Hi again!
Well if you insert it like I did below it should work just fine. But as I said,
I'm not sure if STAFProc writes to STDERR at all.
But remember: IF a process writes anything to STDERR, you won't catch these
messages without redirecting STDERR, of course.
Regards,
René Slowenski
Ingres QA
From: Richard Pitkin [mailto:richard_pit...@us.ibm.com]
Sent: Freitag, 10. Dezember 2010 14:11
To: Rene Slowenski
Cc: staf-users@lists.sourceforge.net; Sharon Lucas
Subject: Re: [staf-users] How to collect data on failure
Hi,
Thank you for the suggestion, but I found that the best I could do was to
redirect standard output to a file. Currently I am going to use:
REM Sets up the STAF environment variables and starts STAFProc
setlocal
call "C:\STAF\STAFEnv.bat"
set here=%cd%
if not exist %here%\logs mkdir %here%\logs
if "201" == "%DATE:~0,3%" set
rnow=%DATE:~0,4%%DATE:~5,2%%DATE:~8,2%%TIME:~0,2%%TIME:~3,2%
if not "201" == "%DATE:~0,3%" set
rnow=%DATE:~10,4%%DATE:~4,2%%DATE:~7,2%%TIME:~0,2%%TIME:~3,2%
set rnow=%rnow: =0%
set outputlist=%here%\logs\StafOutput%rnow%.log
start "Start STAF 3.4.2" /min "CMD /C C:\STAF\bin\STAFProc.exe >%outputlist%
2>&1"
endlocal
This will keep logs going back awhile, and require me to 'cleanup' logs to some
extent. I found I could not use '2>&1' on the redirection because the
command line parsing for STAFProc failed. So the above is the best I could do.
I still need to understand if I will need the trace code on service usage.
regards,
Richard
"For a successful technology, reality must take precedence over public
relations, for nature cannot be fooled." R. P. Feynman, "Report of the
Presidential Commission on the Space Shuttle Challenger Accident"
"Rene Slowenski" <rene.slowen...@ingres.com>
12/10/2010 04:10 AM
To
Sharon Lucas/Austin/i...@ibmus, Richard Pitkin/Westford/i...@lotus
cc
<staf-users@lists.sourceforge.net>
Subject
Re: [staf-users] How to collect data on failure
Hello!
It's just a suggestion, but I think it would be better to use:
STAFProc > C:\staf\stafproc.out 2>&1
This way you make sure that both STDOUT and STDERR are redirected to the file.
I am not currently sure if STAFProc writes anything to STDERR, though.
Regards,
René Slowenski
Ingres QA
________________________________
Von: Sharon Lucas [mailto:luc...@us.ibm.com <mailto:luc...@us.ibm.com> ]
Gesendet: Do 09.12.2010 16:33
An: Richard Pitkin
Cc: staf-users@lists.sourceforge.net
Betreff: Re: [staf-users] How to collect data on failure
When you say that "staf appeared to just quit", are you saying that STAFProc
was terminated on machine afw2008r2a ? If so, you should check STAFProc's
output to see if there is any error messages about why it died. You can
redirect STAFProc's output to a file when you start STAFProc on afw2008r2a to
make sure STAFProc's output is saved. For example:
STAFProc > C:\staf\stafproc.out
Let me know what STAFProc's output contains when it has been killed.
--------------------------------------------------------------
Sharon Lucas
IBM Austin, luc...@us.ibm.com
(512) 286-7313 or Tieline 363-7313
From: Richard Pitkin/Westford/i...@lotus
To: staf-users@lists.sourceforge.net
Date: 12/09/2010 09:15 AM
Subject: [staf-users] How to collect data on failure
________________________________
Hi,
We have a system that uses staf to run client/server testing. We had a failure
where during a multi-hour run, staf appeared to just quit. In particular we
received the following output:
13393 Error 20101209-02:13:26 afclient34....runTestSuite getOtherOSType:
Failure looking for OSName using the 'STAF VAR' service on target machine
'afw2008r2a...'! RC=16 STAFResult=STAFConnectionProviderConnect: Error
performing test read on connected endpoint: recv() RC=111: 22, Endpoint:
tcp://afw2008r2a...
13394 Fail 20101209-02:13:26 afclient34....runTestSuite getOtherOSType:
Terminating function. Error: Failure looking for OSName using the 'STAF VAR'
service on target machine 'afw2008r2a....'! RC=16
STAFResult=STAFConnectionProviderConnect: Error performing test read on
connected endpoint: recv() RC=111: 22, Endpoint: tcp://afw2008r2a....
13395 Error 20101209-02:13:26 killDomino: BTN3: Server1(afw2008r2a...):
Terminating function - Error: Failure looking for OSName using the 'STAF VAR'
service on target machine 'afw2008r2a....'! RC=16
STAFResult=STAFConnectionProviderConnect: Error performing test read on
connected endpoint: recv() RC=111: 22, Endpoint: tcp://afw2008r2a....
The job started at 20101208-11:58:06 so we know that this worked for quite
awhile.
The failing system is W2008r2 and the controller machine of the client and
servers is Linux.
The W2008r2 has version:
staf afw2008r2a misc version
Response
--------
3.3.4
The controller is:
staf product-la misc version
Response
--------
3.3.4.1
I checked the staf directories for information to see if there was any dumps of
the jvm but there did not seem to be anything.
Suggestions on what logging to enable to try and find out what the root issue
is that we need to correct would be helpful. We often have jobs that last 24
hours, and this has happened before, so I am looking for a process that will be
able to gather relevant information to resolve this.
Thanks in advance,
"For a successful technology, reality must take precedence over public
relations, for nature cannot be fooled." R. P. Feynman, "Report of the
Presidential Commission on the Space Shuttle Challenger Accident"[attachment
"smime.p7s" deleted by Sharon Lucas/Austin/IBM]
------------------------------------------------------------------------------
This SF Dev2Dev email is sponsored by:
WikiLeaks The End of the Free Internet
http://p.sf.net/sfu/therealnews-com <http://p.sf.net/sfu/therealnews-com>
_______________________________________________
staf-users mailing list
staf-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/staf-users
<https://lists.sourceforge.net/lists/listinfo/staf-users>
------------------------------------------------------------------------------
Lotusphere 2011
Register now for Lotusphere 2011 and learn how
to connect the dots, take your collaborative environment
to the next level, and enter the era of Social Business.
http://p.sf.net/sfu/lotusphere-d2d
_______________________________________________
staf-users mailing list
staf-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/staf-users
