The function STAXUtilQueryAllTests is really great. It is all that I need.
Just a last question: when I set tcstatus to pass of fail I use to add
information available from the STAX Monitor in the "Information" column.
Can I retrieve this information too in the testcase Map?
I think it should be added to the code:
for testcase in result:
tcName = testcase['testcaseName']
numPasses = int(testcase['numPasses'])
numFails = int(testcase['numFails'])
elapsedTime = testcase['elapsedTime']
numStarts = int(testcase['numStarts'])
totalTestcases = totalTestcases + 1
totalPasses = totalPasses + numPasses
totalFails = totalFails + numFails
testcaseMap[tcName] = [numPasses, numFails, elapsedTime,
numStarts]
2013/7/8 Sharon Lucas <luc...@us.ibm.com>
> No, there isn't a STAX variable which traces the number of passed or
> failed test cases. The STAX Monitor (when monitoring a STAX job that's
> already been started) gets testcase information like the # passed/failed
> test cases by submitting a "STAX LIST JOB <Job ID> TESTCASES" request (the
> job id of the current STAX job is provided in variable STAXJobID) and then
> adds together the numPasses and numFails for each testcase provided in the
> list result from this request. You can submit this request via a STAX job
> using the <stafcmd> element and then iterate through the list, accumulating
> the numPasses and numFails for each testcase to get the total number of
> passes and fails. For more information on the "STAX LIST JOB <JobID>
> TESTCASES" request and its result, see sub-section "LIST" in section
> "Request Syntax" in the STAX User's Guide at
> http://staf.sourceforge.net/current/STAX/staxug.html#Header_List.
>
> Note that STAX provides a function named STAXUtilQueryAllTests in the
> libraries/STAXUtil.xml file that queries the results for all testcases in
> the currently running job, accumulating the total number of testcases,
> passes, and fails recorded so far as well as providing a map of all the
> testcases and their passes, fails, elapsed times, and number of starts.
> So, you can simply import the STAXUtilQueryAllTests function from the
> STAXUtil.xml file and call it to get the total number of testcase passes
> and fails instead of writing a function yourself that does the same thing.
> The STAXUtil.xml file is in the libraries subdirectory when you extract the
> STAXVxxx.tar or .jar file that you can download from the "Download STAX
> Service" web page at http://staf.sourceforge.net/getstax.php. The STAX
> User's Guide, "Appendix A: STAX XML Document Examples", section "STAX
> Libraries Containing Common Utility Functions", sub-section "STAX Utility
> Functions" at
> http://staf.sourceforge.net/current/STAX/staxug.html#Header_STAXUtilgives an
> overview of each function provided in the STAXUtil.xml file. See
> http://staf.sourceforge.net/current/STAXLibraries/index.html (accessible
> via the "Download STAX Service" web page at
> http://staf.sourceforge.net/getstax.php when you click on "STAX V3
> Library Function Definitions for STAFUpgradeUtil and STAXUtil") for
> detailed documentation on this function and other functions provided in the
> STAXUtil.xml file. It says:
>
> *STAXUtilQueryAllTests *
>
> Query the results for all testcases in the currently running job,
> accumulating the total number of testcases, passes, and fails recorded so
> far as well as a map of all the testcases and their passes, fails, elapsed
> time, and number of starts.
>
> *This function does not allow any arguments*
>
> *Returns:*
>
> Returns the following in a list:
>
> - Return code (0 if successful; if not successful, set to the return
> code from the STAX LIST TESTCASES request or 1 if an error occurs parsing
> the results from the LIST request),
> - Result (blank if the query is successful; otherwise, it contains
> information about the error),
> - List containing the total number of testcases, the total number of
> passes, and the total number of fails (an empty list if fails),
> - Testcase results map containing an entry for each testcase (an empty
> map if fails). The map's key is testcase name and its value is a list of
> the number of passes, number of fails, elapsed time, and number of starts.
>
> For example, if the query of testcase results was successful and there
> were 2 testcases, TestA and TestB, where Test A had 4 passes, 1 fail, ran
> for 5 minutes and 23 seconds, and was started once and Test B had 1 pass, 0
> fails, ran for 26 hours 5 minutes and 45 seconds and was started 5 times,
> and "Log TC Elapsed Time" and "Log TC Num Starts" are enabled for the job,
> the following would be returned:
>
> [0, '', [2, 5, 1], {'TestA': [4, 1, '00:05:23', 1], 'TestB': [1, 0,
> '26:05:45', 5]}]
>
> If the LIST TESTCASES request failed, the following could be returned if a
> Python exception occurred while parsing the result:
>
> [1, 'Error while processing result from STAX LIST TESTCASES JOB 5 ...',
> [], {}]
>
> *Example:*
>
> Here's an example that queries the results of all testcases run so far in
> the current job. If the query is successful, it checks if there have been
> any testcase failures logged so far. If so, it logs a message and sends it
> to the STAX Monitor. If the query fails, it logs a failure message and
> sends it to the STAX Monitor.
>
> <call function="'STAXUtilQueryAllTests'"/>
>
> <script>[rc, result, totals, testcases] = STAXResult</script>
>
> <if expr="rc == 0">
> <sequence>
> <script>[totalTests, totalPasses, totalFails] = totals</script>
> <if expr="totalFails > 0">
> <call function="'STAXUtilLogAndMsg'">
> 'Total Testcases: %s, Total Passes: %s, Total Fails:
> %s\nTestcases: %s' % \
> (totalTests, totalPasses, totalFails, testcases)
> </call>
> </if>
> </sequence>
> <else>
> <call function="'STAXUtilLogAndMsg'">
> 'STAXUtilQueryAllTests failed. RC=%s Result=%s' % (rc, result)
> </call>
> </else>
> </if>
>
> --------------------------------------------------------------
> Sharon Lucas
> IBM Austin, luc...@us.ibm.com
> (512) 286-7313 or Tieline 363-7313
>
>
>
>
> From: Luca Robusto <lucarobu...@gmail.com>
> To: "staf-users@lists.sourceforge.net" <
> staf-users@lists.sourceforge.net>,
> Date: 07/08/2013 04:52 AM
> Subject: [staf-users] Number of Passes and Failed TC
> ------------------------------
>
>
>
> Is there a variable which traces number of passes or failed testcases, so
> as we see them on the Stax Monitor, or I have to implement my own one?
>
> Luca.
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> staf-users mailing list
> staf-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/staf-users
>
>
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
staf-users mailing list
staf-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/staf-users
