Author: np
Date: Fri Dec 16 06:25:51 2016
New Revision: 310151
URL: https://svnweb.freebsd.org/changeset/base/310151
Log:
cxgbe(4): Changes to the default T6 firmware configuration file.
- Disable features that are not supported or not used on FreeBSD.
- Increase the RSS table slice per interface.
- Increase the share of the TCAM reserved for filtering.
MFH: 2 weeks
Sponsored by: Chelsio Communications
Modified:
head/sys/dev/cxgbe/firmware/t6fw_cfg.txt
Modified: head/sys/dev/cxgbe/firmware/t6fw_cfg.txt
==============================================================================
--- head/sys/dev/cxgbe/firmware/t6fw_cfg.txt Fri Dec 16 04:47:29 2016
(r310150)
+++ head/sys/dev/cxgbe/firmware/t6fw_cfg.txt Fri Dec 16 06:25:51 2016
(r310151)
@@ -1,63 +1,12 @@
-# Chelsio T6 Factory Default configuration file.
+# Firmware configuration file.
#
-# Copyright (C) 2014-2016 Chelsio Communications. All rights reserved.
-#
-# DO NOT MODIFY THIS FILE UNDER ANY CIRCUMSTANCES. MODIFICATION OF THIS FILE
-# WILL RESULT IN A NON-FUNCTIONAL ADAPTER AND MAY RESULT IN PHYSICAL DAMAGE
-# TO ADAPTERS.
-
-
-# This file provides the default, power-on configuration for 2-port T6-based
-# adapters shipped from the factory. These defaults are designed to address
-# the needs of the vast majority of Terminator customers. The basic idea is to
-# have a default configuration which allows a customer to plug a Terminator
-# adapter in and have it work regardless of OS, driver or application except in
-# the most unusual and/or demanding customer applications.
-#
-# Many of the Terminator resources which are described by this configuration
-# are finite. This requires balancing the configuration/operation needs of
-# device drivers across OSes and a large number of customer application.
-#
-# Some of the more important resources to allocate and their constaints are:
-# 1. Virtual Interfaces: 256.
-# 2. Ingress Queues with Free Lists: 1024.
-# 3. Egress Queues: 128K.
-# 4. MSI-X Vectors: 1088.
-# 5. Multi-Port Support (MPS) TCAM: 336 entries to support MAC destination
-# address matching on Ingress Packets.
-#
-# Some of the important OS/Driver resource needs are:
-# 6. Some OS Drivers will manage all resources through a single Physical
-# Function (currently PF4 but it could be any Physical Function).
-# 7. Some OS Drivers will manage different ports and functions (NIC,
-# storage, etc.) on different Physical Functions. For example, NIC
-# functions for ports 0-1 on PF0-1, FCoE on PF4, iSCSI on PF5, etc.
-#
-# Some of the customer application needs which need to be accommodated:
-# 8. Some customers will want to support large CPU count systems with
-# good scaling. Thus, we'll need to accommodate a number of
-# Ingress Queues and MSI-X Vectors to allow up to some number of CPUs
-# to be involved per port and per application function. For example,
-# in the case where all ports and application functions will be
-# managed via a single Unified PF and we want to accommodate scaling up
-# to 8 CPUs, we would want:
-#
-# 2 ports *
-# 3 application functions (NIC, FCoE, iSCSI) per port *
-# 16 Ingress Queue/MSI-X Vectors per application function
-#
-# for a total of 96 Ingress Queues and MSI-X Vectors on the Unified PF.
-# (Plus a few for Firmware Event Queues, etc.)
-#
-# 9. Some customers will want to use PCI-E SR-IOV Capability to allow Virtual
-# Machines to directly access T6 functionality via SR-IOV Virtual Functions
-# and "PCI Device Passthrough" -- this is especially true for the NIC
-# application functionality.
-#
-
+# Global limits (some are hardware limits, others are due to the firmware).
+# nvi = 128 virtual interfaces
+# niqflint = 1023 ingress queues with freelists and/or interrupts
+# nethctrl = 64K Ethernet or ctrl egress queues
+# neq = 64K egress queues of all kinds, including freelists
+# nexactf = 512 MPS TCAM entries, can oversubscribe.
-# Global configuration settings.
-#
[global]
rss_glb_config_mode = basicvirtual
rss_glb_config_options = tnlmapen,hashtoeplitz,tnlalllkp
@@ -65,75 +14,29 @@
# PL_TIMEOUT register
pl_timeout_value = 200 # the timeout value in units of us
- # The following Scatter Gather Engine (SGE) settings assume a 4KB Host
- # Page Size and a 64B L1 Cache Line Size. It programs the
- # EgrStatusPageSize and IngPadBoundary to 64B and the PktShift to 2.
- # If a Master PF Driver finds itself on a machine with different
- # parameters, then the Master PF Driver is responsible for initializing
- # these parameters to appropriate values.
- #
- # Notes:
- # 1. The Free List Buffer Sizes below are raw and the firmware will
- # round them up to the Ingress Padding Boundary.
- # 2. The SGE Timer Values below are expressed below in microseconds.
- # The firmware will convert these values to Core Clock Ticks when
- # it processes the configuration parameters.
- #
- reg[0x1008] = 0x40810/0x21c70 # SGE_CONTROL
- reg[0x100c] = 0x22222222 # SGE_HOST_PAGE_SIZE
- reg[0x10a0] = 0x01040810 # SGE_INGRESS_RX_THRESHOLD
- reg[0x1044] = 4096 # SGE_FL_BUFFER_SIZE0
- reg[0x1048] = 65536 # SGE_FL_BUFFER_SIZE1
- reg[0x104c] = 1536 # SGE_FL_BUFFER_SIZE2
- reg[0x1050] = 9024 # SGE_FL_BUFFER_SIZE3
- reg[0x1054] = 9216 # SGE_FL_BUFFER_SIZE4
- reg[0x1058] = 2048 # SGE_FL_BUFFER_SIZE5
- reg[0x105c] = 128 # SGE_FL_BUFFER_SIZE6
- reg[0x1060] = 8192 # SGE_FL_BUFFER_SIZE7
- reg[0x1064] = 16384 # SGE_FL_BUFFER_SIZE8
- reg[0x10a4] = 0xa000a000/0xf000f000 # SGE_DBFIFO_STATUS
- reg[0x10a8] = 0x402000/0x402000 # SGE_DOORBELL_CONTROL
- sge_timer_value = 5, 10, 20, 50, 100, 200 # SGE_TIMER_VALUE* in usecs
- reg[0x10c4] = 0x20000000/0x20000000 # GK_CONTROL, enable 5th thread
+ sge_timer_value = 1, 5, 10, 50, 100, 200 # SGE_TIMER_VALUE* in
usecs
- # enable TP_OUT_CONFIG.IPIDSPLITMODE
- reg[0x7d04] = 0x00010000/0x00010000
+ reg[0x10c4] = 0x20000000/0x20000000 # GK_CONTROL, enable 5th thread
reg[0x7dc0] = 0x0e2f8849 # TP_SHIFT_CNT
#Tick granularities in kbps
tsch_ticks = 100000, 10000, 1000, 10
- # TP_VLAN_PRI_MAP to select filter tuples and enable ServerSram
- # filter control: compact, fcoemask
- # server sram : srvrsram
- # filter tuples : fragmentation, mpshittype, macmatch, ethertype,
- # protocol, tos, vlan, vnic_id, port, fcoe
- # valid filterModes are described the Terminator 5 Data Book
- filterMode = fcoemask, srvrsram, fragmentation, mpshittype, protocol,
vlan, port, fcoe
-
- # filter tuples enforced in LE active region (equal to or subset of
filterMode)
+ filterMode = fragmentation, mpshittype, protocol, vlan, port, fcoe
filterMask = protocol, fcoe
- # Percentage of dynamic memory (in either the EDRAM or external MEM)
- # to use for TP RX payload
- tp_pmrx = 30
-
- # TP RX payload page size
+ tp_pmrx = 36, 512
tp_pmrx_pagesize = 64K
- # TP number of RX channels
- tp_nrxch = 0 # 0 (auto) = 1
-
- # Percentage of dynamic memory (in either the EDRAM or external MEM)
- # to use for TP TX payload
- tp_pmtx = 50
+ # TP number of RX channels (0 = auto)
+ tp_nrxch = 0
- # TP TX payload page size
+ tp_pmtx = 46, 512
tp_pmtx_pagesize = 64K
- # TP number of TX channels
- tp_ntxch = 0 # 0 (auto) = equal number of ports
+ # TP number of TX channels (0 = auto)
+ tp_ntxch = 0
# TP OFLD MTUs
tp_mtus = 88, 256, 512, 576, 808, 1024, 1280, 1488, 1500, 2002, 2048,
4096, 4352, 8192, 9000, 9600
@@ -150,6 +53,9 @@
# TP_PARA_REG0
reg[0x7d60] = 0x06000000/0x07000000 # set InitCWND to 6
+ # cluster, lan, or wan.
+ tp_tcptuning = lan
+
# LE_DB_CONFIG
reg[0x19c04] = 0x00000000/0x00440000 # LE Server SRAM disabled
# LE IPv4 compression disabled
@@ -179,301 +85,117 @@
# MC configuration
#mc_mode_brc[0] = 1 # mc0 - 1: enable BRC, 0: enable RBC
-# Some "definitions" to make the rest of this a bit more readable. We support
-# 4 ports, 3 functions (NIC, FCoE and iSCSI), scaling up to 8 "CPU Queue Sets"
-# per function per port ...
-#
-# NMSIX = 1088 # available MSI-X Vectors
-# NVI = 256 # available Virtual Interfaces
-# NMPSTCAM = 336 # MPS TCAM entries
-#
-# NPORTS = 2 # ports
-# NCPUS = 16 # CPUs we want to support scalably
-# NFUNCS = 3 # functions per port (NIC, FCoE, iSCSI)
-
-# Breakdown of Virtual Interface/Queue/Interrupt resources for the "Unified
-# PF" which many OS Drivers will use to manage most or all functions.
-#
-# Each Ingress Queue can use one MSI-X interrupt but some Ingress Queues can
-# use Forwarded Interrupt Ingress Queues. For these latter, an Ingress Queue
-# would be created and the Queue ID of a Forwarded Interrupt Ingress Queue
-# will be specified as the "Ingress Queue Asynchronous Destination Index."
-# Thus, the number of MSI-X Vectors assigned to the Unified PF will be less
-# than or equal to the number of Ingress Queues ...
-#
-# NVI_NIC = 4 # NIC access to NPORTS
-# NFLIQ_NIC = 32 # NIC Ingress Queues with Free Lists
-# NETHCTRL_NIC = 32 # NIC Ethernet Control/TX Queues
-# NEQ_NIC = 64 # NIC Egress Queues (FL, ETHCTRL/TX)
-# NMPSTCAM_NIC = 16 # NIC MPS TCAM Entries (NPORTS*4)
-# NMSIX_NIC = 32 # NIC MSI-X Interrupt Vectors (FLIQ)
-#
-# NVI_OFLD = 0 # Offload uses NIC function to access ports
-# NFLIQ_OFLD = 16 # Offload Ingress Queues with Free Lists
-# NETHCTRL_OFLD = 0 # Offload Ethernet Control/TX Queues
-# NEQ_OFLD = 16 # Offload Egress Queues (FL)
-# NMPSTCAM_OFLD = 0 # Offload MPS TCAM Entries (uses NIC's)
-# NMSIX_OFLD = 16 # Offload MSI-X Interrupt Vectors (FLIQ)
-#
-# NVI_RDMA = 0 # RDMA uses NIC function to access ports
-# NFLIQ_RDMA = 4 # RDMA Ingress Queues with Free Lists
-# NETHCTRL_RDMA = 0 # RDMA Ethernet Control/TX Queues
-# NEQ_RDMA = 4 # RDMA Egress Queues (FL)
-# NMPSTCAM_RDMA = 0 # RDMA MPS TCAM Entries (uses NIC's)
-# NMSIX_RDMA = 4 # RDMA MSI-X Interrupt Vectors (FLIQ)
-#
-# NEQ_WD = 128 # Wire Direct TX Queues and FLs
-# NETHCTRL_WD = 64 # Wire Direct TX Queues
-# NFLIQ_WD = 64 ` # Wire Direct Ingress Queues with Free
Lists
-#
-# NVI_ISCSI = 4 # ISCSI access to NPORTS
-# NFLIQ_ISCSI = 4 # ISCSI Ingress Queues with Free Lists
-# NETHCTRL_ISCSI = 0 # ISCSI Ethernet Control/TX Queues
-# NEQ_ISCSI = 4 # ISCSI Egress Queues (FL)
-# NMPSTCAM_ISCSI = 4 # ISCSI MPS TCAM Entries (NPORTS)
-# NMSIX_ISCSI = 4 # ISCSI MSI-X Interrupt Vectors (FLIQ)
-#
-# NVI_FCOE = 4 # FCOE access to NPORTS
-# NFLIQ_FCOE = 34 # FCOE Ingress Queues with Free Lists
-# NETHCTRL_FCOE = 32 # FCOE Ethernet Control/TX Queues
-# NEQ_FCOE = 66 # FCOE Egress Queues (FL)
-# NMPSTCAM_FCOE = 32 # FCOE MPS TCAM Entries (NPORTS)
-# NMSIX_FCOE = 34 # FCOE MSI-X Interrupt Vectors (FLIQ)
-
-# Two extra Ingress Queues per function for Firmware Events and Forwarded
-# Interrupts, and two extra interrupts per function for Firmware Events (or a
-# Forwarded Interrupt Queue) and General Interrupts per function.
-#
-# NFLIQ_EXTRA = 6 # "extra" Ingress Queues 2*NFUNCS (Firmware and
-# # Forwarded Interrupts
-# NMSIX_EXTRA = 6 # extra interrupts 2*NFUNCS (Firmware and
-# # General Interrupts
-
-# Microsoft HyperV resources. The HyperV Virtual Ingress Queues will have
-# their interrupts forwarded to another set of Forwarded Interrupt Queues.
-#
-# NVI_HYPERV = 16 # VMs we want to support
-# NVIIQ_HYPERV = 2 # Virtual Ingress Queues with Free Lists per VM
-# NFLIQ_HYPERV = 40 # VIQs + NCPUS Forwarded Interrupt Queues
-# NEQ_HYPERV = 32 # VIQs Free Lists
-# NMPSTCAM_HYPERV = 16 # MPS TCAM Entries (NVI_HYPERV)
-# NMSIX_HYPERV = 8 # NCPUS Forwarded Interrupt Queues
-
-# Adding all of the above Unified PF resource needs together: (NIC + OFLD +
-# RDMA + ISCSI + FCOE + EXTRA + HYPERV)
-#
-# NVI_UNIFIED = 28
-# NFLIQ_UNIFIED = 106
-# NETHCTRL_UNIFIED = 32
-# NEQ_UNIFIED = 124
-# NMPSTCAM_UNIFIED = 40
-#
-# The sum of all the MSI-X resources above is 74 MSI-X Vectors but we'll round
-# that up to 128 to make sure the Unified PF doesn't run out of resources.
-#
-# NMSIX_UNIFIED = 128
-#
-# The Storage PFs could need up to NPORTS*NCPUS + NMSIX_EXTRA MSI-X Vectors
-# which is 34 but they're probably safe with 32.
-#
-# NMSIX_STORAGE = 32
-
-# Note: The UnifiedPF is PF4 which doesn't have any Virtual Functions
-# associated with it. Thus, the MSI-X Vector allocations we give to the
-# UnifiedPF aren't inherited by any Virtual Functions. As a result we can
-# provision many more Virtual Functions than we can if the UnifiedPF were
-# one of PF0-3.
-#
-
-# All of the below PCI-E parameters are actually stored in various *_init.txt
-# files. We include them below essentially as comments.
-#
-# For PF0-3 we assign 8 vectors each for NIC Ingress Queues of the associated
-# ports 0-3.
-#
-# For PF4, the Unified PF, we give it an MSI-X Table Size as outlined above.
-#
-# For PF5-6 we assign enough MSI-X Vectors to support FCoE and iSCSI
-# storage applications across all four possible ports.
-#
-# Additionally, since the UnifiedPF isn't one of the per-port Physical
-# Functions, we give the UnifiedPF and the PF0-3 Physical Functions
-# different PCI Device IDs which will allow Unified and Per-Port Drivers
-# to directly select the type of Physical Function to which they wish to be
-# attached.
-#
-# Note that the actual values used for the PCI-E Intelectual Property will be
-# 1 less than those below since that's the way it "counts" things. For
-# readability, we use the number we actually mean ...
-#
-# PF0_INT = 8 # NCPUS
-# PF1_INT = 8 # NCPUS
-# PF0_3_INT = 32 # PF0_INT + PF1_INT + PF2_INT + PF3_INT
-#
-# PF4_INT = 128 # NMSIX_UNIFIED
-# PF5_INT = 32 # NMSIX_STORAGE
-# PF6_INT = 32 # NMSIX_STORAGE
-# PF7_INT = 0 # Nothing Assigned
-# PF4_7_INT = 192 # PF4_INT + PF5_INT + PF6_INT + PF7_INT
-#
-# PF0_7_INT = 224 # PF0_3_INT + PF4_7_INT
-#
-# With the above we can get 17 VFs/PF0-3 (limited by 336 MPS TCAM entries)
-# but we'll lower that to 16 to make our total 64 and a nice power of 2 ...
-#
-# NVF = 16
-
-
-# For those OSes which manage different ports on different PFs, we need
-# only enough resources to support a single port's NIC application functions
-# on PF0-3. The below assumes that we're only doing NIC with NCPUS "Queue
-# Sets" for ports 0-3. The FCoE and iSCSI functions for such OSes will be
-# managed on the "storage PFs" (see below).
-#
+# PFs 0-3. These get 8 MSI/8 MSI-X vectors each. VFs are supported by
+# these 4 PFs only.
[function "0"]
- nvf = 16 # NVF on this function
- wx_caps = all # write/execute permissions for all commands
- r_caps = all # read permissions for all commands
- nvi = 1 # 1 port
- niqflint = 8 # NCPUS "Queue Sets"
- nethctrl = 8 # NCPUS "Queue Sets"
- neq = 16 # niqflint + nethctrl Egress Queues
- nexactf = 8 # number of exact MPSTCAM MAC filters
- cmask = all # access to all channels
- pmask = 0x1 # access to only one port
-
+ nvf = 4
+ wx_caps = all
+ r_caps = all
+ nvi = 2
+ rssnvi = 2
+ niqflint = 4
+ nethctrl = 4
+ neq = 8
+ nexactf = 4
+ cmask = all
+ pmask = 0x1
[function "1"]
- nvf = 16 # NVF on this function
- wx_caps = all # write/execute permissions for all commands
- r_caps = all # read permissions for all commands
- nvi = 1 # 1 port
- niqflint = 8 # NCPUS "Queue Sets"
- nethctrl = 8 # NCPUS "Queue Sets"
- neq = 16 # niqflint + nethctrl Egress Queues
- nexactf = 8 # number of exact MPSTCAM MAC filters
- cmask = all # access to all channels
- pmask = 0x2 # access to only one port
+ nvf = 4
+ wx_caps = all
+ r_caps = all
+ nvi = 2
+ rssnvi = 2
+ niqflint = 4
+ nethctrl = 4
+ neq = 8
+ nexactf = 4
+ cmask = all
+ pmask = 0x2
[function "2"]
- nvf = 16 # NVF on this function
- wx_caps = all # write/execute permissions for all commands
- r_caps = all # read permissions for all commands
- nvi = 1 # 1 port
- niqflint = 8 # NCPUS "Queue Sets"
- nethctrl = 8 # NCPUS "Queue Sets"
- neq = 16 # niqflint + nethctrl Egress Queues
- nexactf = 8 # number of exact MPSTCAM MAC filters
- cmask = all # access to all channels
- pmask = 0x4 # access to only one port
+ nvf = 4
+ wx_caps = all
+ r_caps = all
+ nvi = 2
+ rssnvi = 2
+ niqflint = 4
+ nethctrl = 4
+ neq = 8
+ nexactf = 4
+ cmask = all
+ pmask = 0x4
[function "3"]
- nvf = 16 # NVF on this function
- wx_caps = all # write/execute permissions for all commands
- r_caps = all # read permissions for all commands
- nvi = 1 # 1 port
- niqflint = 8 # NCPUS "Queue Sets"
- nethctrl = 8 # NCPUS "Queue Sets"
- neq = 16 # niqflint + nethctrl Egress Queues
- nexactf = 8 # number of exact MPSTCAM MAC filters
- cmask = all # access to all channels
- pmask = 0x8 # access to only one port
-
-
-# Some OS Drivers manage all application functions for all ports via PF4.
-# Thus we need to provide a large number of resources here. For Egress
-# Queues we need to account for both TX Queues as well as Free List Queues
-# (because the host is responsible for producing Free List Buffers for the
-# hardware to consume).
-#
+ nvf = 4
+ wx_caps = all
+ r_caps = all
+ nvi = 2
+ rssnvi = 2
+ niqflint = 4
+ nethctrl = 4
+ neq = 8
+ nexactf = 4
+ cmask = all
+ pmask = 0x8
+
+# PF4 is the resource-rich PF that the bus/nexus driver attaches to.
+# It gets 32 MSI/128 MSI-X vectors.
[function "4"]
- wx_caps = all # write/execute permissions for all commands
- r_caps = all # read permissions for all commands
- nvi = 28 # NVI_UNIFIED
- niqflint = 202 # NFLIQ_UNIFIED + NLFIQ_WD + NFLIQ_CRYPTO (32)
- nethctrl = 100 # NETHCTRL_UNIFIED + NETHCTRL_WD
- neq = 256 # NEQ_UNIFIED + NEQ_WD
- nqpcq = 12288
- nexactf = 40 # NMPSTCAM_UNIFIED
- cmask = all # access to all channels
- pmask = all # access to all four ports ...
- nethofld = 1024 # number of user mode ethernet flow contexts
- ncrypto_lookaside = 16 # Number of lookaside flow contexts
- nclip = 320 # number of clip region entries
- nfilter = 496 # number of filter region entries
- nserver = 496 # number of server region entries
- nhash = 12288 # number of hash region entries
- nhpfilter = 0 # number of high priority filter region entries
- protocol = nic_vm, ofld, rddp, rdmac, iscsi_initiator_pdu,
iscsi_target_pdu, iscsi_t10dif, tlskeys, crypto_lookaside
- tp_l2t = 3072
+ wx_caps = all
+ r_caps = all
+ nvi = 32
+ rssnvi = 8
+ niqflint = 512
+ nethctrl = 1024
+ neq = 2048
+ nqpcq = 8192
+ nexactf = 456
+ cmask = all
+ pmask = all
+ nclip = 320
+
+ # TCAM has 6K cells; each region must start at a multiple of 128 cell.
+ # Each entry in these categories takes 2 cells each. nhash will use the
+ # TCAM iff there is room left (that is, the rest don't add up to 3072).
+ nfilter = 2032
+ nserver = 512
+ nhpfilter = 0
+ nhash = 16384
+ protocol = ofld, rddp, rdmac, iscsi_initiator_pdu, iscsi_target_pdu,
iscsi_t10dif
+ tp_l2t = 4096
tp_ddp = 2
tp_ddp_iscsi = 2
- tp_tls_key = 3
- tp_tls_mxrxsize = 17408 # 16384 + 1024, governs max rx data, pm max
xfer len, rx coalesce sizes
tp_stag = 2
tp_pbl = 5
tp_rq = 7
tp_srq = 128
-# We have FCoE and iSCSI storage functions on PF5 and PF6 each of which may
-# need to have Virtual Interfaces on each of the four ports with up to NCPUS
-# "Queue Sets" each.
-#
+# PF5 is the SCSI Controller PF. It gets 32 MSI/40 MSI-X vectors.
+# Not used right now.
[function "5"]
- wx_caps = all # write/execute permissions for all commands
- r_caps = all # read permissions for all commands
- nvi = 4 # NPORTS
- niqflint = 34 # NPORTS*NCPUS + NMSIX_EXTRA
- nethctrl = 32 # NPORTS*NCPUS
- neq = 64 # NPORTS*NCPUS * 2 (FL, ETHCTRL/TX)
- nexactf = 16 # (NPORTS *(no of snmc grp + 1 hw mac) + 1 anmc
grp)) rounded to 16.
- cmask = all # access to all channels
- pmask = all # access to all four ports ...
- nserver = 16
- nhash = 2048
- tp_l2t = 1020
- nclip = 64
- protocol = iscsi_initiator_fofld
- tp_ddp_iscsi = 2
- iscsi_ntask = 2048
- iscsi_nsess = 2048
- iscsi_nconn_per_session = 1
- iscsi_ninitiator_instance = 64
-
+ nvi = 1
+ rssnvi = 0
+# PF6 is the FCoE Controller PF. It gets 32 MSI/40 MSI-X vectors.
+# Not used right now.
[function "6"]
- wx_caps = all # write/execute permissions for all commands
- r_caps = all # read permissions for all commands
- nvi = 4 # NPORTS
- niqflint = 34 # NPORTS*NCPUS + NMSIX_EXTRA
- nethctrl = 32 # NPORTS*NCPUS
- neq = 66 # NPORTS*NCPUS * 2 (FL, ETHCTRL/TX) + 2 (EXTRA)
- nexactf = 32 # NPORTS + adding 28 exact entries for FCoE
- # which is OK since < MIN(SUM PF0..3, PF4)
- # and we never load PF0..3 and PF4 concurrently
- cmask = all # access to all channels
- pmask = all # access to all four ports ...
- nhash = 2048
- tp_l2t = 4
- protocol = fcoe_initiator
- tp_ddp = 2
- fcoe_nfcf = 16
- fcoe_nvnp = 32
- fcoe_nssn = 1024
-
+ nvi = 1
+ rssnvi = 0
# The following function, 1023, is not an actual PCIE function but is used to
# configure and reserve firmware internal resources that come from the global
# resource pool.
#
[function "1023"]
- wx_caps = all # write/execute permissions for all commands
- r_caps = all # read permissions for all commands
- nvi = 4 # NVI_UNIFIED
- cmask = all # access to all channels
- pmask = all # access to all four ports ...
- nexactf = 8 # NPORTS + DCBX +
- nfilter = 16 # number of filter region entries
+ wx_caps = all
+ r_caps = all
+ nvi = 4
+ rssnvi = 0
+ cmask = all
+ pmask = all
+ nexactf = 8
+ nfilter = 16
# For Virtual functions, we only allow NIC functionality and we only allow
@@ -482,107 +204,83 @@
# and GTS registers, the number of Ingress and Egress Queues must be a power
# of 2.
#
-[function "0/*"] # NVF
- wx_caps = 0x82 # DMAQ | VF
- r_caps = 0x86 # DMAQ | VF | PORT
- nvi = 1 # 1 port
- niqflint = 4 # 2 "Queue Sets" + NXIQ
- nethctrl = 2 # 2 "Queue Sets"
- neq = 4 # 2 "Queue Sets" * 2
- nexactf = 4
- cmask = all # access to all channels
- pmask = 0x1 # access to only one port ...
+[function "0/*"]
+ wx_caps = 0x82
+ r_caps = 0x86
+ nvi = 1
+ rssnvi = 1
+ niqflint = 2
+ nethctrl = 2
+ neq = 4
+ nexactf = 2
+ cmask = all
+ pmask = 0x1
+
+[function "1/*"]
+ wx_caps = 0x82
+ r_caps = 0x86
+ nvi = 1
+ rssnvi = 1
+ niqflint = 2
+ nethctrl = 2
+ neq = 4
+ nexactf = 2
+ cmask = all
+ pmask = 0x2
+
+[function "2/*"]
+ wx_caps = 0x82
+ r_caps = 0x86
+ nvi = 1
+ rssnvi = 1
+ niqflint = 2
+ nethctrl = 2
+ neq = 4
+ nexactf = 2
+ cmask = all
+ pmask = 0x1
+
+[function "3/*"]
+ wx_caps = 0x82
+ r_caps = 0x86
+ nvi = 1
+ rssnvi = 1
+ niqflint = 2
+ nethctrl = 2
+ neq = 4
+ nexactf = 2
+ cmask = all
+ pmask = 0x2
-
-[function "1/*"] # NVF
- wx_caps = 0x82 # DMAQ | VF
- r_caps = 0x86 # DMAQ | VF | PORT
- nvi = 1 # 1 port
- niqflint = 4 # 2 "Queue Sets" + NXIQ
- nethctrl = 2 # 2 "Queue Sets"
- neq = 4 # 2 "Queue Sets" * 2
- nexactf = 4
- cmask = all # access to all channels
- pmask = 0x2 # access to only one port ...
-
-[function "2/*"] # NVF
- wx_caps = 0x82 # DMAQ | VF
- r_caps = 0x86 # DMAQ | VF | PORT
- nvi = 1 # 1 port
- niqflint = 4 # 2 "Queue Sets" + NXIQ
- nethctrl = 2 # 2 "Queue Sets"
- neq = 4 # 2 "Queue Sets" * 2
- nexactf = 4
- cmask = all # access to all channels
- pmask = 0x1 # access to only one port ...
-
-
-[function "3/*"] # NVF
- wx_caps = 0x82 # DMAQ | VF
- r_caps = 0x86 # DMAQ | VF | PORT
- nvi = 1 # 1 port
- niqflint = 4 # 2 "Queue Sets" + NXIQ
- nethctrl = 2 # 2 "Queue Sets"
- neq = 4 # 2 "Queue Sets" * 2
- nexactf = 4
- cmask = all # access to all channels
- pmask = 0x2 # access to only one port ...
-
-# MPS features a 196608 bytes ingress buffer that is used for ingress buffering
-# for packets from the wire as well as the loopback path of the L2 switch. The
-# folling params control how the buffer memory is distributed and the L2 flow
-# control settings:
-#
-# bg_mem: %-age of mem to use for port/buffer group
-# lpbk_mem: %-age of port/bg mem to use for loopback
-# hwm: high watermark; bytes available when starting to send pause
-# frames (in units of 0.1 MTU)
-# lwm: low watermark; bytes remaining when sending 'unpause' frame
-# (in inuits of 0.1 MTU)
-# dwm: minimum delta between high and low watermark (in units of 100
-# Bytes)
-#
+# MPS has 192K buffer space for ingress packets from the wire as well as
+# loopback path of the L2 switch.
[port "0"]
- dcb = ppp, dcbx # configure for DCB PPP and enable DCBX offload
+ dcb = none
#bg_mem = 25
#lpbk_mem = 25
hwm = 60
lwm = 15
dwm = 30
- dcb_app_tlv[0] = 0x8906, ethertype, 3
- dcb_app_tlv[1] = 0x8914, ethertype, 3
- dcb_app_tlv[2] = 3260, socketnum, 5
#aec_retry_cnt = 4
flags = an_dis
- fec = none # FEC type none/rs/firecode
+ fec = none
[port "1"]
- dcb = ppp, dcbx
+ dcb = none
#bg_mem = 25
#lpbk_mem = 25
hwm = 60
lwm = 15
dwm = 30
- dcb_app_tlv[0] = 0x8906, ethertype, 3
- dcb_app_tlv[1] = 0x8914, ethertype, 3
- dcb_app_tlv[2] = 3260, socketnum, 5
#aec_retry_cnt = 4
flags = an_dis
- fec = none # FEC type none/rs/firecode
+ fec = none
[fini]
- version = 0x01000024
- checksum = 0x36cebfcb
-
-# Total resources used by above allocations:
-# Virtual Interfaces: 104
-# Ingress Queues/w Free Lists and Interrupts: 526
-# Egress Queues: 702
-# MPS TCAM Entries: 336
-# MSI-X Vectors: 736
-# Virtual Functions: 64
+ version = 0x1
+ checksum = 0xc3afb4e0
#
# $FreeBSD$
#
_______________________________________________
svn-src-all@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/svn-src-all
To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"
