Author: adrian
Date: Sun Jan  8 04:25:41 2017
New Revision: 311662
URL: https://svnweb.freebsd.org/changeset/base/311662

Log:
  [net80211] Add initial VHT support routines.
  
  This is a skeleton set based on ieee80211_ht.c.  It implements some IE
  parsing, some basic unfinished negotiation, and channel promotion/demotion.
  
  However, by itself it's not enough to do VHT - notably, the actual
  channel promotion for STA mode at least is done in ieee80211_ht.c as
  part of htinfo_update_chw().  I was .. quite amused when I found that
  out.
  
  I'm checking this in so others can see progress rather than one huge
  commit when VHT is "done" (which will likely be quite a while.)

Added:
  head/sys/net80211/ieee80211_vht.c   (contents, props changed)
  head/sys/net80211/ieee80211_vht.h   (contents, props changed)

Added: head/sys/net80211/ieee80211_vht.c
==============================================================================
--- /dev/null   00:00:00 1970   (empty, because file is newly added)
+++ head/sys/net80211/ieee80211_vht.c   Sun Jan  8 04:25:41 2017        
(r311662)
@@ -0,0 +1,469 @@
+/*-
+ * Copyright (c) 2017 Adrian Chadd <adr...@freebsd.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+#ifdef __FreeBSD__
+__FBSDID("$FreeBSD$");
+#endif
+
+/*
+ * IEEE 802.11ac-2013 protocol support.
+ */
+
+#include "opt_inet.h"
+#include "opt_wlan.h"
+
+#include <sys/param.h>
+#include <sys/kernel.h>
+#include <sys/malloc.h>
+#include <sys/systm.h> 
+#include <sys/endian.h>
+ 
+#include <sys/socket.h>
+
+#include <net/if.h>
+#include <net/if_var.h>
+#include <net/if_media.h>
+#include <net/ethernet.h>
+
+#include <net80211/ieee80211_var.h>
+#include <net80211/ieee80211_action.h>
+#include <net80211/ieee80211_input.h>
+#include <net80211/ieee80211_vht.h>
+
+/* define here, used throughout file */
+#define        MS(_v, _f)      (((_v) & _f) >> _f##_S)
+#define        SM(_v, _f)      (((_v) << _f##_S) & _f)
+
+#define        ADDSHORT(frm, v) do {                   \
+       frm[0] = (v) & 0xff;                    \
+       frm[1] = (v) >> 8;                      \
+       frm += 2;                               \
+} while (0)
+#define        ADDWORD(frm, v) do {                    \
+       frm[0] = (v) & 0xff;                    \
+       frm[1] = ((v) >> 8) & 0xff;             \
+       frm[2] = ((v) >> 16) & 0xff;            \
+       frm[3] = ((v) >> 24) & 0xff;            \
+       frm += 4;                               \
+} while (0)
+
+/*
+ * XXX TODO: handle WLAN_ACTION_VHT_OPMODE_NOTIF
+ *
+ * Look at mac80211/vht.c:ieee80211_vht_handle_opmode() for further details.
+ */
+
+static void
+ieee80211_vht_init(void)
+{
+}
+
+SYSINIT(wlan_vht, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_vht_init, NULL);
+
+void
+ieee80211_vht_attach(struct ieee80211com *ic)
+{
+}
+
+void
+ieee80211_vht_detach(struct ieee80211com *ic)
+{
+}
+
+void
+ieee80211_vht_vattach(struct ieee80211vap *vap)
+{
+       struct ieee80211com *ic = vap->iv_ic;
+
+       if (! IEEE80211_CONF_VHT(ic))
+               return;
+
+       vap->iv_vhtcaps = ic->ic_vhtcaps;
+       vap->iv_vhtextcaps = ic->ic_vhtextcaps;
+
+       /* XXX assume VHT80 support; should really check vhtcaps */
+       vap->iv_flags_vht =
+           IEEE80211_FVHT_VHT
+           | IEEE80211_FVHT_USEVHT40
+           | IEEE80211_FVHT_USEVHT80;
+       /* XXX TODO: enable VHT80+80, VHT160 capabilities */
+
+       memcpy(&vap->iv_vht_mcsinfo, &ic->ic_vht_mcsinfo,
+           sizeof(struct ieee80211_vht_mcs_info));
+}
+
+void
+ieee80211_vht_vdetach(struct ieee80211vap *vap)
+{
+}
+
+#if 0
+static void
+vht_announce(struct ieee80211com *ic, enum ieee80211_phymode mode)
+{
+}
+#endif
+
+static int
+vht_mcs_to_num(int m)
+{
+
+       switch (m) {
+       case IEEE80211_VHT_MCS_SUPPORT_0_7:
+               return (7);
+       case IEEE80211_VHT_MCS_SUPPORT_0_8:
+               return (8);
+       case IEEE80211_VHT_MCS_SUPPORT_0_9:
+               return (9);
+       default:
+               return (0);
+       }
+}
+
+void
+ieee80211_vht_announce(struct ieee80211com *ic)
+{
+       int i, tx, rx;
+
+       if (! IEEE80211_CONF_VHT(ic))
+               return;
+
+       /* Channel width */
+       ic_printf(ic, "[VHT] Channel Widths: 20MHz, 40MHz, 80MHz");
+       if (ic->ic_vhtcaps & IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
+               printf(" 80+80MHz");
+       if (ic->ic_vhtcaps & IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_160MHZ)
+               printf(" 160MHz");
+       printf("\n");
+
+       /* Features */
+       ic_printf(ic, "[VHT] Features: %b\n", ic->ic_vhtcaps,
+           IEEE80211_VHTCAP_BITS);
+
+       /* For now, just 5GHz VHT.  Worry about 2GHz VHT later */
+       for (i = 0; i < 7; i++) {
+               /* Each stream is 2 bits */
+               tx = (ic->ic_vht_mcsinfo.tx_mcs_map >> (2*i)) & 0x3;
+               rx = (ic->ic_vht_mcsinfo.rx_mcs_map >> (2*i)) & 0x3;
+               if (tx == 3 && rx == 3)
+                       continue;
+               ic_printf(ic, "[VHT] NSS %d: TX MCS 0..%d, RX MCS 0..%d\n",
+                   i + 1,
+                   vht_mcs_to_num(tx),
+                   vht_mcs_to_num(rx));
+       }
+}
+
+void
+ieee80211_vht_node_init(struct ieee80211_node *ni)
+{
+
+       IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni,
+           "%s: called", __func__);
+       ni->ni_flags |= IEEE80211_NODE_VHT;
+}
+
+void
+ieee80211_vht_node_cleanup(struct ieee80211_node *ni)
+{
+
+       IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni,
+           "%s: called", __func__);
+       ni->ni_flags &= ~IEEE80211_NODE_VHT;
+       ni->ni_vhtcap = 0;
+       bzero(&ni->ni_vht_mcsinfo, sizeof(struct ieee80211_vht_mcs_info));
+}
+
+/*
+ * Parse an 802.11ac VHT operation IE.
+ */
+void
+ieee80211_parse_vhtopmode(struct ieee80211_node *ni, const uint8_t *ie)
+{
+       /* vht operation */
+       ni->ni_vht_chanwidth = ie[2];
+       ni->ni_vht_chan1 = ie[3];
+       ni->ni_vht_chan2 = ie[4];
+       ni->ni_vht_basicmcs = le16dec(ie + 5);
+
+#if 0
+       printf("%s: chan1=%d, chan2=%d, chanwidth=%d, basicmcs=0x%04x\n",
+           __func__,
+           ni->ni_vht_chan1,
+           ni->ni_vht_chan2,
+           ni->ni_vht_chanwidth,
+           ni->ni_vht_basicmcs);
+#endif
+}
+
+/*
+ * Parse an 802.11ac VHT capability IE.
+ */
+void
+ieee80211_parse_vhtcap(struct ieee80211_node *ni, const uint8_t *ie)
+{
+
+       /* vht capability */
+       ni->ni_vhtcap = le32dec(ie + 2);
+
+       /* suppmcs */
+       ni->ni_vht_mcsinfo.rx_mcs_map = le16dec(ie + 6);
+       ni->ni_vht_mcsinfo.rx_highest = le16dec(ie + 8);
+       ni->ni_vht_mcsinfo.tx_mcs_map = le16dec(ie + 10);
+       ni->ni_vht_mcsinfo.tx_highest = le16dec(ie + 12);
+}
+
+int
+ieee80211_vht_updateparams(struct ieee80211_node *ni,
+    const uint8_t *vhtcap_ie,
+    const uint8_t *vhtop_ie)
+{
+
+       //printf("%s: called\n", __func__);
+
+       ieee80211_parse_vhtcap(ni, vhtcap_ie);
+       ieee80211_parse_vhtopmode(ni, vhtop_ie);
+       return (0);
+}
+
+void
+ieee80211_setup_vht_rates(struct ieee80211_node *ni,
+    const uint8_t *vhtcap_ie,
+    const uint8_t *vhtop_ie)
+{
+
+       //printf("%s: called\n", __func__);
+       /* XXX TODO */
+}
+
+void
+ieee80211_vht_timeout(struct ieee80211com *ic)
+{
+}
+
+void
+ieee80211_vht_node_join(struct ieee80211_node *ni)
+{
+
+       IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni,
+           "%s: called", __func__);
+}
+
+void
+ieee80211_vht_node_leave(struct ieee80211_node *ni)
+{
+
+       IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni,
+           "%s: called", __func__);
+}
+
+uint8_t *
+ieee80211_add_vhtcap(uint8_t *frm, struct ieee80211_node *ni)
+{
+       uint32_t cap;
+
+       memset(frm, '\0', sizeof(struct ieee80211_ie_vhtcap));
+
+       frm[0] = IEEE80211_ELEMID_VHT_CAP;
+       frm[1] = sizeof(struct ieee80211_ie_vhtcap) - 2;
+       frm += 2;
+
+       /*
+        * For now, don't do any configuration.
+        * Just populate the node configuration.
+        * We can worry about making it configurable later.
+        */
+
+       cap = ni->ni_vhtcap;
+
+       /*
+        * XXX TODO: any capability changes required by
+        * configuration.
+        */
+
+       /* 32-bit VHT capability */
+       ADDWORD(frm, cap);
+
+       /* suppmcs */
+       ADDSHORT(frm, ni->ni_vht_mcsinfo.rx_mcs_map);
+       ADDSHORT(frm, ni->ni_vht_mcsinfo.rx_highest);
+       ADDSHORT(frm, ni->ni_vht_mcsinfo.tx_mcs_map);
+       ADDSHORT(frm, ni->ni_vht_mcsinfo.tx_highest);
+
+       return (frm);
+}
+
+static uint8_t
+ieee80211_vht_get_chwidth_ie(struct ieee80211_channel *c)
+{
+
+       /*
+        * XXX TODO: look at the node configuration as
+        * well?
+        */
+
+       if (IEEE80211_IS_CHAN_VHT160(c)) {
+               return IEEE80211_VHT_CHANWIDTH_160MHZ;
+       }
+       if (IEEE80211_IS_CHAN_VHT80_80(c)) {
+               return IEEE80211_VHT_CHANWIDTH_80P80MHZ;
+       }
+       if (IEEE80211_IS_CHAN_VHT80(c)) {
+               return IEEE80211_VHT_CHANWIDTH_80MHZ;
+       }
+       if (IEEE80211_IS_CHAN_VHT40(c)) {
+               return IEEE80211_VHT_CHANWIDTH_USE_HT;
+       }
+       if (IEEE80211_IS_CHAN_VHT20(c)) {
+               return IEEE80211_VHT_CHANWIDTH_USE_HT;
+       }
+
+       /* We shouldn't get here */
+       printf("%s: called on a non-VHT channel (freq=%d, flags=0x%08x\n",
+           __func__,
+           (int) c->ic_freq,
+           c->ic_flags);
+       return IEEE80211_VHT_CHANWIDTH_USE_HT;
+}
+
+/*
+ * Note: this just uses the current channel information;
+ * it doesn't use the node info after parsing.
+ */
+uint8_t *
+ieee80211_add_vhtinfo(uint8_t *frm, struct ieee80211_node *ni)
+{
+       memset(frm, '\0', sizeof(struct ieee80211_ie_vht_operation));
+
+       frm[0] = IEEE80211_ELEMID_VHT_OPMODE;
+       frm[1] = sizeof(struct ieee80211_ie_vht_operation) - 2;
+       frm += 2;
+
+       /*
+        * XXX if it's a station, then see if we have a node
+        * channel or ANYC.  If it's ANYC then assume we're
+        * scanning, and announce our capabilities.
+        *
+        * This should set the "20/40/80/160MHz wide config";
+        * the 80/80 or 160MHz wide config is done in VHTCAP.
+        *
+        * Other modes - just limit it to the channel.
+        */
+
+       /* 8-bit chanwidth */
+       *frm++ = ieee80211_vht_get_chwidth_ie(ni->ni_chan);
+
+       /* 8-bit freq1 */
+       *frm++ = ni->ni_chan->ic_vht_ch_freq1;
+
+       /* 8-bit freq2 */
+       *frm++ = ni->ni_chan->ic_vht_ch_freq1;
+
+       /* 16-bit basic MCS set - just MCS0..7 for NSS=1 for now */
+       ADDSHORT(frm, 0xfffc);
+
+       return (frm);
+}
+
+void
+ieee80211_vht_update_cap(struct ieee80211_node *ni, const uint8_t *vhtcap_ie,
+    const uint8_t *vhtop_ie)
+{
+
+       ieee80211_parse_vhtcap(ni, vhtcap_ie);
+       ieee80211_parse_vhtopmode(ni, vhtop_ie);
+}
+
+static struct ieee80211_channel *
+findvhtchan(struct ieee80211com *ic, struct ieee80211_channel *c, int vhtflags)
+{
+
+       return (ieee80211_find_channel(ic, c->ic_freq,
+           (c->ic_flags & ~IEEE80211_CHAN_VHT) | vhtflags));
+}
+
+/*
+ * Handle channel promotion to VHT, similar to ieee80211_ht_adjust_channel().
+ */
+struct ieee80211_channel *
+ieee80211_vht_adjust_channel(struct ieee80211com *ic,
+    struct ieee80211_channel *chan, int flags)
+{
+       struct ieee80211_channel *c;
+
+       /* First case - handle channel demotion - if VHT isn't set */
+       if ((flags & IEEE80211_FVHT_VHT) == 0) {
+#if 0
+               printf("%s: demoting channel %d/0x%08x\n", __func__,
+                   chan->ic_ieee, chan->ic_flags);
+#endif
+               c = ieee80211_find_channel(ic, chan->ic_freq,
+                   chan->ic_flags & ~IEEE80211_CHAN_VHT);
+               if (c == NULL)
+                       c = chan;
+#if 0
+               printf("%s: .. to %d/0x%08x\n", __func__,
+                   c->ic_ieee, c->ic_flags);
+#endif
+               return (c);
+       }
+
+       /*
+        * We can upgrade to VHT - attempt to do so
+        *
+        * Note: we don't clear the HT flags, these are the hints
+        * for HT40U/HT40D when selecting VHT40 or larger channels.
+        */
+       /* Start with VHT80 */
+       c = NULL;
+       if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT160))
+               c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT80);
+
+       if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT80P80))
+               c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT80_80);
+
+       if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT80))
+               c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT80);
+
+       if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT40))
+               c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT40U);
+       if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT40))
+               c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT40D);
+       /*
+        * If we get here, VHT20 is always possible because we checked
+        * for IEEE80211_FVHT_VHT above.
+        */
+       if (c == NULL)
+               c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT20);
+
+       if (c != NULL)
+               chan = c;
+
+#if 0
+       printf("%s: selected %d/0x%08x\n", __func__, c->ic_ieee, c->ic_flags);
+#endif
+       return (chan);
+}

Added: head/sys/net80211/ieee80211_vht.h
==============================================================================
--- /dev/null   00:00:00 1970   (empty, because file is newly added)
+++ head/sys/net80211/ieee80211_vht.h   Sun Jan  8 04:25:41 2017        
(r311662)
@@ -0,0 +1,63 @@
+/*-
+ * Copyright (c) 2016 Adrian Chadd <adr...@freebsd.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+#ifndef _NET80211_IEEE80211_VHT_H_
+#define _NET80211_IEEE80211_VHT_H_
+
+void   ieee80211_vht_attach(struct ieee80211com *);
+void   ieee80211_vht_detach(struct ieee80211com *);
+void   ieee80211_vht_vattach(struct ieee80211vap *);
+void   ieee80211_vht_vdetach(struct ieee80211vap *);
+
+void   ieee80211_vht_announce(struct ieee80211com *);
+
+void   ieee80211_vht_node_init(struct ieee80211_node *);
+void   ieee80211_vht_node_cleanup(struct ieee80211_node *);
+
+void   ieee80211_parse_vhtopmode(struct ieee80211_node *, const uint8_t *);
+void   ieee80211_parse_vhtcap(struct ieee80211_node *, const uint8_t *);
+
+int    ieee80211_vht_updateparams(struct ieee80211_node *,
+           const uint8_t *, const uint8_t *);
+void   ieee80211_setup_vht_rates(struct ieee80211_node *,
+           const uint8_t *, const uint8_t *);
+
+void   ieee80211_vht_timeout(struct ieee80211com *ic);
+
+void   ieee80211_vht_node_join(struct ieee80211_node *ni);
+void   ieee80211_vht_node_leave(struct ieee80211_node *ni);
+
+uint8_t *      ieee80211_add_vhtcap(uint8_t *frm, struct ieee80211_node *);
+uint8_t *      ieee80211_add_vhtinfo(uint8_t *frm, struct ieee80211_node *);
+
+void   ieee80211_vht_update_cap(struct ieee80211_node *,
+           const uint8_t *, const uint8_t *);
+
+struct ieee80211_channel *
+       ieee80211_vht_adjust_channel(struct ieee80211com *,
+           struct ieee80211_channel *, int);
+
+#endif /* _NET80211_IEEE80211_VHT_H_ */
_______________________________________________
svn-src-all@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"

Reply via email to