Author: mav
Date: Sun Sep 29 02:56:23 2019
New Revision: 352862
URL: https://svnweb.freebsd.org/changeset/base/352862
Log:
MFC r352369: Relax TX draining in ns8250_bus_transmit().
Since TX interrupt is generated when THRE is set, wait for TEMT set means
wait for full character transmission time. At low speeds that may take
awhile, burning CPU time while holding sc_hwmtx lock, also congested.
This is partial revert of r317659.
Modified:
stable/11/sys/dev/uart/uart_dev_ns8250.c
Directory Properties:
stable/11/ (props changed)
Modified: stable/11/sys/dev/uart/uart_dev_ns8250.c
==============================================================================
--- stable/11/sys/dev/uart/uart_dev_ns8250.c Sun Sep 29 02:55:57 2019
(r352861)
+++ stable/11/sys/dev/uart/uart_dev_ns8250.c Sun Sep 29 02:56:23 2019
(r352862)
@@ -988,13 +988,8 @@ ns8250_bus_transmit(struct uart_softc *sc)
bas = &sc->sc_bas;
uart_lock(sc->sc_hwmtx);
- if (sc->sc_txdatasz > 1) {
- if ((uart_getreg(bas, REG_LSR) & LSR_TEMT) == 0)
- ns8250_drain(bas, UART_DRAIN_TRANSMITTER);
- } else {
- while ((uart_getreg(bas, REG_LSR) & LSR_THRE) == 0)
- DELAY(4);
- }
+ while ((uart_getreg(bas, REG_LSR) & LSR_THRE) == 0)
+ DELAY(4);
for (i = 0; i < sc->sc_txdatasz; i++) {
uart_setreg(bas, REG_DATA, sc->sc_txbuf[i]);
uart_barrier(bas);
_______________________________________________
svn-src-all@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
