Author: imp Date: Tue Mar 31 02:50:41 2009 New Revision: 190586 URL: http://svn.freebsd.org/changeset/base/190586
Log: Go back to filtering all PHY addresses above 16 since at least two cards still have issues with them. Maybe this is a silicon rev? In any case, doing the filtering only for the AX88790 for the moment. Modified: head/sys/dev/ed/if_ed_pccard.c Modified: head/sys/dev/ed/if_ed_pccard.c ============================================================================== --- head/sys/dev/ed/if_ed_pccard.c Tue Mar 31 02:50:18 2009 (r190585) +++ head/sys/dev/ed/if_ed_pccard.c Tue Mar 31 02:50:41 2009 (r190586) @@ -1101,8 +1101,14 @@ ed_miibus_readreg(device_t dev, int phy, * the internal PHY, a bit has to be set, when accessing the external * PHYs, it must be clear. See Errata 1, page 51, in the AX88790 * datasheet for more details. + * + * Also, PHYs above 16 appear to be phantoms on some cards, but not + * others. Registers read for this are often the same as prior values + * read. Filter all register requests to 17-31. */ if (sc->chip_type == ED_CHIP_TYPE_AX88790) { + if (phy > 0x10) + return (0); if (phy == 0x10) ed_asic_outb(sc, ED_AX88X90_GPIO, ED_AX88X90_GPIO_INT_PHY); @@ -1130,15 +1136,10 @@ ed_miibus_writereg(device_t dev, int phy struct ed_softc *sc; sc = device_get_softc(dev); - /* - * The AX88790 has an interesting quirk. It has an internal phy that - * needs a special bit set to access, but can also have additional - * external PHYs set for things like HomeNET media. When accessing - * the internal PHY, a bit has to be set, when accessing the external - * PHYs, it must be clear. See Errata 1, page 51, in the AX88790 - * datasheet for more details. - */ + /* See ed_miibus_readreg for details */ if (sc->chip_type == ED_CHIP_TYPE_AX88790) { + if (phy > 0x10) + return (0); if (phy == 0x10) ed_asic_outb(sc, ED_AX88X90_GPIO, ED_AX88X90_GPIO_INT_PHY); _______________________________________________ svn-src-all@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/svn-src-all To unsubscribe, send any mail to "svn-src-all-unsubscr...@freebsd.org"