Author: ganbold
Date: Sat Mar 25 10:39:24 2017
New Revision: 315931
URL: https://svnweb.freebsd.org/changeset/base/315931

Log:
  Fix and add comments to match selected frequency sample.
  Add debug printfs when bootverbose is used.
  No functional changes.

Modified:
  head/sys/arm/allwinner/aw_cir.c

Modified: head/sys/arm/allwinner/aw_cir.c
==============================================================================
--- head/sys/arm/allwinner/aw_cir.c     Sat Mar 25 05:41:34 2017        
(r315930)
+++ head/sys/arm/allwinner/aw_cir.c     Sat Mar 25 10:39:24 2017        
(r315931)
@@ -89,7 +89,12 @@ __FBSDID("$FreeBSD$");
 
 /* IR Sample Configure Reg */
 #define        AW_IR_CIR                       0x34
-/* Filter Threshold = 8 * 21.3 = ~128us < 200us */
+
+/*
+ * Frequency sample: 23437.5Hz (Cycle: 42.7us)
+ * Pulse of NEC Remote > 560us
+ */
+/* Filter Threshold = 8 * 42.7 = ~341us < 500us */
 #define         AW_IR_RXFILT_VAL               (((8) & 0x3f) << 2)
 /* Idle Threshold = (2 + 1) * 128 * 42.7 = ~16.4ms > 9ms */
 #define         AW_IR_RXIDLE_VAL               (((2) & 0xff) << 8)
@@ -317,12 +322,17 @@ aw_ir_intr(void *arg)
 
        /* Read RX interrupt status */
        val = READ(sc, AW_IR_RXSTA);
+       if (bootverbose)
+               device_printf(sc->dev, "RX interrupt status: %x\n", val);
 
        /* Clean all pending interrupt statuses */
        WRITE(sc, AW_IR_RXSTA, val | AW_IR_RXSTA_CLEARALL);
 
        /* When Rx FIFO Data available or Packet end */
        if (val & (AW_IR_RXINT_RAI_EN | AW_IR_RXINT_RPEI_EN)) {
+               if (bootverbose)
+                       device_printf(sc->dev,
+                           "RX FIFO Data available or Packet end\n");
                /* Get available message count in RX FIFO */
                dcnt  = AW_IR_RXSTA_COUNTER(val);
                /* Read FIFO */
_______________________________________________
svn-src-all@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"

Reply via email to