Author: ray Date: Thu Jul 14 11:09:37 2011 New Revision: 224008 URL: http://svn.freebsd.org/changeset/base/224008
Log: Revert it back. Too many changes for one commit. Approved by: adrian (mentor) Modified: head/sys/mips/conf/RT305X head/sys/mips/conf/RT305X.hints Modified: head/sys/mips/conf/RT305X ============================================================================== --- head/sys/mips/conf/RT305X Thu Jul 14 10:31:38 2011 (r224007) +++ head/sys/mips/conf/RT305X Thu Jul 14 11:09:37 2011 (r224008) @@ -24,34 +24,42 @@ makeoptions MIPS_LITTLE_ENDIAN=defined makeoptions KERNLOADADDR=0x80001000 # Don't build any modules yet. -makeoptions MODULES_OVERRIDE="if_bridge bridgestp md ipfw dummynet libalias geom/geom_label zlib" +makeoptions MODULES_OVERRIDE="wlan_xauth wlan_wep wlan_tkip wlan_acl wlan_amrr wlan_ccmp wlan_rssadapt random if_bridge bridgestp msdosfs md ipfw dummynet libalias geom/geom_label ufs usb/uplcom usb/u3g usb/umodem usb/umass usb/ucom cam zlib" makeoptions RT3052F include "../rt305x/std.rt305x" hints "RT305X.hints" #Default places to look for devices. -# Debugging for use in -current #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols -#options DEADLKRES #Enable the deadlock resolver -#options INVARIANTS #Enable calls of extra sanity checking -#options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS -#options WITNESS #Enable checks to detect deadlocks and cycles -#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed -#options DIAGNOSTIC -#options DEBUG_LOCKS -#options DEBUG_VFS_LOCKS + +# Debugging for use in -current +#options DEADLKRES #Enable the deadlock resolver +#options INVARIANTS #Enable calls of extra sanity checking +#options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS +#options WITNESS #Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed +#options DIAGNOSTIC +#options DEBUG_LOCKS +#options DEBUG_VFS_LOCKS #options GDB -options DDB +options DDB options KDB options SCHED_ULE #options SCHED_4BSD #4BSD scheduler #options COMPAT_43 options INET #InterNETworking +options NFSCL #Network Filesystem Client +options NFS_ROOT #NFS usable as /, requires NFSCL options PSEUDOFS #Pseudo-filesystem framework #options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions +options BOOTP +#options BOOTP_NFSROOT +options BOOTP_NFSV3 +options BOOTP_WIRED_TO=rt0 +options BOOTP_COMPAT options CD9660 # ISO 9660 Filesystem options ROOTDEVNAME=\"cd9660:/dev/map/rootfs.uncompress\" options TMPFS # TMP Memory Filesystem @@ -60,15 +68,6 @@ options TMPFS # TMP Memory Filesystem #options SOFTUPDATES #Enable FFS soft updates support #options UFS_ACL #Support for access control lists #options UFS_DIRHASH #Improve performance on big directories - -# BOOTP/NFS boot -#options BOOTP -#options BOOTP_NFSROOT -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=rt0 -#options BOOTP_COMPAT -#options NFSCL #Network Filesystem Client -#options NFS_ROOT #NFS usable as /, requires NFSCL #options ROOTDEVNAME=\"nfs:10.0.0.1:/mnt/bsd\" # Options for making kernel less hangry @@ -90,46 +89,35 @@ options NO_SWAPPING options ZERO_COPY_SOCKETS options MROUTING # Multicast routing options IPFIREWALL_DEFAULT_TO_ACCEPT -options SCSI_DELAY=1000 # Delay (in ms) before probing SCSI - -device rt -device ether -# RT3050F, RT3052F have only attached switch, so no need to mii/miibus +device random +device loop +# RT3050F, RT3052F have only pseudo PHYs +#device mii +#device miibus device pty # Pseudo-ttys (telnet etc) +device ether device bpf # Berkeley packet filter device vlan #device lagg #device if_bridge -device tun # Packet tunnel. -device random -device loop - -# Chip have two UARTs - UART and UART Light device uart nodevice uart_ns8250 +device tun # Packet tunnel. + +device wlan -# Wireless support -# Work in progress -#device ral -#device wlan -# GPIO support device gpio device gpioled -# CFI flash support device cfi # Detect Flash memmory device cfid -# Read U-Boot environment from flash device nvram2env -# USB support -# Partial support. Not included yet. +device usb #device dotg # DWC like USB OTG Controller driver -#options USB_DEBUG -#device usb #device u3g #device umodem #device uplcom @@ -137,4 +125,10 @@ device nvram2env #device da #device pass #device scbus +options SCSI_DELAY=1000 # Delay (in ms) before probing SCSI + +#options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order +#options USB_DEBUG +#options USB_REQ_DEBUG + Modified: head/sys/mips/conf/RT305X.hints ============================================================================== --- head/sys/mips/conf/RT305X.hints Thu Jul 14 10:31:38 2011 (r224007) +++ head/sys/mips/conf/RT305X.hints Thu Jul 14 11:09:37 2011 (r224008) @@ -4,90 +4,87 @@ hint.obio.0.at="nexus0" hint.obio.0.maddr=0x10000000 hint.obio.0.msize=0x10000000 -# on-board Ralink Frame Engine -hint.rt.0.at="nexus0" -hint.rt.0.maddr=0x10100000 -hint.rt.0.msize=0x10000 -hint.rt.0.irq=3 - -# UART Light -hint.uart.1.flags="0x30" - -# Lines below is Board specific -# D-Link DIR-620 +hint.nvram.0.sig=0xe5e60a74 hint.nvram.0.base=0x1f030000 hint.nvram.0.maxsize=0x2000 -hint.nvram.0.flags=9 # 1 = No check, 2 = Format U-Boot +hint.nvram.0.flags=3 # 1 = No check, 2 = Format Generic +hint.nvram.1.sig=0x5a045e94 hint.nvram.1.base=0x1f032000 hint.nvram.1.maxsize=0x4000 -hint.nvram.1.flags=9 # 1 = No check, 2 = Format U-Boot - -# Configure SYSCTL_GPIOMODE to pass FUART pins to GPIO -# original: -# hint.rt305x_sysctl.0.gpiomode=0x000283 -# required: -hint.rt305x_sysctl.0.gpiomode=0x00029f +hint.nvram.1.flags=3 # 1 = No check, 2 = Format Generic -# gpio +# on-board Ralink Frame Engine +#hint.rt.0.at="nexus0" +#hint.rt.0.maddr=0x12000000 +#hint.rt.0.msize=0x200000 +#hint.rt.0.irq=9 +hint.rt.0.macaddr="00:18:e7:d5:83:90" + +# on-board Ralink 2872 802.11n core +hint.rt2860.0.at="nexus0" +hint.rt2860.0.maddr=0x10180000 +hint.rt2860.0.msize=0x40000 +hint.rt2860.0.irq=4 + +# uart0 +#hint.uart.0.at="obio0" +#hint.uart.0.maddr=0x10000C00 +#hint.uart.0.msize=0x100 +#hint.uart.0.irq=12 +#hint.uart.0.flags="0x30" + +# uart1 +#hint.uart.1.at="obio0" +#hint.uart.1.maddr=0x10000500 +#hint.uart.1.msize=0x100 +#hint.uart.1.irq=5 +#hint.uart.1.flags="0x30" -# Buttons -# GPIO10 - Reset BTN IN PU II INT -hint.gpioreset.0.at="gpiobus0" -hint.gpioreset.0.pins="0x0400" -hint.gpioreset.0.name="reset" -hint.gpioreset.0.flags="0x04a1" # (INPUT|PULLUP|INVIN|REPORT) -## GPIO0 - WPS BTN IN PU II INT +# gpio +# GPIO0 - WPS BTN IN II IO hint.gpiobutton.0.at="gpiobus0" hint.gpiobutton.0.pins="0x01" hint.gpiobutton.0.name="wps" -hint.gpiobutton.0.flags="0x04a1" # (INPUT|PULLUP|INVIN|REPORT) +hint.gpiobutton.0.flags="0x0581" -# LEDs -# Power Yellow 8 -# Power Green 9 -# WAN Green 12 -# WAN Yellow 14 -# WPS Orange 11 -# WPS Blue 13 -#GPIO8 STATUS ? -hint.gpioled.0.at="gpiobus0" -hint.gpioled.0.pins="0x0100" -hint.gpioled.0.name="status_yellow" -hint.gpioled.0.flags="0x0102" # (OUTPUT|INVOUT) +# GPIO7 - MODE SW AP IN II IO +hint.gpiobutton.1.at="gpiobus0" +hint.gpiobutton.1.pins="0x80" +hint.gpiobutton.1.name="mode_ap" +hint.gpiobutton.1.flags="0x0581" -#GPIO9 STATUS +# GPIO8 - ST LEDRED OUT /* 2pin BiDir RED/BLUE LED */ +# GPIO9 - ST LEDBLUE OUT +hint.gpioled.0.at="gpiobus0" +hint.gpioled.0.pins="0x100" +hint.gpioled.0.name="status_red" +hint.gpioled.0.flags="0x0002" hint.gpioled.1.at="gpiobus0" -hint.gpioled.1.pins="0x0200" +hint.gpioled.1.pins="0x200" +#hint.gpioled.1.name="status_blue" hint.gpioled.1.name="status" -hint.gpioled.1.flags="0x0102" # (OUTPUT|INVOUT) +hint.gpioled.1.flags="0x0002" + +# GPIO10 - RST BTN IN II IO +hint.gpiobutton.2.at="gpiobus0" +hint.gpiobutton.2.pins="0x400" +hint.gpiobutton.2.name="reset" +hint.gpiobutton.2.flags="0x0581" + +# GPIO11 - MODE SW CL IN II IO +hint.gpiobutton.3.at="gpiobus0" +hint.gpiobutton.3.pins="0x800" +hint.gpiobutton.3.name="mode_wlan_client" +hint.gpiobutton.3.flags="0x0581" -#GPIO11 WPS Orange +# GPIO14 - WPS LED OUT II IO hint.gpioled.2.at="gpiobus0" -hint.gpioled.2.pins="0x0800" -hint.gpioled.2.name="wps_orange" -hint.gpioled.2.flags="0x0002" # (OUTPUT|INVOUT) - -#GPIO12 WAN Green -hint.gpioled.3.at="gpiobus0" -hint.gpioled.3.pins="0x1000" -hint.gpioled.3.name="wan" -hint.gpioled.3.flags="0x0102" # (OUTPUT|INVOUT) - -#GPIO13 WPS Blue -hint.gpioled.4.at="gpiobus0" -hint.gpioled.4.pins="0x2000" -hint.gpioled.4.name="wps" -hint.gpioled.4.flags="0x0002" # (OUTPUT|INVOUT) - -#GPIO14 WAN Yellow -hint.gpioled.5.at="gpiobus0" -hint.gpioled.5.pins="0x4000" -hint.gpioled.5.name="wan_yellow" -hint.gpioled.5.flags="0x0102" # (OUTPUT|INVOUT) +hint.gpioled.2.pins="0x4000" +hint.gpioled.2.name="wps" +hint.gpioled.2.flags="0x0182" + -hint.cfi.0.width=2 -hint.cfi.0.shift=2 #0x00000000-0x00030000 : "Bootloader" #0x00030000-0x00040000 : "Factory" @@ -105,30 +102,35 @@ hint.map.0.readonly=1 hint.map.1.at="cfid0" hint.map.1.start=0x00030000 hint.map.1.end=0x00040000 -hint.map.1.name="linuxconfig" +hint.map.1.name="factory" hint.map.2.at="cfid0" hint.map.2.start=0x00040000 -hint.map.2.end=0x00050000 -hint.map.2.name="factory" +hint.map.2.end=0x00800000 +hint.map.2.name="upgrade" hint.map.3.at="cfid0" -hint.map.3.start=0x00050000 -hint.map.3.end=0x007e0000 -hint.map.3.name="upgrade" +hint.map.3.start=0x00040000 +hint.map.3.end=0x00050000 +hint.map.3.name="config" hint.map.4.at="cfid0" -hint.map.4.name="kernel" -hint.map.4.start=0x00050000 -hint.map.4.end="search:0x00100000:0x10000:.!/bin/sh" +hint.map.4.start=0x00000000 +hint.map.4.end=0x00000000 +hint.map.4.name="language" hint.map.5.at="cfid0" -hint.map.5.name="rootfs" -hint.map.5.start="search:0x00100000:0x10000:.!/bin/sh" -hint.map.5.end=0x007e0000 +hint.map.5.start=0x00050000 +hint.map.5.end=0x00150000 +hint.map.5.name="kernel" hint.map.6.at="cfid0" -hint.map.6.start=0x007e0000 +hint.map.6.start=0x00150000 hint.map.6.end=0x00800000 -hint.map.6.name="config" +hint.map.6.name="rootfs" + + +hint.rt.0.phymask=0x1f +hint.rt.0.media=100 +hint.rt.0.fduplex=1 _______________________________________________ svn-src-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
