On Tue, 29 Dec 2009 19:47:34 +0000 (UTC), Rui Paulo <rpa...@freebsd.org> wrote:
> Author: rpaulo
> Date: Tue Dec 29 19:47:34 2009
> New Revision: 201209
> URL: http://svn.freebsd.org/changeset/base/201209
>
> Log:
> iwn(4) update. Notable changes:
> * new firmware
> * untested support for 1000 and 6000 series
> * bgscan support
> * remove unnecessary RXON changes
> * allow setting of country/regdomain by enforcing channel flags read
> from the EEPROM
> * suspend/resume fixes
> * RF kill switch fixes
> * LED adjustments
> * several bus_dma*() related fixes
> * addressed some LORs
> * many other bug fixes
First of all thanks for all the updates :-)
The new firmware seems to have a few problems when it tries to
initialize my laptop's iwn0 interface. The laptop is a Thinkpad X61s,
with an Intel 4965AGN wireless adapter:
# pciconf -lv
i...@pci0:3:0:0: class=0x028000 card=0x11108086 chip=0x42308086 rev=0x61
hdr=0x00
vendor = 'Intel Corporation'
device = 'Intel Wireless WiFi Link 4965AGN (Intel 4965AGN)'
class = network
When wpa_supplicant is trying to associate with the new firmware in
place I see in /var/log/messages:
: Dec 30 13:10:43 kobe kernel: wlan0: Ethernet address: 00:1d:e0:6d:b8:27
: Dec 30 13:10:43 kobe wpa_supplicant[2928]: Failed to initiate AP scan.
: Dec 30 13:10:44 kobe kernel: firmware error log:
: Dec 30 13:10:44 kobe kernel: error type = "SYSASSERT" (0x00000005)
: Dec 30 13:10:44 kobe kernel: program counter = 0x0000147C
: Dec 30 13:10:44 kobe kernel: source line = 0x0000058B
: Dec 30 13:10:44 kobe kernel: error data = 0x0000058B00000000
: Dec 30 13:10:44 kobe kernel: branch link = 0x0000145A00001492
: Dec 30 13:10:44 kobe kernel: interrupt link = 0x000006DE00000000
: Dec 30 13:10:44 kobe kernel: time = 7310
: Dec 30 13:10:44 kobe kernel: driver status:
: Dec 30 13:10:44 kobe kernel: tx ring 0: qid=0 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 1: qid=1 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 2: qid=2 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 3: qid=3 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 4: qid=4 cur=5 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 5: qid=5 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 6: qid=6 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 7: qid=7 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 8: qid=8 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 9: qid=9 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 10: qid=10 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 11: qid=11 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 12: qid=12 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 13: qid=13 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 14: qid=14 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: tx ring 15: qid=15 cur=0 queued=0
: Dec 30 13:10:44 kobe kernel: rx ring: cur=6
: Dec 30 13:10:45 kobe kernel: iwn0: iwn_config: could not set TX power
: Dec 30 13:10:45 kobe kernel: iwn0: iwn_init_locked: could not configure
device, error 35
: Dec 30 13:10:53 kobe wpa_supplicant[2928]: Failed to initiate AP scan.
Going back to my last kernel from Dec 27 works fine (I am sending this
message over a wlan0 interface with that version of the firmware).
_______________________________________________
svn-src-all@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
