreset_get_by_ofw_idx(dev, 0, i, &rst) == 0; i++) {
+ error = hwreset_deassert(rst);
+ if (error != 0) {
+ device_printf(dev, "couldn't de-assert reset %d\n",
+ i);
+ return (error);
+ }
+ }
+
+ /* Get regulators */
+ regulator_get_by_ofw_property(dev, node, "phy-supply", &sc->reg);
+
+ /* Create the phy */
+ phy_init.ofw_node = ofw_bus_get_node(dev);
+ phynode = phynode_create(dev, &awusb3phy_phynode_class,
+ &phy_init);
+ if (phynode == NULL) {
+ device_printf(dev, "failed to create USB PHY\n");
+ return (ENXIO);
+ }
+ if (phynode_register(phynode) == NULL) {
+ device_printf(dev, "failed to create USB PHY\n");
+ return (ENXIO);
+ }
+
+ return (error);
+}
+
+static device_method_t awusb3phy_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, awusb3phy_probe),
+ DEVMETHOD(device_attach, awusb3phy_attach),
+
+ DEVMETHOD_END
+};
+
+static driver_t awusb3phy_driver = {
+ "awusb3phy",
+ awusb3phy_methods,
+ sizeof(struct awusb3phy_softc)
+};
+
+static devclass_t awusb3phy_devclass;
+/* aw_usb3phy needs to come up after regulators/gpio/etc, but before ehci/ohci
*/
+EARLY_DRIVER_MODULE(awusb3phy, simplebus, awusb3phy_driver, awusb3phy_devclass,
+ 0, 0, BUS_PASS_SUPPORTDEV + BUS_PASS_ORDER_MIDDLE);
+MODULE_VERSION(awusb3phy, 1);
Modified: head/sys/conf/files.arm64
==============================================================================
--- head/sys/conf/files.arm64 Mon Oct 14 21:56:41 2019 (r353530)
+++ head/sys/conf/files.arm64 Mon Oct 14 21:58:46 2019 (r353531)
@@ -42,6 +42,7 @@ arm/allwinner/aw_spi.c optional aw_spi
fdt
arm/allwinner/aw_syscon.c optional aw_syscon ext_resources syscon
fdt
arm/allwinner/aw_thermal.c optional aw_thermal nvmem fdt
arm/allwinner/aw_usbphy.c optional ehci aw_usbphy fdt
+arm/allwinner/aw_usb3phy.c optional xhci aw_usbphy fdt
arm/allwinner/aw_wdog.c optional aw_wdog fdt
arm/allwinner/axp81x.c optional axp81x fdt
arm/allwinner/if_awg.c optional awg ext_resources syscon aw_sid
nvmem fdt
_______________________________________________
svn-src-head@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
