Author: loos
Date: Mon Jun 10 21:50:07 2019
New Revision: 348882
URL: https://svnweb.freebsd.org/changeset/base/348882
Log:
Add support for the GPIO SD Card VCC regulator/switch and the GPIO SD Card
detection pins to the Marvell Xenon SDHCI controller.
These features are enable by 'vqmmc-supply' and 'cd-gpios' properties in the
DTS.
This fixes the SD Card detection on espressobin.
Sponsored by: Rubicon Communications, LLC (Netgate)
Modified:
head/sys/dev/sdhci/sdhci_xenon.c
Modified: head/sys/dev/sdhci/sdhci_xenon.c
==============================================================================
--- head/sys/dev/sdhci/sdhci_xenon.c Mon Jun 10 21:34:07 2019
(r348881)
+++ head/sys/dev/sdhci/sdhci_xenon.c Mon Jun 10 21:50:07 2019
(r348882)
@@ -47,6 +47,7 @@ __FBSDID("$FreeBSD$");
#include <machine/bus.h>
#include <machine/resource.h>
+#include <dev/extres/regulator/regulator.h>
#include <dev/fdt/fdt_common.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
@@ -56,6 +57,7 @@ __FBSDID("$FreeBSD$");
#include <dev/mmc/mmcreg.h>
#include <dev/sdhci/sdhci.h>
+#include <dev/sdhci/sdhci_fdt_gpio.h>
#include <dev/sdhci/sdhci_xenon.h>
#include "mmcbr_if.h"
@@ -84,10 +86,12 @@ struct sdhci_xenon_softc {
uint32_t max_clk; /* Max possible freq */
struct resource *irq_res; /* IRQ resource */
void *intrhand; /* Interrupt handle */
+ struct sdhci_fdt_gpio *gpio; /* GPIO pins for CD detection. */
struct sdhci_slot *slot; /* SDHCI internal data */
struct resource *mem_res; /* Memory resource */
+ regulator_t reg_vqmmc; /* vqmmc-supply regulator */
uint8_t znr; /* PHY ZNR */
uint8_t zpr; /* PHY ZPR */
bool no_18v; /* No 1.8V support */
@@ -188,6 +192,14 @@ sdhci_xenon_get_ro(device_t bus, device_t dev)
return (sdhci_generic_get_ro(bus, dev) ^ sc->wp_inverted);
}
+static bool
+sdhci_xenon_get_card_present(device_t dev, struct sdhci_slot *slot)
+{
+ struct sdhci_xenon_softc *sc = device_get_softc(dev);
+
+ return (sdhci_fdt_gpio_get_present(sc->gpio));
+}
+
static int
sdhci_xenon_phy_init(device_t brdev, struct mmc_ios *ios)
{
@@ -337,6 +349,25 @@ sdhci_xenon_update_ios(device_t brdev, device_t reqdev
slot = device_get_ivars(reqdev);
ios = &slot->host.ios;
+ switch (ios->power_mode) {
+ case power_on:
+ break;
+ case power_off:
+ if (bootverbose)
+ device_printf(sc->dev, "Powering down sd/mmc\n");
+
+ if (sc->reg_vqmmc)
+ regulator_disable(sc->reg_vqmmc);
+ break;
+ case power_up:
+ if (bootverbose)
+ device_printf(sc->dev, "Powering up sd/mmc\n");
+
+ if (sc->reg_vqmmc)
+ regulator_enable(sc->reg_vqmmc);
+ break;
+ };
+
/* Update the PHY settings. */
if (ios->clock != 0)
sdhci_xenon_phy_set(brdev, ios);
@@ -352,6 +383,42 @@ sdhci_xenon_update_ios(device_t brdev, device_t reqdev
}
static int
+sdhci_xenon_switch_vccq(device_t brdev, device_t reqdev)
+{
+ struct sdhci_xenon_softc *sc;
+ struct sdhci_slot *slot;
+ int uvolt, err;
+
+ sc = device_get_softc(brdev);
+
+ if (sc->reg_vqmmc == NULL)
+ return EOPNOTSUPP;
+
+ slot = device_get_ivars(reqdev);
+ switch (slot->host.ios.vccq) {
+ case vccq_180:
+ uvolt = 1800000;
+ break;
+ case vccq_330:
+ uvolt = 3300000;
+ break;
+ default:
+ return EINVAL;
+ }
+
+ err = regulator_set_voltage(sc->reg_vqmmc, uvolt, uvolt);
+ if (err != 0) {
+ device_printf(sc->dev,
+ "Cannot set vqmmc to %d<->%d\n",
+ uvolt,
+ uvolt);
+ return (err);
+ }
+
+ return (0);
+}
+
+static int
sdhci_xenon_probe(device_t dev)
{
struct sdhci_xenon_softc *sc = device_get_softc(dev);
@@ -389,6 +456,11 @@ sdhci_xenon_probe(device_t dev)
if ((OF_getencprop(sc->node, "marvell,xenon-phy-zpr", &cid,
sizeof(cid))) > 0)
sc->zpr = cid & XENON_ZPR_MASK;
+ if (regulator_get_by_ofw_property(dev, 0, "vqmmc-supply",
+ &sc->reg_vqmmc) == 0 && bootverbose) {
+ if (bootverbose)
+ device_printf(dev, "vqmmc-supply regulator found\n");
+ }
return (0);
}
@@ -437,6 +509,12 @@ sdhci_xenon_attach(device_t dev)
slot->max_clk = sc->max_clk;
sc->slot = slot;
+ /*
+ * Set up any gpio pin handling described in the FDT data. This cannot
+ * fail; see comments in sdhci_fdt_gpio.h for details.
+ */
+ sc->gpio = sdhci_fdt_gpio_setup(dev, slot);
+
if (sdhci_init_slot(dev, sc->slot, 0))
goto fail;
@@ -497,6 +575,9 @@ sdhci_xenon_detach(device_t dev)
{
struct sdhci_xenon_softc *sc = device_get_softc(dev);
+ if (sc->gpio != NULL)
+ sdhci_fdt_gpio_teardown(sc->gpio);
+
bus_generic_detach(dev);
bus_teardown_intr(dev, sc->irq_res, sc->intrhand);
bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq_res),
@@ -526,6 +607,7 @@ static device_method_t sdhci_xenon_methods[] = {
DEVMETHOD(mmcbr_get_ro, sdhci_xenon_get_ro),
DEVMETHOD(mmcbr_acquire_host, sdhci_generic_acquire_host),
DEVMETHOD(mmcbr_release_host, sdhci_generic_release_host),
+ DEVMETHOD(mmcbr_switch_vccq, sdhci_xenon_switch_vccq),
/* SDHCI registers accessors */
DEVMETHOD(sdhci_read_1, sdhci_xenon_read_1),
@@ -536,6 +618,7 @@ static device_method_t sdhci_xenon_methods[] = {
DEVMETHOD(sdhci_write_2, sdhci_xenon_write_2),
DEVMETHOD(sdhci_write_4, sdhci_xenon_write_4),
DEVMETHOD(sdhci_write_multi_4, sdhci_xenon_write_multi_4),
+ DEVMETHOD(sdhci_get_card_present, sdhci_xenon_get_card_present),
DEVMETHOD_END
};
_______________________________________________
svn-src-head@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-head
To unsubscribe, send any mail to "svn-src-head-unsubscr...@freebsd.org"
