Author: imp Date: Wed Jan 22 22:01:29 2014 New Revision: 261041 URL: http://svnweb.freebsd.org/changeset/base/261041
Log: Clean up HL201 config (for the hot-e 201 and 101 models from thinlinx). Make comments match parameters Add options for early printf so we get regression build testing on it. Add preview of options for FDT support coming soon (I hope) Modified: head/sys/arm/conf/HL201 Modified: head/sys/arm/conf/HL201 ============================================================================== --- head/sys/arm/conf/HL201 Wed Jan 22 21:49:20 2014 (r261040) +++ head/sys/arm/conf/HL201 Wed Jan 22 22:01:29 2014 (r261041) @@ -1,4 +1,4 @@ -# Kernel configuration for the AT91SAM9 based Hot-e configuration file +# Kernel configuration for the AT91SAM9G20 based Hot-e configuration file # # For more information on this file, please read the handbook section on # Kernel Configuration Files: @@ -39,16 +39,16 @@ options FFS #Berkeley Fast Filesystem #options MD_ROOT #MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NANDFS # NAND file system -#options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" +options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options NFSCL #New Network Filesystem Client #options NFSD #New Network Filesystem Server #options NFSLOCKD #Network Lock Manager options NFS_ROOT #NFS usable as /, requires NFSCL -options BOOTP_NFSROOT -options BOOTP -options BOOTP_NFSV3 +#options BOOTP_NFSROOT +#options BOOTP +#options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 -options BOOTP_COMPAT +#options BOOTP_COMPAT options ALT_BREAK_TO_DEBUGGER @@ -62,7 +62,6 @@ options SYSVSHM #SYSV-style shared me options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions -#options SYSCTL_OMIT_DESCR options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT @@ -83,22 +82,11 @@ device mii #options DIAGNOSTIC device md -#device at91_twi # TWI: Two Wire Interface -#device at91_spi # SPI: -device spibus -# MMC/SD -#device at91_mci -#device mmc -#device mmcsd -# iic -device iic -device iicbus -device icee - device bpf + # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. -#device ohci # OHCI localbus->USB interface +device ohci # OHCI localbus->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device uhid # "Human Interface Devices" @@ -132,5 +120,14 @@ device pass # Passthrough device (dire #device wlan_amrr # AMRR transmit rate control algorithm options ROOTDEVNAME=\"ufs:da0s1a\" -# NAND Flash - my board as 128MB Samsung part -device nand # NAND interface on CS3 +# NAND Flash - my board as 128MB Samsung part, YMMV. +device nand # NAND interface on CS3 + +# Coming soon, but not yet +#options FDT +#options FDT_DTB_STATIC +#makeoptions FDT_DTS_FILE=at91sam9g20ek.dts + +options EARLY_PRINTF +options SOCDEV_PA=0xfc000000 +options SOCDEV_VA=0xdc000000 _______________________________________________ svn-src-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
