Author: ian
Date: Wed May 14 20:31:54 2014
New Revision: 266087
URL: http://svnweb.freebsd.org/changeset/base/266087
Log:
MFC r260695, r260696, r260884, r260885, r260886, r260887
Provide a simplified way to specify GPIO pins for the Atmel port.
Add at91 data so we can convert a PIO unit number into a base address.
Add at91 standard memory controller helper functions.
Generalize AT91 NAND support a bit.
Connect NAND for the SAM9260EK eval board, as well as the HotE HL-201.
Add nand device and NANDFS into the mix for those at91 boards that have
support for it at the moment.
Added:
stable/10/sys/arm/at91/at91_gpio.h
- copied unchanged from r260695, head/sys/arm/at91/at91_gpio.h
stable/10/sys/arm/at91/at91_smc.c
- copied unchanged from r260884, head/sys/arm/at91/at91_smc.c
stable/10/sys/arm/at91/at91_smc.h
- copied unchanged from r260884, head/sys/arm/at91/at91_smc.h
stable/10/sys/dev/nand/nfc_at91.h
- copied unchanged from r260885, head/sys/dev/nand/nfc_at91.h
Modified:
stable/10/sys/arm/at91/at91rm9200.c
stable/10/sys/arm/at91/at91sam9260.c
stable/10/sys/arm/at91/at91sam9g20.c
stable/10/sys/arm/at91/at91sam9g45.c
stable/10/sys/arm/at91/at91sam9x5.c
stable/10/sys/arm/at91/at91var.h
stable/10/sys/arm/at91/files.at91
stable/10/sys/arm/conf/ATMEL
stable/10/sys/arm/conf/HL201
stable/10/sys/arm/conf/SAM9260EK
stable/10/sys/dev/nand/nfc_at91.c
Directory Properties:
stable/10/ (props changed)
Copied: stable/10/sys/arm/at91/at91_gpio.h (from r260695,
head/sys/arm/at91/at91_gpio.h)
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ stable/10/sys/arm/at91/at91_gpio.h Wed May 14 20:31:54 2014
(r266087, copy of r260695, head/sys/arm/at91/at91_gpio.h)
@@ -0,0 +1,296 @@
+/*-
+ * Copyright (c) 2014 M. Warner Losh. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* $FreeBSD$ */
+
+#ifndef ARM_AT91_AT91_GPIO_H
+#define ARM_AT91_AT91_GPIO_H
+
+typedef uint32_t at91_pin_t;
+
+#define AT91_PIN_NONE 0xfffffffful /* No pin / Not GPIO controlled */
+
+/*
+ * Map Atmel PIO pins to a unique number. They are just numbered sequentially.
+ */
+
+#define AT91_PIN_PA0 (at91_pin_t)0
+#define AT91_PIN_PA1 (at91_pin_t)1
+#define AT91_PIN_PA2 (at91_pin_t)2
+#define AT91_PIN_PA3 (at91_pin_t)3
+#define AT91_PIN_PA4 (at91_pin_t)4
+#define AT91_PIN_PA5 (at91_pin_t)5
+#define AT91_PIN_PA6 (at91_pin_t)6
+#define AT91_PIN_PA7 (at91_pin_t)7
+#define AT91_PIN_PA8 (at91_pin_t)8
+#define AT91_PIN_PA9 (at91_pin_t)9
+#define AT91_PIN_PA10 (at91_pin_t)10
+#define AT91_PIN_PA11 (at91_pin_t)11
+#define AT91_PIN_PA12 (at91_pin_t)12
+#define AT91_PIN_PA13 (at91_pin_t)13
+#define AT91_PIN_PA14 (at91_pin_t)14
+#define AT91_PIN_PA15 (at91_pin_t)15
+#define AT91_PIN_PA16 (at91_pin_t)16
+#define AT91_PIN_PA17 (at91_pin_t)17
+#define AT91_PIN_PA18 (at91_pin_t)18
+#define AT91_PIN_PA19 (at91_pin_t)19
+#define AT91_PIN_PA20 (at91_pin_t)20
+#define AT91_PIN_PA21 (at91_pin_t)21
+#define AT91_PIN_PA22 (at91_pin_t)22
+#define AT91_PIN_PA23 (at91_pin_t)23
+#define AT91_PIN_PA24 (at91_pin_t)24
+#define AT91_PIN_PA25 (at91_pin_t)25
+#define AT91_PIN_PA26 (at91_pin_t)26
+#define AT91_PIN_PA27 (at91_pin_t)27
+#define AT91_PIN_PA28 (at91_pin_t)28
+#define AT91_PIN_PA29 (at91_pin_t)29
+#define AT91_PIN_PA30 (at91_pin_t)30
+#define AT91_PIN_PA31 (at91_pin_t)31
+#define AT91_PIN_PB0 (at91_pin_t)32
+#define AT91_PIN_PB1 (at91_pin_t)33
+#define AT91_PIN_PB2 (at91_pin_t)34
+#define AT91_PIN_PB3 (at91_pin_t)35
+#define AT91_PIN_PB4 (at91_pin_t)36
+#define AT91_PIN_PB5 (at91_pin_t)37
+#define AT91_PIN_PB6 (at91_pin_t)38
+#define AT91_PIN_PB7 (at91_pin_t)39
+#define AT91_PIN_PB8 (at91_pin_t)40
+#define AT91_PIN_PB9 (at91_pin_t)41
+#define AT91_PIN_PB10 (at91_pin_t)42
+#define AT91_PIN_PB11 (at91_pin_t)43
+#define AT91_PIN_PB12 (at91_pin_t)44
+#define AT91_PIN_PB13 (at91_pin_t)45
+#define AT91_PIN_PB14 (at91_pin_t)46
+#define AT91_PIN_PB15 (at91_pin_t)47
+#define AT91_PIN_PB16 (at91_pin_t)48
+#define AT91_PIN_PB17 (at91_pin_t)49
+#define AT91_PIN_PB18 (at91_pin_t)50
+#define AT91_PIN_PB19 (at91_pin_t)51
+#define AT91_PIN_PB20 (at91_pin_t)52
+#define AT91_PIN_PB21 (at91_pin_t)53
+#define AT91_PIN_PB22 (at91_pin_t)54
+#define AT91_PIN_PB23 (at91_pin_t)55
+#define AT91_PIN_PB24 (at91_pin_t)56
+#define AT91_PIN_PB25 (at91_pin_t)57
+#define AT91_PIN_PB26 (at91_pin_t)58
+#define AT91_PIN_PB27 (at91_pin_t)59
+#define AT91_PIN_PB28 (at91_pin_t)60
+#define AT91_PIN_PB29 (at91_pin_t)61
+#define AT91_PIN_PB30 (at91_pin_t)62
+#define AT91_PIN_PB31 (at91_pin_t)63
+#define AT91_PIN_PC0 (at91_pin_t)64
+#define AT91_PIN_PC1 (at91_pin_t)65
+#define AT91_PIN_PC2 (at91_pin_t)66
+#define AT91_PIN_PC3 (at91_pin_t)67
+#define AT91_PIN_PC4 (at91_pin_t)68
+#define AT91_PIN_PC5 (at91_pin_t)69
+#define AT91_PIN_PC6 (at91_pin_t)70
+#define AT91_PIN_PC7 (at91_pin_t)71
+#define AT91_PIN_PC8 (at91_pin_t)72
+#define AT91_PIN_PC9 (at91_pin_t)73
+#define AT91_PIN_PC10 (at91_pin_t)74
+#define AT91_PIN_PC11 (at91_pin_t)75
+#define AT91_PIN_PC12 (at91_pin_t)76
+#define AT91_PIN_PC13 (at91_pin_t)77
+#define AT91_PIN_PC14 (at91_pin_t)78
+#define AT91_PIN_PC15 (at91_pin_t)79
+#define AT91_PIN_PC16 (at91_pin_t)80
+#define AT91_PIN_PC17 (at91_pin_t)81
+#define AT91_PIN_PC18 (at91_pin_t)82
+#define AT91_PIN_PC19 (at91_pin_t)83
+#define AT91_PIN_PC20 (at91_pin_t)84
+#define AT91_PIN_PC21 (at91_pin_t)85
+#define AT91_PIN_PC22 (at91_pin_t)86
+#define AT91_PIN_PC23 (at91_pin_t)87
+#define AT91_PIN_PC24 (at91_pin_t)88
+#define AT91_PIN_PC25 (at91_pin_t)89
+#define AT91_PIN_PC26 (at91_pin_t)90
+#define AT91_PIN_PC27 (at91_pin_t)91
+#define AT91_PIN_PC28 (at91_pin_t)92
+#define AT91_PIN_PC29 (at91_pin_t)93
+#define AT91_PIN_PC30 (at91_pin_t)94
+#define AT91_PIN_PC31 (at91_pin_t)95
+#define AT91_PIN_PD0 (at91_pin_t)96
+#define AT91_PIN_PD1 (at91_pin_t)97
+#define AT91_PIN_PD2 (at91_pin_t)98
+#define AT91_PIN_PD3 (at91_pin_t)99
+#define AT91_PIN_PD4 (at91_pin_t)100
+#define AT91_PIN_PD5 (at91_pin_t)101
+#define AT91_PIN_PD6 (at91_pin_t)102
+#define AT91_PIN_PD7 (at91_pin_t)103
+#define AT91_PIN_PD8 (at91_pin_t)104
+#define AT91_PIN_PD9 (at91_pin_t)105
+#define AT91_PIN_PD10 (at91_pin_t)106
+#define AT91_PIN_PD11 (at91_pin_t)107
+#define AT91_PIN_PD12 (at91_pin_t)108
+#define AT91_PIN_PD13 (at91_pin_t)109
+#define AT91_PIN_PD14 (at91_pin_t)110
+#define AT91_PIN_PD15 (at91_pin_t)111
+#define AT91_PIN_PD16 (at91_pin_t)112
+#define AT91_PIN_PD17 (at91_pin_t)113
+#define AT91_PIN_PD18 (at91_pin_t)114
+#define AT91_PIN_PD19 (at91_pin_t)115
+#define AT91_PIN_PD20 (at91_pin_t)116
+#define AT91_PIN_PD21 (at91_pin_t)117
+#define AT91_PIN_PD22 (at91_pin_t)118
+#define AT91_PIN_PD23 (at91_pin_t)119
+#define AT91_PIN_PD24 (at91_pin_t)120
+#define AT91_PIN_PD25 (at91_pin_t)121
+#define AT91_PIN_PD26 (at91_pin_t)122
+#define AT91_PIN_PD27 (at91_pin_t)123
+#define AT91_PIN_PD28 (at91_pin_t)124
+#define AT91_PIN_PD29 (at91_pin_t)125
+#define AT91_PIN_PD30 (at91_pin_t)126
+#define AT91_PIN_PD31 (at91_pin_t)127
+#define AT91_PIN_PE0 (at91_pin_t)128
+#define AT91_PIN_PE1 (at91_pin_t)129
+#define AT91_PIN_PE2 (at91_pin_t)130
+#define AT91_PIN_PE3 (at91_pin_t)131
+#define AT91_PIN_PE4 (at91_pin_t)132
+#define AT91_PIN_PE5 (at91_pin_t)133
+#define AT91_PIN_PE6 (at91_pin_t)134
+#define AT91_PIN_PE7 (at91_pin_t)135
+#define AT91_PIN_PE8 (at91_pin_t)136
+#define AT91_PIN_PE9 (at91_pin_t)137
+#define AT91_PIN_PE10 (at91_pin_t)138
+#define AT91_PIN_PE11 (at91_pin_t)139
+#define AT91_PIN_PE12 (at91_pin_t)140
+#define AT91_PIN_PE13 (at91_pin_t)141
+#define AT91_PIN_PE14 (at91_pin_t)142
+#define AT91_PIN_PE15 (at91_pin_t)143
+#define AT91_PIN_PE16 (at91_pin_t)144
+#define AT91_PIN_PE17 (at91_pin_t)145
+#define AT91_PIN_PE18 (at91_pin_t)146
+#define AT91_PIN_PE19 (at91_pin_t)147
+#define AT91_PIN_PE20 (at91_pin_t)148
+#define AT91_PIN_PE21 (at91_pin_t)149
+#define AT91_PIN_PE22 (at91_pin_t)150
+#define AT91_PIN_PE23 (at91_pin_t)151
+#define AT91_PIN_PE24 (at91_pin_t)152
+#define AT91_PIN_PE25 (at91_pin_t)153
+#define AT91_PIN_PE26 (at91_pin_t)154
+#define AT91_PIN_PE27 (at91_pin_t)155
+#define AT91_PIN_PE28 (at91_pin_t)156
+#define AT91_PIN_PE29 (at91_pin_t)157
+#define AT91_PIN_PE30 (at91_pin_t)158
+#define AT91_PIN_PE31 (at91_pin_t)159
+#define AT91_PIN_PF0 (at91_pin_t)160
+#define AT91_PIN_PF1 (at91_pin_t)161
+#define AT91_PIN_PF2 (at91_pin_t)162
+#define AT91_PIN_PF3 (at91_pin_t)163
+#define AT91_PIN_PF4 (at91_pin_t)164
+#define AT91_PIN_PF5 (at91_pin_t)165
+#define AT91_PIN_PF6 (at91_pin_t)166
+#define AT91_PIN_PF7 (at91_pin_t)167
+#define AT91_PIN_PF8 (at91_pin_t)168
+#define AT91_PIN_PF9 (at91_pin_t)169
+#define AT91_PIN_PF10 (at91_pin_t)170
+#define AT91_PIN_PF11 (at91_pin_t)171
+#define AT91_PIN_PF12 (at91_pin_t)172
+#define AT91_PIN_PF13 (at91_pin_t)173
+#define AT91_PIN_PF14 (at91_pin_t)174
+#define AT91_PIN_PF15 (at91_pin_t)175
+#define AT91_PIN_PF16 (at91_pin_t)176
+#define AT91_PIN_PF17 (at91_pin_t)177
+#define AT91_PIN_PF18 (at91_pin_t)178
+#define AT91_PIN_PF19 (at91_pin_t)179
+#define AT91_PIN_PF20 (at91_pin_t)180
+#define AT91_PIN_PF21 (at91_pin_t)181
+#define AT91_PIN_PF22 (at91_pin_t)182
+#define AT91_PIN_PF23 (at91_pin_t)183
+#define AT91_PIN_PF24 (at91_pin_t)184
+#define AT91_PIN_PF25 (at91_pin_t)185
+#define AT91_PIN_PF26 (at91_pin_t)186
+#define AT91_PIN_PF27 (at91_pin_t)187
+#define AT91_PIN_PF28 (at91_pin_t)188
+#define AT91_PIN_PF29 (at91_pin_t)189
+#define AT91_PIN_PF30 (at91_pin_t)190
+#define AT91_PIN_PF31 (at91_pin_t)191
+#define AT91_PIN_PG0 (at91_pin_t)192
+#define AT91_PIN_PG1 (at91_pin_t)193
+#define AT91_PIN_PG2 (at91_pin_t)194
+#define AT91_PIN_PG3 (at91_pin_t)195
+#define AT91_PIN_PG4 (at91_pin_t)196
+#define AT91_PIN_PG5 (at91_pin_t)197
+#define AT91_PIN_PG6 (at91_pin_t)198
+#define AT91_PIN_PG7 (at91_pin_t)199
+#define AT91_PIN_PG8 (at91_pin_t)200
+#define AT91_PIN_PG9 (at91_pin_t)201
+#define AT91_PIN_PG10 (at91_pin_t)202
+#define AT91_PIN_PG11 (at91_pin_t)203
+#define AT91_PIN_PG12 (at91_pin_t)204
+#define AT91_PIN_PG13 (at91_pin_t)205
+#define AT91_PIN_PG14 (at91_pin_t)206
+#define AT91_PIN_PG15 (at91_pin_t)207
+#define AT91_PIN_PG16 (at91_pin_t)208
+#define AT91_PIN_PG17 (at91_pin_t)209
+#define AT91_PIN_PG18 (at91_pin_t)210
+#define AT91_PIN_PG19 (at91_pin_t)211
+#define AT91_PIN_PG20 (at91_pin_t)212
+#define AT91_PIN_PG21 (at91_pin_t)213
+#define AT91_PIN_PG22 (at91_pin_t)214
+#define AT91_PIN_PG23 (at91_pin_t)215
+#define AT91_PIN_PG24 (at91_pin_t)216
+#define AT91_PIN_PG25 (at91_pin_t)217
+#define AT91_PIN_PG26 (at91_pin_t)218
+#define AT91_PIN_PG27 (at91_pin_t)219
+#define AT91_PIN_PG28 (at91_pin_t)220
+#define AT91_PIN_PG29 (at91_pin_t)221
+#define AT91_PIN_PG30 (at91_pin_t)222
+#define AT91_PIN_PG31 (at91_pin_t)223
+#define AT91_PIN_PH0 (at91_pin_t)224
+#define AT91_PIN_PH1 (at91_pin_t)225
+#define AT91_PIN_PH2 (at91_pin_t)226
+#define AT91_PIN_PH3 (at91_pin_t)227
+#define AT91_PIN_PH4 (at91_pin_t)228
+#define AT91_PIN_PH5 (at91_pin_t)229
+#define AT91_PIN_PH6 (at91_pin_t)230
+#define AT91_PIN_PH7 (at91_pin_t)231
+#define AT91_PIN_PH8 (at91_pin_t)232
+#define AT91_PIN_PH9 (at91_pin_t)233
+#define AT91_PIN_PH10 (at91_pin_t)234
+#define AT91_PIN_PH11 (at91_pin_t)235
+#define AT91_PIN_PH12 (at91_pin_t)236
+#define AT91_PIN_PH13 (at91_pin_t)237
+#define AT91_PIN_PH14 (at91_pin_t)238
+#define AT91_PIN_PH15 (at91_pin_t)239
+#define AT91_PIN_PH16 (at91_pin_t)240
+#define AT91_PIN_PH17 (at91_pin_t)241
+#define AT91_PIN_PH18 (at91_pin_t)242
+#define AT91_PIN_PH19 (at91_pin_t)243
+#define AT91_PIN_PH20 (at91_pin_t)244
+#define AT91_PIN_PH21 (at91_pin_t)245
+#define AT91_PIN_PH22 (at91_pin_t)246
+#define AT91_PIN_PH23 (at91_pin_t)247
+#define AT91_PIN_PH24 (at91_pin_t)248
+#define AT91_PIN_PH25 (at91_pin_t)249
+#define AT91_PIN_PH26 (at91_pin_t)250
+#define AT91_PIN_PH27 (at91_pin_t)251
+#define AT91_PIN_PH28 (at91_pin_t)252
+#define AT91_PIN_PH29 (at91_pin_t)253
+#define AT91_PIN_PH30 (at91_pin_t)254
+#define AT91_PIN_PH31 (at91_pin_t)255
+
+#endif /* ARM_AT91_AT91_GPIO_H */
Copied: stable/10/sys/arm/at91/at91_smc.c (from r260884,
head/sys/arm/at91/at91_smc.c)
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ stable/10/sys/arm/at91/at91_smc.c Wed May 14 20:31:54 2014
(r266087, copy of r260884, head/sys/arm/at91/at91_smc.c)
@@ -0,0 +1,91 @@
+/*-
+ * Copyright (c) 2014 M. Warner Losh. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/types.h>
+
+#include <arm/at91/at91reg.h>
+#include <arm/at91/at91_smc.h>
+#include <arm/at91/at91sam9260reg.h>
+
+/*
+ * RD4HW()/WR4HW() read and write at91 hardware register space directly. They
+ * serve the same purpose as the RD4()/WR4() idiom you see in many drivers,
+ * except that those translate to bus_space calls, but in this code we need to
+ * access some devices before bus_space is ready to use. Of course for this to
+ * work the appropriate static device mappings need to be made in machdep.c.
+ */
+static inline uint32_t
+RD4HW(uint32_t devbase, uint32_t regoff)
+{
+
+ return *(volatile uint32_t *)(AT91_BASE + devbase + regoff);
+}
+
+
+static inline void
+WR4HW(uint32_t devbase, uint32_t regoff, uint32_t val)
+{
+
+ *(volatile uint32_t *)(AT91_BASE + devbase + regoff) = val;
+}
+
+
+void
+at91_smc_setup(int id, int cs, const struct at91_smc_init *smc)
+{
+ // Need a generic way to get this address for all SoCs... Assume 9260
for now...
+ uint32_t base = AT91SAM9260_SMC_BASE + SMC_CS_OFF(cs);
+
+ WR4HW(base, SMC_SETUP, SMC_SETUP_NCS_RD_SETUP(smc->ncs_rd_setup) |
+ SMC_SETUP_NRD_SETUP(smc->nrd_setup) |
+ SMC_SETUP_NCS_WR_SETUP(smc->ncs_wr_setup) |
+ SMC_SETUP_NWE_SETUP(smc->nwe_setup));
+ WR4HW(base, SMC_PULSE, SMC_PULSE_NCS_RD_PULSE(smc->ncs_rd_pulse) |
+ SMC_PULSE_NRD_PULSE(smc->nrd_pulse) |
+ SMC_PULSE_NCS_WR_PULSE(smc->ncs_wr_pulse) |
+ SMC_PULSE_NWE_PULSE(smc->nwe_pulse));
+ WR4HW(base, SMC_CYCLE, SMC_CYCLE_NRD_CYCLE(smc->nrd_cycle) |
+ SMC_CYCLE_NWE_CYCLE(smc->nwe_cycle));
+ WR4HW(base, SMC_MODE, smc->mode | SMC_MODE_TDF_CYCLES(smc->tdf_cycles));
+}
+
+void
+at91_ebi_enable(int bank)
+{
+
+ WR4HW(AT91SAM9260_MATRIX_BASE, AT91SAM9260_EBICSA, (1 << bank) |
+ RD4HW(AT91SAM9260_MATRIX_BASE, AT91SAM9260_EBICSA));
+}
+
+void
+at91_ebi_disable(int bank)
+{
+
+ WR4HW(AT91SAM9260_MATRIX_BASE, AT91SAM9260_EBICSA, ~(1 << bank) &
+ RD4HW(AT91SAM9260_MATRIX_BASE, AT91SAM9260_EBICSA));
+}
Copied: stable/10/sys/arm/at91/at91_smc.h (from r260884,
head/sys/arm/at91/at91_smc.h)
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ stable/10/sys/arm/at91/at91_smc.h Wed May 14 20:31:54 2014
(r266087, copy of r260884, head/sys/arm/at91/at91_smc.h)
@@ -0,0 +1,116 @@
+/*-
+ * Copyright (c) 2014 M. Warner Losh. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* $FreeBSD$ */
+
+#ifndef ARM_AT91_AT91_SMC_H
+#define ARM_AT91_AT91_SMC_H
+
+/* Registers */
+#define SMC_SETUP 0x00
+#define SMC_PULSE 0x04
+#define SMC_CYCLE 0x08
+#define SMC_MODE 0x0C
+
+#define SMC_CS_OFF(cs) (0x10 * (cs))
+
+/* Setup */
+#define SMC_SETUP_NCS_RD_SETUP(x) ((x) << 24)
+#define SMC_SETUP_NRD_SETUP(x) ((x) << 16)
+#define SMC_SETUP_NCS_WR_SETUP(x) ((x) << 8)
+#define SMC_SETUP_NWE_SETUP(x) (x)
+
+/* Pulse */
+#define SMC_PULSE_NCS_RD_PULSE(x) ((x) << 24)
+#define SMC_PULSE_NRD_PULSE(x) ((x) << 16)
+#define SMC_PULSE_NCS_WR_PULSE(x) ((x) << 8)
+#define SMC_PULSE_NWE_PULSE(x) (x)
+
+/* Cycle */
+#define SMC_CYCLE_NRD_CYCLE(x) ((x) << 16)
+#define SMC_CYCLE_NWE_CYCLE(x) (x)
+
+/* Mode */
+#define SMC_MODE_READ (1 << 0)
+#define SMC_MODE_WRITE (1 << 1)
+#define SMC_MODE_EXNW_DISABLED (0 << 4)
+#define SMC_MODE_EXNW_FROZEN_MODE (2 << 4)
+#define SMC_MODE_EXNW_READY_MODE (3 << 4)
+#define SMC_MODE_BAT (1 << 8)
+#define SMC_MODE_DBW_8BIT (0 << 12)
+#define SMC_MODE_DBW_16BIT (1 << 12)
+#define SMC_MODE_DBW_32_BIT (2 << 12)
+#define SMC_MODE_TDF_CYCLES(x) ((x) << 16)
+#define SMC_MODE_TDF_MODE (1 << 20)
+#define SMC_MODE_PMEN (1 << 24)
+#define SMC_PS_4BYTE (0 << 28)
+#define SMC_PS_8BYTE (1 << 28)
+#define SMC_PS_16BYTE (2 << 28)
+#define SMC_PS_32BYTE (3 << 28)
+
+/*
+ * structure to ease init. See the SMC chapter in the datasheet for
+ * the appropriate SoC you are using for details.
+ */
+struct at91_smc_init
+{
+ /* Setup register */
+ uint8_t ncs_rd_setup;
+ uint8_t nrd_setup;
+ uint8_t ncs_wr_setup;
+ uint8_t nwe_setup;
+
+ /* Pulse register */
+ uint8_t ncs_rd_pulse;
+ uint8_t nrd_pulse;
+ uint8_t ncs_wr_pulse;
+ uint8_t nwe_pulse;
+
+ /* Cycle register */
+ uint16_t nrd_cycle;
+ uint16_t nwe_cycle;
+
+ /* Mode register */
+ uint8_t mode; /* Combo of READ/WRITE/EXNW fields */
+ uint8_t bat;
+ uint8_t dwb;
+ uint8_t tdf_cycles;
+ uint8_t tdf_mode;
+ uint8_t pmen;
+ uint8_t ps;
+};
+
+/*
+ * Convenience routine to fill in SMC registers for a given chip select.
+ */
+void at91_smc_setup(int id, int cs, const struct at91_smc_init *smc);
+
+/*
+ * Disable/Enable different External Bus Interfaces (EBI)
+ */
+void at91_ebi_enable(int cs);
+void at91_ebi_disable(int cs);
+
+#endif /* ARM_AT91_AT91_SMC_H */
Modified: stable/10/sys/arm/at91/at91rm9200.c
==============================================================================
--- stable/10/sys/arm/at91/at91rm9200.c Wed May 14 20:17:31 2014
(r266086)
+++ stable/10/sys/arm/at91/at91rm9200.c Wed May 14 20:31:54 2014
(r266087)
@@ -88,6 +88,13 @@ static const int at91_irq_prio[32] =
0 /* Advanced Interrupt Controller (IRQ6) */
};
+static const uint32_t at91_pio_base[] = {
+ AT91RM92_PIOA_BASE,
+ AT91RM92_PIOB_BASE,
+ AT91RM92_PIOC_BASE,
+ AT91RM92_PIOD_BASE,
+};
+
#define DEVICE(_name, _id, _unit) \
{ \
_name, _unit, \
@@ -195,6 +202,8 @@ static struct at91_soc_data soc_data = {
.soc_clock_init = at91_clock_init,
.soc_irq_prio = at91_irq_prio,
.soc_children = at91_devs,
+ .soc_pio_base = at91_pio_base,
+ .soc_pio_count = nitems(at91_pio_base),
};
AT91_SOC(AT91_T_RM9200, &soc_data);
Modified: stable/10/sys/arm/at91/at91sam9260.c
==============================================================================
--- stable/10/sys/arm/at91/at91sam9260.c Wed May 14 20:17:31 2014
(r266086)
+++ stable/10/sys/arm/at91/at91sam9260.c Wed May 14 20:31:54 2014
(r266087)
@@ -87,6 +87,12 @@ static const int at91_irq_prio[32] =
0, /* Advanced Interrupt Controller IRQ2 */
};
+static const uint32_t at91_pio_base[] = {
+ AT91SAM9260_PIOA_BASE,
+ AT91SAM9260_PIOB_BASE,
+ AT91SAM9260_PIOC_BASE,
+};
+
#define DEVICE(_name, _id, _unit) \
{ \
_name, _unit, \
@@ -204,6 +210,8 @@ static struct at91_soc_data soc_data = {
.soc_clock_init = at91_clock_init,
.soc_irq_prio = at91_irq_prio,
.soc_children = at91_devs,
+ .soc_pio_base = at91_pio_base,
+ .soc_pio_count = nitems(at91_pio_base),
};
AT91_SOC(AT91_T_SAM9260, &soc_data);
Modified: stable/10/sys/arm/at91/at91sam9g20.c
==============================================================================
--- stable/10/sys/arm/at91/at91sam9g20.c Wed May 14 20:17:31 2014
(r266086)
+++ stable/10/sys/arm/at91/at91sam9g20.c Wed May 14 20:31:54 2014
(r266087)
@@ -87,6 +87,12 @@ static const int at91_irq_prio[32] =
0, /* Advanced Interrupt Controller IRQ2 */
};
+static const uint32_t at91_pio_base[] = {
+ AT91SAM9G20_PIOA_BASE,
+ AT91SAM9G20_PIOB_BASE,
+ AT91SAM9G20_PIOC_BASE,
+};
+
#define DEVICE(_name, _id, _unit) \
{ \
_name, _unit, \
@@ -169,6 +175,8 @@ static struct at91_soc_data soc_data = {
.soc_clock_init = at91_clock_init,
.soc_irq_prio = at91_irq_prio,
.soc_children = at91_devs,
+ .soc_pio_base = at91_pio_base,
+ .soc_pio_count = nitems(at91_pio_base),
};
AT91_SOC(AT91_T_SAM9G20, &soc_data);
Modified: stable/10/sys/arm/at91/at91sam9g45.c
==============================================================================
--- stable/10/sys/arm/at91/at91sam9g45.c Wed May 14 20:17:31 2014
(r266086)
+++ stable/10/sys/arm/at91/at91sam9g45.c Wed May 14 20:31:54 2014
(r266087)
@@ -88,6 +88,14 @@ static const int at91_irq_prio[32] =
0, /* Advanced Interrupt Controller IRQ0 */
};
+static const uint32_t at91_pio_base[] = {
+ AT91SAM9G45_PIOA_BASE,
+ AT91SAM9G45_PIOB_BASE,
+ AT91SAM9G45_PIOC_BASE,
+ AT91SAM9G45_PIOD_BASE,
+ AT91SAM9G45_PIOE_BASE,
+};
+
#define DEVICE(_name, _id, _unit) \
{ \
_name, _unit, \
@@ -155,6 +163,8 @@ static struct at91_soc_data soc_data = {
.soc_clock_init = at91_clock_init,
.soc_irq_prio = at91_irq_prio,
.soc_children = at91_devs,
+ .soc_pio_base = at91_pio_base,
+ .soc_pio_count = nitems(at91_pio_base),
};
AT91_SOC(AT91_T_SAM9G45, &soc_data);
Modified: stable/10/sys/arm/at91/at91sam9x5.c
==============================================================================
--- stable/10/sys/arm/at91/at91sam9x5.c Wed May 14 20:17:31 2014
(r266086)
+++ stable/10/sys/arm/at91/at91sam9x5.c Wed May 14 20:31:54 2014
(r266087)
@@ -87,6 +87,13 @@ static const int at91_irq_prio[32] =
0, /* Advanced Interrupt Controller (IRQ0) */
};
+static const uint32_t at91_pio_base[] = {
+ AT91SAM9X25_PIOA_BASE,
+ AT91SAM9X25_PIOB_BASE,
+ AT91SAM9X25_PIOC_BASE,
+ AT91SAM9X25_PIOD_BASE,
+};
+
#define DEVICE(_name, _id, _unit) \
{ \
_name, _unit, \
@@ -172,6 +179,8 @@ static struct at91_soc_data soc_data = {
.soc_clock_init = at91_clock_init,
.soc_irq_prio = at91_irq_prio,
.soc_children = at91_devs,
+ .soc_pio_base = at91_pio_base,
+ .soc_pio_count = nitems(at91_pio_base),
};
AT91_SOC_SUB(AT91_T_SAM9X5, AT91_ST_SAM9X25, &soc_data);
Modified: stable/10/sys/arm/at91/at91var.h
==============================================================================
--- stable/10/sys/arm/at91/at91var.h Wed May 14 20:17:31 2014
(r266086)
+++ stable/10/sys/arm/at91/at91var.h Wed May 14 20:31:54 2014
(r266087)
@@ -107,11 +107,13 @@ typedef void (*cpu_reset_t)(void);
typedef void (*clk_init_t)(void);
struct at91_soc_data {
- DELAY_t soc_delay;
- cpu_reset_t soc_reset;
- clk_init_t soc_clock_init;
- const int *soc_irq_prio;
- const struct cpu_devs *soc_children;
+ DELAY_t soc_delay; /* SoC specific delay function
*/
+ cpu_reset_t soc_reset; /* SoC specific reset function
*/
+ clk_init_t soc_clock_init; /* SoC specific clock init
function */
+ const int *soc_irq_prio; /* SoC specific IRQ priorities
*/
+ const struct cpu_devs *soc_children; /* SoC specific children list */
+ const uint32_t *soc_pio_base; /* SoC specific PIO base
registers */
+ size_t soc_pio_count; /* Count of PIO units (not
pins) in SoC */
};
struct at91_soc_info {
Modified: stable/10/sys/arm/at91/files.at91
==============================================================================
--- stable/10/sys/arm/at91/files.at91 Wed May 14 20:17:31 2014
(r266086)
+++ stable/10/sys/arm/at91/files.at91 Wed May 14 20:31:54 2014
(r266087)
@@ -12,6 +12,7 @@ arm/at91/at91_pit.c optional at91sam9
arm/at91/at91_reset.S optional at91sam9
arm/at91/at91_rst.c optional at91sam9
arm/at91/at91_rtc.c optional at91_rtc
+arm/at91/at91_smc.c standard
arm/at91/at91_spi.c optional at91_spi \
dependency "spibus_if.h"
arm/at91/at91_ssc.c optional at91_ssc
Modified: stable/10/sys/arm/conf/ATMEL
==============================================================================
--- stable/10/sys/arm/conf/ATMEL Wed May 14 20:17:31 2014
(r266086)
+++ stable/10/sys/arm/conf/ATMEL Wed May 14 20:31:54 2014
(r266087)
@@ -175,3 +175,6 @@ device at91_wdt # Atmel AT91 Watchdog T
device at91_rtc
device at91_ssc
#device at91_tc # missing?
+
+# NAND Flash - Reference design has Samsung 256MB but others possible
+device nand # NAND interface on CS3
Modified: stable/10/sys/arm/conf/HL201
==============================================================================
--- stable/10/sys/arm/conf/HL201 Wed May 14 20:17:31 2014
(r266086)
+++ stable/10/sys/arm/conf/HL201 Wed May 14 20:31:54 2014
(r266087)
@@ -37,7 +37,8 @@ options FFS #Berkeley Fast
Filesystem
#options UFS_ACL #Support for access control lists
#options UFS_DIRHASH #Improve performance on big directories
#options MD_ROOT #MD is a potential root device
-#options MD_ROOT_SIZE=4096 # 3MB ram disk
+#options MD_ROOT_SIZE=4096 # 4MB ram disk
+options NANDFS # NAND file system
#options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\"
options NFSCL #New Network Filesystem Client
#options NFSD #New Network Filesystem Server
@@ -131,3 +132,5 @@ device pass # Passthrough device
(dire
#device wlan_amrr # AMRR transmit rate control algorithm
options ROOTDEVNAME=\"ufs:da0s1a\"
+# NAND Flash - my board as 128MB Samsung part
+device nand # NAND interface on CS3
Modified: stable/10/sys/arm/conf/SAM9260EK
==============================================================================
--- stable/10/sys/arm/conf/SAM9260EK Wed May 14 20:17:31 2014
(r266086)
+++ stable/10/sys/arm/conf/SAM9260EK Wed May 14 20:31:54 2014
(r266087)
@@ -1,4 +1,4 @@
-# Kernel configuration for Ethernut 5 boards
+# Kernel configuration for Atmel SAM9260-EK eval board
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
@@ -37,6 +37,7 @@ options SOFTUPDATES # Enable FFS soft
options UFS_DIRHASH # Improve performance on big directories
#options UFS_GJOURNAL # Enable gjournal-based UFS journaling
#options MD_ROOT # MD is a potential root device
+options NANDFS # NAND file system
options NFSCL # New Network Filesystem Client
#options NFSD # New Network Filesystem Server
options NFSLOCKD # Network Lock Manager
@@ -165,3 +166,6 @@ device umass # Disks/Mass storage -
Re
# watchdog
device at91_wdt # Atmel AT91 Watchdog Timer
+
+# NAND Flash - Reference design has Samsung 256MB but others possible
+device nand # NAND interface on CS3
Modified: stable/10/sys/dev/nand/nfc_at91.c
==============================================================================
--- stable/10/sys/dev/nand/nfc_at91.c Wed May 14 20:17:31 2014
(r266086)
+++ stable/10/sys/dev/nand/nfc_at91.c Wed May 14 20:31:54 2014
(r266087)
@@ -54,23 +54,29 @@ __FBSDID("$FreeBSD$");
#include <dev/nand/nandbus.h>
#include "nfc_if.h"
+#include <dev/nand/nfc_at91.h>
+#include <arm/at91/at91_smc.h>
+
/*
* Data cycles are triggered by access to any address within the EBI CS3 region
* that has A21 and A22 clear. Command cycles are any access with bit A21
- * asserted. Address cycles are any access with bit A22 asserted.
- *
- * XXX The atmel docs say that any address bits can be used instead of A21 and
- * A22; these values should be configurable.
+ * asserted. Address cycles are any access with bit A22 asserted. Or vice
versa.
+ * We get these parameters from the nand_param that the board is required to
+ * call at91_enable_nand, and enable the GPIO lines properly (that will be
moved
+ * into at91_enable_nand when the great GPIO pin renumbering happens). We use
+ * ale (Address Latch Enable) and cle (Comand Latch Enable) to match the
hardware
+ * names used in NAND.
*/
#define AT91_NAND_DATA 0
-#define AT91_NAND_COMMAND (1 << 21)
-#define AT91_NAND_ADDRESS (1 << 22)
struct at91_nand_softc {
struct nand_softc nand_sc;
struct resource *res;
+ struct at91_nand_params *nand_param;
};
+static struct at91_nand_params nand_param;
+
static int at91_nand_attach(device_t);
static int at91_nand_probe(device_t);
static uint8_t at91_nand_read_byte(device_t);
@@ -81,6 +87,12 @@ static int at91_nand_send_command(device
static int at91_nand_send_address(device_t, uint8_t);
static void at91_nand_write_buf(device_t, void *, uint32_t);
+void
+at91_enable_nand(const struct at91_nand_params *np)
+{
+ nand_param = *np;
+}
+
static inline u_int8_t
dev_read_1(struct at91_nand_softc *sc, bus_size_t offset)
{
@@ -108,6 +120,14 @@ at91_nand_attach(device_t dev)
int err, rid;
sc = device_get_softc(dev);
+ sc->nand_param = &nand_param;
+ if (sc->nand_param->width != 8 && sc->nand_param->width != 16) {
+ device_printf(dev, "Bad bus width (%d) defaulting to 8 bits\n",
+ sc->nand_param->width);
+ sc->nand_param->width = 8;
+ }
+ at91_ebi_enable(sc->nand_param->cs);
+
rid = 0;
sc->res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
@@ -128,10 +148,10 @@ at91_nand_send_command(device_t dev, uin
{
struct at91_nand_softc *sc;
- /* nand_debug(NDBG_DRV,"at91_nand_send_command: 0x%02x", command); */
+ nand_debug(NDBG_DRV,"at91_nand_send_command: 0x%02x", command);
sc = device_get_softc(dev);
- dev_write_1(sc, AT91_NAND_COMMAND, command);
+ dev_write_1(sc, sc->nand_param->cle, command);
return (0);
}
@@ -140,10 +160,10 @@ at91_nand_send_address(device_t dev, uin
{
struct at91_nand_softc *sc;
- /* nand_debug(NDBG_DRV,"at91_nand_send_address: x%02x", addr); */
+ nand_debug(NDBG_DRV,"at91_nand_send_address: x%02x", addr);
sc = device_get_softc(dev);
- dev_write_1(sc, AT91_NAND_ADDRESS, addr);
+ dev_write_1(sc, sc->nand_param->ale, addr);
return (0);
}
@@ -156,7 +176,7 @@ at91_nand_read_byte(device_t dev)
sc = device_get_softc(dev);
data = dev_read_1(sc, AT91_NAND_DATA);
- /* nand_debug(NDBG_DRV,"at91_nand_read_byte: 0x%02x", data); */
+ nand_debug(NDBG_DRV,"at91_nand_read_byte: 0x%02x", data);
return (data);
}
Copied: stable/10/sys/dev/nand/nfc_at91.h (from r260885,
head/sys/dev/nand/nfc_at91.h)
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ stable/10/sys/dev/nand/nfc_at91.h Wed May 14 20:31:54 2014
(r266087, copy of r260885, head/sys/dev/nand/nfc_at91.h)
@@ -0,0 +1,50 @@
+/*-
+ * Copyright (C) 2014 Warner Losh.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+/*
+ * Atmel at91-family integrated NAND controller driver.
+ *
+ * Interface to board setup code to set parameters.
+ */
+
+#ifndef DEV_NAND_NFC_AT91_H
+#define DEV_NAND_NFC_AT91_H 1
+
+struct at91_nand_params
+{
+ uint32_t ale; /* Address for ALE (address) NAND
cycles */
+ uint32_t cle; /* Address for CLE (command) NAND
cycles */
+ uint32_t width; /* 8 or 16 bits (specify in bits) */
+ uint32_t cs; /* Chip Select NAND is connected to */
+ uint32_t rnb_pin; /* GPIO pin # for Read/notBusy */
+ uint32_t nce_pin; /* GPIO pin # for CE (active low) */
+};
+
+void at91_enable_nand(const struct at91_nand_params *);
+
+#endif /* DEV_NAND_NFC_AT91_H */
_______________________________________________
svn-src-all@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
