Hi Sharon,
Thanks a lot. It worked .
Thanks,
Vamsee
On Wed, Feb 29, 2012 at 4:08 AM, Sharon Lucas <luc...@us.ibm.com> wrote:
> Hi Vamsee,
>
> Note, the current version of STAF is V3.4.8 (not 3.4.1) so you may want to
> upgrade to take advantage of the latest bug fixes and new features.
>
> Your init script needs to source STAFEnv.sh (located in the directory
> where you installed STAF, e.g. /usr/local/staf) to set the environment
> variables needed by STAF before starting STAFProc. Also, pass the
> STAF_INSTANCE_NAME to STAFEnv.sh (generally this should be STAF). When you
> start STAFProc, you should redirect its output to a file (e.g.
> /usr/local/staf/STAFProc.out) as this output shows if STAFProc was
> initialized or if an error occurred (so you can check this file if you
> encounter a problem). For example:
>
> . /usr/local/staf/STAFEnv.sh STAF
> STAFProc >> /usr/local/staf/STAFProc.out &
>
> Note that you should test out your init script manually. For example:
>
> /etc/rc.d/stafproc start
>
> Here is a sample init script that you can use to start STAFProc upon
> boot-up on FreeBSD and to shutdown STAFProc when the system shuts down.
> Cut and paste its content into a file named "stafproc" and put this file
> in the /etc/rc.d directory. Give this "stafproc" file execution
> permissions (e.g. chmod +u+x stafproc).
>
> #!/bin/sh
> #
> # PROVIDE: stafproc
> # REQUIRE: networking filesystems
> # KEYWORD: shutdown
> #
> # Add the following line to /etc/rc.conf to enable STAFProc
> #
> # stafproc_enable="YES"
> #
>
> . /etc/rc.subr
>
> name="stafproc"
> start_cmd="stafproc_start"
> stop_cmd="stafproc_stop"
> stafproc_enable="yes"
> rcvars=stafproc_enable
>
> STAF_HOME=/usr/local/staf
> STAF_INSTANCE_NAME=STAF
>
> # Include any directories you want in STAFProc's PATH
> PATH=/usr/local/jdk1.5.0/bin:$PATH
> export PATH
>
> stafproc_start()
> {
> echo "Starting STAFProc..."
> . $STAF_HOME/STAFEnv.sh $STAF_INSTANCE_NAME
>
> # Check if STAFProc is already running
> STAF local PING PING > /dev/null
> if [ $? -eq 0 ]; then
> echo "STAFProc is already running with
> STAF_INSTANCE_NAME=$STAF_INSTANCE_NAME"
> return 0
> fi
>
> STAFProc >> $STAF_HOME/STAFProc.out &
> RETVAL=$?
>
> echo "STAFProc output will be written to /usr/local/staf/STAFProc.out"
>
> if [ $RETVAL -eq 0 ]; then
> echo "Waiting for STAFProc to finish initalizing..."
> # Ping every 2s (up to 30 attempts) until returns RC 0
> count=1
> while [ $count -le 30 ]; do
> sleep 2
> STAF local PING PING > /dev/null
> RETVAL=$?
> if [ $RETVAL -eq 0 ]; then
> echo "STAFProc initialized"
> count=30
> fi
> count=$(($count+1))
> done
> fi
>
> echo
> return $RETVAL
> }
>
> stafproc_stop()
> {
> echo "Shutting down STAFProc..."
>
> # Shutdown STAF (stops any STAF services and STAFProc)
> . $STAF_HOME/STAFEnv.sh $STAF_INSTANCE_NAME
> STAF local SHUTDOWN SHUTDOWN
> RETVAL=$?
> if [ $RETVAL -eq 0 ]; then
> echo "Waiting for STAFProc to finish shutdown..."
> # Ping every 2s (up to 60 attempts) until get RC 21
> # which means "STAF not running"
> count=1
> while [ $count -le 60 ]; do
> sleep 2
> STAF local PING PING > /dev/null
> RETVAL=$?
> if [ $RETVAL -eq 21 ]; then
> echo "STAFProc ended normally"
> RETVAL=0
> count=60
> fi
> count=$(($count+1))
> done
> elif [ $RETVAL -eq 21 ]; then
> echo "STAFProc is not currently running so shutdown is ignored"
> fi
>
> echo
> return $RETVAL
> }
>
> load_rc_config $name
> run_rc_command "$1"
>
>
> Init Script Customization Notes:
>
> 1) If you installed STAF to a different location than /usr/local/staf then
> change the STAF_HOME variable.
>
> 2) This init script adds a Java bin directory to the PATH environment
> variable as follows so that if STAFProc registers any Java services it can
> find the java executable without specifying the JVM option. Customize this
> for the the location of your JVM (or any other directories you want to have
> in STAFProc's PATH) or remove these lines if you don't need to change the
> PATH.
>
> # Include any directories you want in STAFProc's PATH
> PATH=/usr/local/jdk1.5.0/bin:$PATH
> export PATH
>
>
> Make sure to test that the stafproc init script is working correctly by
> attempting to stop and start and restart STAFProc as follows:
>
> *# /etc/rc.d/stafproc stop*
> Shutting down STAFProc...
> Response
> --------
>
> Waiting for STAFProc to finish shutdown...
> STAFProc ended normally
>
> *# /etc/rc.d/stafproc start*
> Starting STAFProc...
> STAFProc output will be written to /usr/local/staf/STAFProc.out
> Waiting for STAFProc to finish initalizing...
> STAFProc initialized
>
> *# /etc/rc.d/stafproc restart*
> Shutting down STAFProc...
> Response
> --------
>
> Waiting for STAFProc to finish shutdown...
> STAFProc ended normally
>
> Starting STAFProc...
> STAFProc output will be written to /usr/local/staf/STAFProc.out
> Waiting for STAFProc to finish initalizing...
> STAFProc initialized
>
> #
>
> Finally, edit file /etc/rc.conf and add the following line to enable the
> stafproc service:
>
> stafproc_enable="YES"
>
> Now try rebooting the system to verify that it is shutting down and
> starting STAFProc when the system is rebooted.
>
> I plan on adding these instructions for FreeBSD to section "11. Starting
> STAFProc during system reboot" in the STAF Installation Guide at
> http://staf.sourceforge.net/current/STAFInstall.pdf.
>
> --------------------------------------------------------------
> Sharon Lucas
> IBM Austin, luc...@us.ibm.com
> (512) 286-7313 or Tieline 363-7313
>
>
>
>
> From: arya vamsee <vamsee...@gmail.com>
> To: staf-users@lists.sourceforge.net,
> Date: 02/28/2012 12:26 PM
> Subject: [staf-users] start STAF on Free BSD after reboot
> ------------------------------
>
>
>
> Hi All,
>
> I am a new user of STAF.
> I have installed STAF on FreeBSD 7.4 .
>
> My requirement is to start the STAF Process after boot process.
>
> I am able to start STAF process manually. Below is the output after
> starting the process manually:
> bsd72# /usr/local/staf/bin/STAFProc
>
> Machine : bsd72
> Machine nickname : bsd72
> Startup time : 20120229-04:38:20
>
> STAFProc version 3.4.1 initialized
>
>
> I have placed a script in the following location, to start STAF process
> automatically after bootup, but it is not working.
> location : /etc/rc.d/ ( path )
>
> ==============================================
> Script name : staf
> Script content :
>
> #!/bin/sh
> # PROVIDE: staf
> # REQUIRE: dhclient sshd hostapd securelevel
> # KEYWORD: shutdown
>
> . /etc/rc.subr
>
> name="staf"
> rcvar=`set_rcvar`
> force_depend dhclient
>
> staf_bsd_start()
> {
> echo "Starting the STAF Process"
> ( /usr/local/staf/bin/STAFProc & )
> echo "Started the STAF Proces...."
> }
> : ${set_rcvar:="YES"}
>
> command="/usr/local/staf/bin/STAFProc &"
> load_rc_config $name
> run_rc_command "$1"
>
> ==============================================
>
> /var/log/messages shows following messages related to staf script ( which
> was kept to run at boot time )
>
> Feb 28 04:30:46 bsd72 root: /etc/rc: DEBUG: checkyesno: staf_enable is set
> to YES.
> Feb 28 04:30:46 bsd72 root: /etc/rc: DEBUG: run_rc_command: doit:
> /usr/local/staf/bin/STAFProc &
>
> but it throws the following error, when I try to check if staf has started
>
> bsd72# staf bsd72 ping ping
> Error registering with STAF, RC: 21
>
>
> Is there a log file related to STAF, to check what is the error and why it
> is not able to start the STAF process after reboot
> Please let me know, if there is a solution for this issue.
>
> Thanks,
> Vamsee
> ------------------------------------------------------------------------------
> Keep Your Developer Skills Current with LearnDevNow!
> The most comprehensive online learning library for Microsoft developers
> is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3,
> Metro Style Apps, more. Free future releases when you subscribe now!
> http://p.sf.net/sfu/learndevnow-d2d
> _______________________________________________
> staf-users mailing list
> staf-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/staf-users
>
>
------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________
staf-users mailing list
staf-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/staf-users
