Author: ian Date: Sun Oct 20 21:21:07 2013 New Revision: 256809 URL: http://svnweb.freebsd.org/changeset/base/256809
Log: Add configuration for the Freescale i.MX53 Quick Start Board. Added: head/sys/arm/conf/IMX53-QSB (contents, props changed) head/sys/boot/fdt/dts/imx53-qsb.dts (contents, props changed) Added: head/sys/arm/conf/IMX53-QSB ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/arm/conf/IMX53-QSB Sun Oct 20 21:21:07 2013 (r256809) @@ -0,0 +1,179 @@ +# Kernel configuration for Freescale i.MX53 Quick Start Board +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ + +ident IMX53-QSB + +include "../freescale/imx/std.imx53" + +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +#options DEBUG + +options HZ=250 # 4ms scheduling quantum +options SCHED_4BSD # 4BSD scheduler +#options PREEMPTION # Enable kernel thread preemption +options INET # InterNETworking +options INET6 # IPv6 communications protocols +#options SCTP # Stream Control Transmission Protocol +options FFS # Berkeley Fast Filesystem +options SOFTUPDATES # Enable FFS soft updates support +options UFS_ACL # Support for access control lists +options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +#options MD_ROOT # MD is a potential root device +options NFSCL # New Network Filesystem Client +#options NFSD # New Network Filesystem Server +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL +options MSDOSFS # MSDOS Filesystem +options CD9660 # ISO 9660 Filesystem +#options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # TMP Memory Filesystem +options GEOM_PART_GPT # GUID Partition Tables. +options GEOM_LABEL # Provides labelization +#options COMPAT_FREEBSD5 # Compatible with FreeBSD5 +#options COMPAT_FREEBSD6 # Compatible with FreeBSD6 +#options COMPAT_FREEBSD7 # Compatible with FreeBSD7 +options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI +options KTRACE # ktrace(1) support +options SYSVSHM # SYSV-style shared memory +options SYSVMSG # SYSV-style message queues +options SYSVSEM # SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options INCLUDE_CONFIG_FILE # Include this file in kernel +options VFP # vfp/neon + +# required for netbooting +#options BOOTP +#options BOOTP_COMPAT +#options BOOTP_NFSROOT +#options BOOTP_NFSV3 +#options BOOTP_WIRED_TO=ue0 + +#options ROOTDEVNAME=\"ufs:ada0s2a\" + + +# kernel/memory size reduction +#options MUTEX_NOINLINE +#options NO_FFS_SNAPSHOT +#options NO_SWAPPING +#options NO_SYSCTL_DESCR +#options RWLOCK_NOINLINE + +# Debugging support. Always need this: +options KDB # Enable kernel debugger support. +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic. +# For full debugger support use this instead: +options DDB # Support DDB. +#options GDB # Support remote GDB. +#options DEADLKRES # Enable the deadlock resolver +#options INVARIANTS # Enable calls of extra sanity checking +#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +#options WITNESS # Enable checks to detect deadlocks and cycles + +# The `bpf' device enables the Berkeley Packet Filter. +# Be aware of the administrative consequences of enabling this! +# Note that 'bpf' is required for DHCP. +device bpf # Berkeley packet filter + +# Pseudo devices. +device loop # Network loopback +device random # Entropy device +device ether # Ethernet support +#device vlan # 802.1Q VLAN support +#device tun # Packet tunnel. +device md # Memory "disks" +#device gif # IPv6 and IPv4 tunneling +#device faith # IPv6-to-IPv4 relaying (translation) +#device firmware # firmware assist module + +# Ethernet +device ffec # Freescale Fast Ethernet Controller +device miibus # Standard mii bus + +# Serial (COM) ports +device uart # Multi-uart driver +options ALT_BREAK_TO_DEBUGGER + +#device ata +#device atapci # Only for helper functions +#device imxata +#options ATA_STATIC_ID # Static device numbering + +device iomux # IO Multiplexor + +device gpio +device gpioled + +device fsliic +device iic +device iicbus + +# SCSI peripherals +device scbus # SCSI bus (required for SCSI) +device da # Direct Access (disks) +device cd # CD +device pass # Passthrough device (direct SCSI access) + +# USB support +#options USB_DEBUG # enable debug msgs +device ehci # OHCI USB interface +device usb # USB Bus (required) +device umass # Disks/Mass storage - Requires scbus and da +#device uhid # "Human Interface Devices" +#device ukbd # Allow keyboard like HIDs to control console +#device ums + +# USB Ethernet, requires miibus +#device miibus +#device aue # ADMtek USB Ethernet +#device axe # ASIX Electronics USB Ethernet +#device cdce # Generic USB over Ethernet +#device cue # CATC USB Ethernet +#device kue # Kawasaki LSI USB Ethernet +#device rue # RealTek RTL8150 USB Ethernet +#device udav # Davicom DM9601E USB + +# USB Wireless +#device rum # Ralink Technology RT2501USB wireless NICs + +# Watchdog timer. +# WARNING: can't be disabled!!! +device imxwdt # Watchdog + +# Wireless NIC cards +device wlan # 802.11 support +device wlan_wep # 802.11 WEP support +device wlan_ccmp # 802.11 CCMP support +device wlan_tkip # 802.11 TKIP support +device wlan_amrr # AMRR transmit rate control algorithm + +# Flattened Device Tree +options FDT +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=imx53-qsb.dts + +# NOTE: serial console will be disabled if syscons enabled +# Uncomment following lines for framebuffer/syscons support +#device sc +#device kbdmux +#options SC_DFLT_FONT # compile font in +#makeoptions SC_DFLT_FONT=cp437 + Added: head/sys/boot/fdt/dts/imx53-qsb.dts ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/boot/fdt/dts/imx53-qsb.dts Sun Oct 20 21:21:07 2013 (r256809) @@ -0,0 +1,126 @@ +/* + * Copyright (c) 2012 The FreeBSD Foundation + * Copyright (c) 2013 Rui Paulo + * All rights reserved. + * + * This software was developed by Semihalf under sponsorship from + * the FreeBSD Foundation. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Freescale i.MX53 Quick Start Board + * + * $FreeBSD$ + */ + +/dts-v1/; +/include/ "imx53x.dtsi" + +/ { + model = "Freescale i.MX53 Quick Start Board"; + compatible = "fsl,imx53-qsb", "fsl,imx53"; + + memory { + /* RAM 512M */ + reg = <0x70000000 0x20000000>; + }; + + localbus@18000000 { + ipu3@18000000 { + status = "okay"; + }; + }; + + soc@50000000 { + aips@50000000 { + spba@50000000 { + esdhc@50004000 { + clock-frequency = <216000000>; + status = "okay"; + }; + esdhc@50008000 { + clock-frequency = <216000000>; + status = "okay"; + }; + SSI2: ssi@50014000 { + status = "okay"; + }; + }; + timer@53fa0000 { + status = "okay"; + }; + + /* UART1, console */ + console: serial@53fbc000 { + status = "okay"; + clock-frequency = <0>; /* won't load w/o this */ + }; + + clock@53fd4000 { + status = "okay"; + }; + gpio@53f84000 { + status = "okay"; + }; + gpio@53f88000 { + status = "okay"; + }; + gpio@53f8c000 { + status = "okay"; + }; + gpio@53f90000 { + status = "okay"; + }; + wdog@53f98000 { + status = "okay"; + }; + }; + aips@60000000 { + ethernet@63fec000 { + status = "okay"; + phy-mode = "rmii"; + } + i2c@63fc4000 { + status = "okay"; + }; + i2c@63fc8000 { + status = "okay"; + }; + audmux@63fd4000 { + status = "okay"; + }; + ide@63fe0000 { + status = "okay"; + }; + }; + }; + + aliases { + SSI2 = &SSI2; + }; + + chosen { + bootargs = "-v"; + stdin = &console; + stdout = &console; + }; +}; _______________________________________________ svn-src-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
