Author: jhibbits
Date: Tue Apr  4 00:43:09 2017
New Revision: 316478
URL: https://svnweb.freebsd.org/changeset/base/316478

Log:
  Use a common tsec_mii_wait() function to busy wait for status changes.
  
  The status indicators are not set immediatly after a command.  Discard
  the first value.
  
  Unlock the PHY mutex after a timeout in tsec_init_locked().
  
  Tested on the P1020RDB.
  
  Submitted by: Sebastian Huber <sebastian_DOT_huber_AT_embedded-brains_DOT_de>

Modified:
  head/sys/dev/tsec/if_tsec.c

Modified: head/sys/dev/tsec/if_tsec.c
==============================================================================
--- head/sys/dev/tsec/if_tsec.c Mon Apr  3 23:16:51 2017        (r316477)
+++ head/sys/dev/tsec/if_tsec.c Tue Apr  4 00:43:09 2017        (r316478)
@@ -357,13 +357,33 @@ tsec_init(void *xsc)
        TSEC_GLOBAL_UNLOCK(sc);
 }
 
+static int
+tsec_mii_wait(struct tsec_softc *sc, uint32_t flags)
+{
+       int timeout;
+
+       /*
+        * The status indicators are not set immediatly after a command.
+        * Discard the first value.
+        */
+       TSEC_PHY_READ(sc, TSEC_REG_MIIMIND);
+
+       timeout = TSEC_READ_RETRY;
+       while ((TSEC_PHY_READ(sc, TSEC_REG_MIIMIND) & flags) && --timeout)
+           DELAY(TSEC_READ_DELAY);
+
+       return (timeout == 0);
+}
+
+
 static void
 tsec_init_locked(struct tsec_softc *sc)
 {
        struct tsec_desc *tx_desc = sc->tsec_tx_vaddr;
        struct tsec_desc *rx_desc = sc->tsec_rx_vaddr;
        struct ifnet *ifp = sc->tsec_ifp;
-       uint32_t timeout, val, i;
+       uint32_t val, i;
+       int timeout;
 
        if (ifp->if_drv_flags & IFF_DRV_RUNNING)
                return;
@@ -422,15 +442,13 @@ tsec_init_locked(struct tsec_softc *sc)
        TSEC_PHY_WRITE(sc, TSEC_REG_MIIMCFG, TSEC_MIIMCFG_CLKDIV28);
 
        /* Step 8: Read MII Mgmt indicator register and check for Busy = 0 */
-       timeout = TSEC_READ_RETRY;
-       while (--timeout && (TSEC_PHY_READ(sc, TSEC_REG_MIIMIND) &
-           TSEC_MIIMIND_BUSY))
-               DELAY(TSEC_READ_DELAY);
-       if (timeout == 0) {
+       timeout = tsec_mii_wait(sc, TSEC_MIIMIND_BUSY);
+
+       TSEC_PHY_UNLOCK(sc);
+       if (timeout) {
                if_printf(ifp, "tsec_init_locked(): Mgmt busy timeout\n");
                return;
        }
-       TSEC_PHY_UNLOCK(sc);
 
        /* Step 9: Setup the MII Mgmt */
        mii_mediachg(sc->tsec_mii);
@@ -1570,7 +1588,7 @@ int
 tsec_miibus_readreg(device_t dev, int phy, int reg)
 {
        struct tsec_softc *sc;
-       uint32_t timeout;
+       int timeout;
        int rv;
 
        sc = device_get_softc(dev);
@@ -1580,17 +1598,13 @@ tsec_miibus_readreg(device_t dev, int ph
        TSEC_PHY_WRITE(sc, TSEC_REG_MIIMCOM, 0);
        TSEC_PHY_WRITE(sc, TSEC_REG_MIIMCOM, TSEC_MIIMCOM_READCYCLE);
 
-       timeout = TSEC_READ_RETRY;
-       while (--timeout && TSEC_PHY_READ(sc, TSEC_REG_MIIMIND) &
-           (TSEC_MIIMIND_NOTVALID | TSEC_MIIMIND_BUSY))
-               DELAY(TSEC_READ_DELAY);
+       timeout = tsec_mii_wait(sc, TSEC_MIIMIND_NOTVALID | TSEC_MIIMIND_BUSY);
+       rv = TSEC_PHY_READ(sc, TSEC_REG_MIIMSTAT);
+       TSEC_PHY_UNLOCK();
 
        if (timeout == 0)
                device_printf(dev, "Timeout while reading from PHY!\n");
 
-       rv = TSEC_PHY_READ(sc, TSEC_REG_MIIMSTAT);
-       TSEC_PHY_UNLOCK();
-
        return (rv);
 }
 
@@ -1598,18 +1612,14 @@ int
 tsec_miibus_writereg(device_t dev, int phy, int reg, int value)
 {
        struct tsec_softc *sc;
-       uint32_t timeout;
+       int timeout;
 
        sc = device_get_softc(dev);
 
        TSEC_PHY_LOCK();
        TSEC_PHY_WRITE(sc, TSEC_REG_MIIMADD, (phy << 8) | reg);
        TSEC_PHY_WRITE(sc, TSEC_REG_MIIMCON, value);
-
-       timeout = TSEC_READ_RETRY;
-       while (--timeout && (TSEC_READ(sc, TSEC_REG_MIIMIND) &
-           TSEC_MIIMIND_BUSY))
-               DELAY(TSEC_READ_DELAY);
+       timeout = tsec_mii_wait(sc, TSEC_MIIMIND_BUSY);
        TSEC_PHY_UNLOCK();
 
        if (timeout == 0)
_______________________________________________
svn-src-all@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"

Reply via email to