On Tue, Jun 22, 2010 at 12:12:44AM +0300, Alexander Motin wrote: > Kostik Belousov wrote: > > Witness patch worked for me, and I can boot multiuser in the qemu-hosted > > system with hint.hpet.0.clock=0. Does the same hint should work for > > amd64 ? > > Yes. > > > The issue is no longer critical for me due to hint, below is the dmesg > > you asked for. Thanks. > > It is not verbose.
Fair enough.
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #200: Mon Jun 21 23:56:04 EEST 2010
r...@pooma.home:/usr/home/kostik/work/build/bsd/DEV/obj-i386/i386/usr/home/kostik/work/build/bsd/DEV/src/sys/QEMU
i386
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0af1000.
Preloaded elf module "/boot/kernel/if_ed.ko" at 0xc0af1158.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc0af1204.
Preloaded elf module "/boot/kernel/random.ko" at 0xc0af12b0.
Preloaded elf module "/boot/kernel/ufs.ko" at 0xc0af135c.
Preloaded elf module "/boot/kernel/ata.ko" at 0xc0af1404.
Preloaded elf module "/boot/kernel/atapci.ko" at 0xc0af14ac.
Preloaded elf module "/boot/kernel/atadisk.ko" at 0xc0af1558.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0af1604.
Calibrating TSC clock ... TSC clock: 2786270228 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (2786.27-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Family = 6 Model = 3 Stepping = 3
Features=0x781abfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,CMOV,PAT,MMX,FXSR,SSE,SSE2>
Features2=0x80000001<SSE3,<b31>>
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size
1st-level data cache: 32 KB, 8-way set associative, 64 byte line size
real memory = 67108864 (64 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x0000000003e8dfff, 52854784 bytes (12904 pages)
avail memory = 55808000 (53 MB)
Table 'FACP' at 0x3ff0038
Table 'APIC' at 0x3ff0948
APIC: Found table at 0x3ff0948
MP Configuration Table version 1.4 found at 0xc00fba00
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
Event timer "LAPIC" frequency 0 Hz quality 500
ACPI APIC Table: <QEMU QEMUAPIC>
x86bios: IVT 0x000000-0x0004ff at 0xc0000000
x86bios: SSEG 0x010000-0x01ffff at 0xc126b000
x86bios: EBDA 0x09f000-0x09ffff at 0xc009f000
x86bios: ROM 0x0a0000-0x0effff at 0xc00a0000
APIC: CPU 0 has ACPI ID 0
bios32: Found BIOS32 Service Directory header at 0xc00fb3e0
bios32: Entry = 0xfb3f0 (c00fb3f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb430
Other BIOS signatures found:
ULE: setup cpu 0
ACPI: RSDP 0xfbbf0 00014 (v0 QEMU )
ACPI: RSDT 0x3ff0000 00034 (v1 QEMU QEMURSDT 00000001 QEMU 00000001)
ACPI: FACP 0x3ff0038 00074 (v1 QEMU QEMUFACP 00000001 QEMU 00000001)
ACPI: DSDT 0x3ff0100 0080D (v1 BXPC BXDSDT 00000001 INTL 20061109)
ACPI: FACS 0x3ff00c0 00040
ACPI: APIC 0x3ff0948 0004A (v1 QEMU QEMUAPIC 00000001 QEMU 00000001)
ACPI: SSDT 0x3ff090d 00037 (v1 QEMU QEMUSSDT 00000001 QEMU 00000001)
ACPI: HPET 0x3ff0998 00038 (v1 QEMU QEMUHPET 00000001 QEMU 00000001)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050011 LDR: 0x00000000 DFR: 0xf0000000
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
cmci: 0x00000000
random: <entropy source, Software, Yarrow>
mem: <memory>
io: <I/O>
null: <null device, zero device>
npx0: INT 16 interface
acpi0: <QEMU QEMURSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc10b5000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PX13.P13C -> bus 0 dev 1 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.ISA_.P40C -> bus 0 dev 1 func 0
ACPI timer: 0/79 0/21 0/91 0/20 0/19 0/18 0/20 0/18 0/19 0/193 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12
Validation 0 9 N 0 3 4 5 6 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12
Validation 0 9 N 0 3 4 5 6 7 9 10 11 12
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
hpet0: vendor 0x8086, rev 0x1, 100000000Hz 64bit, 3 timers, legacy route
hpet0: t0: irqs 0x00000004 (0), 64bit, periodic
hpet0: t1: irqs 0x00000004 (0), 64bit, periodic
hpet0: t2: irqs 0x00000004 (0), 64bit, periodic
Timecounter "HPET" frequency 100000000 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.1.INTA at func 3: 9
pci_link0: BIOS IRQ 9 does not match initial IRQ 11
ACPI: Found matching pin for 0.3.INTA at func 0: 11
ACPI: Found matching pin for 0.4.INTA at func 0: 9
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x1237, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7000, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7010, revid=0x00
domain=0, bus=0, slot=1, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type I/O Port, range 32, base 0xc000, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x03
domain=0, bus=0, slot=1, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
pcib0: matched entry for 0.1.INTA (src \\_SB_.LNKA:0)
pcib0: slot 1 INTA routed to irq 9 via \\_SB_.LNKA
found-> vendor=0x1013, dev=0x00b8, revid=0x00
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Prefetchable Memory, range 32, base 0xf0000000, size 25,
enabled
map[14]: type Memory, range 32, base 0xf2000000, size 12, enabled
found-> vendor=0x10ec, dev=0x8029, revid=0x00
domain=0, bus=0, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type I/O Port, range 32, base 0xc100, size 8, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKC:0)
ioapic0: Changing trigger for pin 11 to level
ioapic0: Changing polarity for pin 11 to low
pcib0: slot 3 INTA routed to irq 11 via \\_SB_.LNKC
found-> vendor=0x1af4, dev=0x1002, revid=0x00
domain=0, bus=0, slot=4, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[10]: type I/O Port, range 32, base 0xc200, size 5, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.LNKD:0)
pcib0: slot 4 INTA routed to irq 9 via \\_SB_.LNKD
Correcting Natoma config for non-SMP
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 49
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata1: stat1=0x00 err=0x00 lsb=0xff msb=0xff
ata1: reset tp2 stat0=50 stat1=00 devices=0x1
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 50
ata1: [MPSAFE]
ata1: [ITHREAD]
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem
0xf0000000-0xf1ffffff,0xf2000000-0xf2000fff at device 2.0 on pci0
ed0: <RealTek 8029> port 0xc100-0xc1ff irq 11 at device 3.0 on pci0
ed0: ed_stop_hw RST never set
ed0: bpf attached
ed0: Ethernet address: 52:54:00:12:34:56
ed0: type RTL8029 (16 bit)
ioapic0: routing intpin 11 (ISA IRQ 11) to lapic 0 vector 51
ed0: [MPSAFE]
ed0: [ITHREAD]
pci0: <memory, RAM> at device 4.0 (no driver attached)
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 52
atrtc0: [MPSAFE]
atrtc0: [FILTER]
atrtc0: registered as a time-of-day clock (resolution 1000000us)
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0061
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 53
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0061
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 54
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
isa_probe_children: probing non-PnP devices
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 2786270228 Hz quality 800
Starting kernel event timers: LAPIC @ 100Hz, RTC @ 128Hz
lapic: Divisor 2, Frequency 500045678 Hz
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0: Identifying devices: 00000003
ata0: New devices: 00000003
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting UDMA33
ad0: 512MB <QEMU HARDDISK 0.11.1> at ata0-master UDMA33
ad0: 1048576 sectors [1040C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad1: setting UDMA33
GEOM: ad0s1: geometry does not match label (255h,63s != 16h,63s).
ad1: 512MB <QEMU HARDDISK 0.11.1> at ata0-slave UDMA33
ad1: 1048576 sectors [1040C/16H/63S] 16 sectors/interrupt 1 depth queue
ata1: Identifying devices: 00000001
ata1: New devices: 00000001
GEOM: new disk ad1
GEOM: ad1s1: geometry does not match label (255h,63s != 16h,63s).
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad2: setting UDMA33
ad2: 512MB <QEMU HARDDISK 0.11.1> at ata1-master UDMA33
ad2: 1048576 sectors [1040C/16H/63S] 16 sectors/interrupt 1 depth queue
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
GEOM: new disk ad2
Trying to mount root from ufs:/dev/ad0s1a
ct_to_ts([2010-06-21 21:18:21]) = 1277155101.000000000
start_init: trying /sbin/init
t_delta 15.fdb4d9e67e3e66c0 too short
pgpDmMD4cqgj7.pgp
Description: PGP signature
