On Fri, Dec 30, 2011 at 5:58 AM, Ulrich Spoerlein <u...@freebsd.org> wrote:
> Author: uqs
> Date: Fri Dec 30 10:58:14 2011
> New Revision: 228990
> URL: http://svn.freebsd.org/changeset/base/228990
>
> Log:
> Spelling fixes for usr.sbin/
>
> Modified: head/usr.sbin/bluetooth/sdpd/server.c
> ==============================================================================
> --- head/usr.sbin/bluetooth/sdpd/server.c Fri Dec 30 10:45:00 2011
> (r228989)
> +++ head/usr.sbin/bluetooth/sdpd/server.c Fri Dec 30 10:58:14 2011
> (r228990)
> @@ -334,7 +334,7 @@ server_accept_client(server_p srv, int32
> * The minimum L2CAP MTU is 43 bytes. That means we need
> * 65536 / 43 = ~1524 chunks to transfer maximum packet
> * size with minimum MTU. The "rsp_cs" field in fd_idx_t
> - * is 11 bit wide that gives us upto 2048 chunks.
> + * is 11 bit wide that gives us up to 2048 chunks.
Should be "11 bits", no?
> */
>
> if (omtu < NG_L2CAP_MTU_MINIMUM) {
>
> Modified: head/usr.sbin/bsnmpd/modules/snmp_wlan/BEGEMOT-WIRELESS-MIB.txt
> ==============================================================================
> --- head/usr.sbin/bsnmpd/modules/snmp_wlan/BEGEMOT-WIRELESS-MIB.txt Fri
> Dec 30 10:45:00 2011 (r228989)
> +++ head/usr.sbin/bsnmpd/modules/snmp_wlan/BEGEMOT-WIRELESS-MIB.txt Fri
> Dec 30 10:58:14 2011 (r228990)
> @@ -82,8 +82,8 @@ WlanMgmtReasonCode ::= TEXTUAL-CONVENTIO
> associationLeave(8),
> associationNotAuthenticated(9),
> -- XXX: TODO - FIXME
> - dissasocPwrcapBad(10),
> - dissasocSuperchanBad(11),
> + disassocPwrcapBad(10),
> + disassocSuperchanBad(11),
This file looks like it might be intended to be machine-readable -- I
would worry about changing it without test/review.
Perhaps this spelling "error" is even the reason for the XXX comment above.
> ieInvalid(13),
> micFailure(14),
> fourWayHandshakeTimeout(15),
> @@ -579,10 +579,10 @@ wlanIfaceCountryCode OBJECT-TYPE
> interface is operating include all environments in the specified
> country.
>
> - 2. an ASCII 'O' character, if the country's regulastions are for
> + 2. an ASCII 'O' character, if the country's regulations are for
> Outdoor environment only.
>
> - 3. an ASCII 'I' character, if the country's regulastions are for
> + 3. an ASCII 'I' character, if the country's regulations are for
> Indoor environment only."
> ::= { wlanIfaceConfigEntry 2 }
>
> @@ -634,7 +634,7 @@ wlanIfaceFastFrames OBJECT-TYPE
> DESCRIPTION
> "The value of this object controls whether use of Atheros Fast
> Frames is enabled when when communicating with another Fast
> - Frames-capable station. The value is only meaningfull for
> + Frames-capable station. The value is only meaningful for
> interfaces that support Atheros Fast Frames."
> ::= { wlanIfaceConfigEntry 7 }
>
> @@ -645,7 +645,7 @@ wlanIfaceDturbo OBJECT-TYPE
> DESCRIPTION
> "The value of this object controls whether use of Atheros Dynamic
> Turbo mode is enabled when when communicating with another Dynamic
> - Turbo-capable station. The value is only meaningfull for interfaces
> + Turbo-capable station. The value is only meaningful for interfaces
> that support Atheros Dynamic Turbo mode."
> ::= { wlanIfaceConfigEntry 8 }
>
> @@ -731,7 +731,7 @@ wlanIfaceBeaconMissedThreshold OBJECT-TY
> MAX-ACCESS read-write
> STATUS current
> DESCRIPTION
> - "The value of this object specifies the number of consequtive missed
> + "The value of this object specifies the number of consecutive missed
> beacons before an interface operating in station mode will attempt
> to search for a new access point."
> DEFVAL { 7 }
> @@ -788,7 +788,7 @@ wlanIfaceDynamicWds OBJECT-TYPE
> STATUS current
> DESCRIPTION
> "The value of this object specifies whether Dynamic WDS (DWDS)
> - support is enabled. The value is only meaningfull for interfaces
> + support is enabled. The value is only meaningful for interfaces
> that support Dynamic WDS."
> ::= { wlanIfaceConfigEntry 21 }
>
> @@ -798,7 +798,7 @@ wlanIfacePowerSave OBJECT-TYPE
> STATUS current
> DESCRIPTION
> "The value of this object specifies whether powersave operation
> - is enabled. The value is only meaningfull for interfaces that
> + is enabled. The value is only meaningful for interfaces that
> support powersave operation."
> ::= { wlanIfaceConfigEntry 22 }
>
> @@ -809,7 +809,7 @@ wlanIfaceApBridge OBJECT-TYPE
> DESCRIPTION
> "The value of this object specifies whether packets between
> wireless clients will be passed directly by an interface
> - operating in host ap mode. Disabling it may be usefull in
> + operating in host ap mode. Disabling it may be useful in
> situations when traffic between wireless clients needs to be
> processed with packet filtering."
> DEFVAL { true }
> @@ -1308,7 +1308,7 @@ wlanIfaceChannelFrequency OBJECT-TYPE
> MAX-ACCESS read-only
> STATUS current
> DESCRIPTION
> - "The channel frequency setting in Mhz."
> + "The channel frequency setting in MHz."
> ::= { wlanIfaceChannelEntry 5 }
>
> wlanIfaceChannelMaxRegPower OBJECT-TYPE
> @@ -2741,7 +2741,7 @@ wlanStatsDwdsMcastDiscard OBJECT-TYPE
> MAX-ACCESS read-only
> STATUS current
> DESCRIPTION
> - "The number of multicast over DWDS frames discared by this interface."
> + "The number of multicast over DWDS frames discarded by this
> interface."
> ::= { wlanIfaceStatisticsEntry 98 }
>
> wlanStatsHTAssocRejectNoHT OBJECT-TYPE
> @@ -2759,7 +2759,7 @@ wlanStatsHTAssocDowngrade OBJECT-TYPE
> MAX-ACCESS read-only
> STATUS current
> DESCRIPTION
> - "The number of times HT was dissallowed for an association on
> + "The number of times HT was disallowed for an association on
> this interface due to WEP or TKIP requested."
> ::= { wlanIfaceStatisticsEntry 100 }
>
> @@ -2769,7 +2769,7 @@ wlanStatsHTAssocRateMismatch OBJECT-TYPE
> MAX-ACCESS read-only
> STATUS current
> DESCRIPTION
> - "The number of times rate mismatch occured furing HT rate set
> + "The number of times rate mismatch occurred during HT rate set
> handling on this interface."
> ::= { wlanIfaceStatisticsEntry 101 }
>
> @@ -2787,7 +2787,7 @@ wlanStatsAMPDUMoved OBJECT-TYPE
> MAX-ACCESS read-only
> STATUS current
> DESCRIPTION
> - "The number of time A-MPDU MSDU moved window occured for this
> + "The number of time A-MPDU MSDU moved window occurred for this
> interface."
> ::= { wlanIfaceStatisticsEntry 103 }
>
> @@ -2807,7 +2807,7 @@ wlanStatsADDBANoRequest OBJECT-TYPE
> MAX-ACCESS read-only
> STATUS current
> DESCRIPTION
> - "The number of received ADDBA responces frames that were discarded
> + "The number of received ADDBA responses frames that were discarded
> by this interface due to no pending ADDBA."
> ::= { wlanIfaceStatisticsEntry 105 }
>
> @@ -2817,7 +2817,7 @@ wlanStatsADDBABadToken OBJECT-TYPE
> MAX-ACCESS read-only
> STATUS current
> DESCRIPTION
> - "The number of received ADDBA responce frames that were discarded
> + "The number of received ADDBA response frames that were discarded
> by this interface since ADDBA response caused dialogtoken mismatch."
> ::= { wlanIfaceStatisticsEntry 106 }
>
> @@ -2827,7 +2827,7 @@ wlanStatsADDBABadPolicy OBJECT-TYPE
> MAX-ACCESS read-only
> STATUS current
> DESCRIPTION
> - "The number of received ADDBA responce frames that were discarded
> + "The number of received ADDBA response frames that were discarded
> by this interface since ADDBA response caused policy mismatch."
> ::= { wlanIfaceStatisticsEntry 107 }
>
> @@ -2877,7 +2877,7 @@ wlanLastDissasocReason OBJECT-TYPE
> MAX-ACCESS read-only
> STATUS current
> DESCRIPTION
> - "The last received dissasociate reason on this interface."
> + "The last received disassociate reason on this interface."
> ::= { wlanIfaceStatisticsEntry 113 }
>
> wlanLastAuthFailReason OBJECT-TYPE
> @@ -2942,7 +2942,7 @@ wlanStatsAMPDURexmtFailed OBJECT-TYPE
> MAX-ACCESS read-only
> STATUS current
> DESCRIPTION
> - "The number of A-MPDU frames for which retransmition failed on
> + "The number of A-MPDU frames for which retransmission failed on
> this interface."
> ::= { wlanIfaceStatisticsEntry 120 }
>
> @@ -3696,7 +3696,7 @@ wlanMeshDroppedMisaligned OBJECT-TYPE
> STATUS current
> DESCRIPTION
> "The number of frames that were dropped by this interface due to
> - bad alighment."
> + bad alignment."
> ::= { wlanMeshStatsEntry 11 }
>
> -- ---------------------------------------------------------- --
>
> Modified: head/usr.sbin/bsnmpd/modules/snmp_wlan/wlan_tree.def
> ==============================================================================
> --- head/usr.sbin/bsnmpd/modules/snmp_wlan/wlan_tree.def Fri Dec 30
> 10:45:00 2011 (r228989)
> +++ head/usr.sbin/bsnmpd/modules/snmp_wlan/wlan_tree.def Fri Dec 30
> 10:58:14 2011 (r228990)
> @@ -75,8 +75,8 @@ typedef WlanMgmtReasonCode ENUM (
> 7 notAssociated
> 8 associationLeave
> 9 associationNotAuthenticated
> - 10 dissasocPwrcapBad
> - 11 dissasocSuperchanBad
> + 10 disassocPwrcapBad
> + 11 disassocSuperchanBad
Hmm, but the same mis-spellings are also changed here (and presumably
elsewhere), so maybe it is less risky.
> 13 ieInvalid
> 14 micFailure
> 15 fourWayHandshakeTimeout
>
> Modified: head/usr.sbin/cron/doc/CHANGES
> ==============================================================================
> --- head/usr.sbin/cron/doc/CHANGES Fri Dec 30 10:45:00 2011
> (r228989)
> +++ head/usr.sbin/cron/doc/CHANGES Fri Dec 30 10:58:14 2011
> (r228990)
> @@ -1,3 +1,6 @@
> +$FreeBSD$
> +--------
> +
> Vixie Cron Changes from V2 to V3
> Paul Vixie
> 29-Dec-1993
> @@ -20,7 +23,7 @@ be reread whenever it changes.
>
> I also added a "-e" option to crontab(1). Nine people also sent me diffs
> to add this option, but I had already implemented it on my own. I actually
> -released an interrim version (V2.2, I think) for limited testing, and got a
> +released an interim version (V2.2, I think) for limited testing, and got a
Should we really be in the business of modifying Vixie's changelog?
> chance to fix a bad security bug in the "-e" option thanks to XXX.
>
> The daemon used to be extraordinarily sloppy in its use of file descriptors.
> @@ -57,7 +60,7 @@ which explains why a lot of other people
> syslog even when they configured it that way :-). Steve Simmons told me
> first, though, so he gets the point.
>
> -An interrim version of the daemon tried to "stat" every file before
> +An interim version of the daemon tried to "stat" every file before
> executing it; this turned out to be a horribly bad idea since finding the
> name of a file from a shell command is a hard job (that's why we have
> shells, right?) I removed this bogus code. Dave Burgess gets the point.
>
> Modified: head/usr.sbin/newsyslog/newsyslog.c
> ==============================================================================
> --- head/usr.sbin/newsyslog/newsyslog.c Fri Dec 30 10:45:00 2011
> (r228989)
> +++ head/usr.sbin/newsyslog/newsyslog.c Fri Dec 30 10:58:14 2011
> (r228990)
> @@ -1597,7 +1597,7 @@ delete_oldest_timelog(const struct conf_
> }
>
> /*
> - * Generate a log filename, when using clasic filenames.
> + * Generate a log filename, when using classic filenames.
> */
> static void
> gen_clasiclog_fname(char *fname, size_t fname_sz, const char *archive_dir,
> @@ -1612,7 +1612,7 @@ gen_clasiclog_fname(char *fname, size_t
> }
>
> /*
> - * Delete a rotated logfiles, when using clasic filenames.
> + * Delete a rotated logfiles, when using classic filenames.
"a logfiles" is inconsistent. Without looking up the implementation,
I'm going to guess that "a rotated logfile" is correct.
> */
> static void
> delete_clasiclog(const char *archive_dir, const char *namepart, int numlog_c)
>
> Modified: head/usr.sbin/ntp/doc/ntp.conf.5
> ==============================================================================
> --- head/usr.sbin/ntp/doc/ntp.conf.5 Fri Dec 30 10:45:00 2011
> (r228989)
> +++ head/usr.sbin/ntp/doc/ntp.conf.5 Fri Dec 30 10:58:14 2011
> (r228990)
> @@ -783,7 +783,7 @@ The remaining files are necessary only f
> Autokey protocol.
> .Pp
> Certificates imported from OpenSSL or public certificate
> -authorities have certian limitations.
>
> *** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
Hmm, that's unfortunate.
Pulling out a svn client, it looks like:
usr.sbin/pkg_install/lib/plist.c changes a misspelled form to the
still-misspelled "occurrance" (not occurrence)
Thanks for doing this cleanup along with the encoding cleanup!
-Ben Kaduk
_______________________________________________
svn-src-all@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
