No, we don't know of any issues with SP2 for Vista. Per the following note in the STAF User's Guide, try specifying the SAMECONSOLE option on your PROCESS START requset to see if that makes a difference.
1. On Windows systems, if you are redirecting stdin/out/err and are not using SAMECONSOLE, it is recommended that you redirect all three input/output streams. If one or two streams are redirected, but not all three, the non-redirected streams will not be available to the application. For example, if stdout and stderr are redirected, but not stdin, then the application will receive errors if it tries to read from standard input. As another example, if stdin and stdout are redirected, but not stderr, then you will not see any of the standard error output displayed in the console window. This problem only occurs when using NEWCONSOLE, which is the default. You may freely redirect any combination of stdin, stdout, and stderr when using SAMECONSOLE. This problem is due to a known limitation in the Windows API. Is STAFProc being run as an Administrator on this Windows Vista machine? Can you run any other command via a STAF PROCESS START request via on this Windows machine, such as notepad ? -------------------------------------------------------------- Sharon Lucas IBM Austin, luc...@us.ibm.com (512) 286-7313 or Tieline 363-7313 Daria Holden <dariahol...@gmail.com> 07/27/2009 03:23 PM To staf-users@lists.sourceforge.net cc Subject [staf-users] subversion checkout I have one machine where the command: d:\>staf local process start shell command "svn checkout <my server>/trunk/Test d:/whargarbl" wait STDERRTOSTDOUT RETURNSTDOUT does a successful checkout, and another machine where the same command starts an svn and a STAF process, but both just hang, using 0 CPU time even after a few minutes. Same machine hardware(dual xeon), architecture(x64) and OS (vista business) except the one that works has SP1, and the one that doesn't has SP2. Both are running STAF 3.3.4. Both have all firewalls turned off. Both machines have trust level 5 set for themselves. I have administrator privileges on both machines. On the machine that isn't returning from the staf call, I can make the same call directly on the command line( i.e. svn checkout <myserver>/trunk/Test d:/fbxrd) and it will work just fine. So it's just when I wrap the command in a STAF process call that it isn't working. Do you know of any issues with SP2 for Vista? Could there be a configuration option I missed somewhere? Thanks, Daria On Mon, Jul 27, 2009 at 7:50 AM, <staf-users-requ...@lists.sourceforge.net> wrote: > Send staf-users mailing list submissions to > staf-users@lists.sourceforge.net > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.sourceforge.net/lists/listinfo/staf-users > or, via email, send a message with subject or body 'help' to > staf-users-requ...@lists.sourceforge.net > > You can reach the person managing the list at > staf-users-ow...@lists.sourceforge.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of staf-users digest..." > > > Today's Topics: > > 1. Re: How to get all job and terminate them? (David Bender) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 27 Jul 2009 08:49:38 -0500 > From: David Bender <bda...@us.ibm.com> > Subject: Re: [staf-users] How to get all job and terminate them? > To: Li Wiston <wiston.l...@gmail.com> > Cc: staf-users@lists.sourceforge.net, sha...@acmet.com > Message-ID: > <of7799431c.9beb68b4-on86257600.004b100d-86257600.004bf...@us.ibm.com> > Content-Type: text/plain; charset="utf-8" > > STAF provides APIs (for Java, Python, Perl, and Tcl) that allow you to > submit requests to STAF services. So, in your program you could submit a > STAX LIST JOBS request, then iterate through the results for each Job ID, > and then submit a STAX TERMINATE JOB xx request. > > Thanks, > David > > David Bender > STAF/STAX Development > IBM Software Group, WPLC > > 11501 Burnet Rd. > Bldg. 903-5B002 > Austin, TX 78758-3400 > > Phone (T/L): 1-512-286-5315 (363-5315) > ITN: 23635315 > Email: bda...@us.ibm.com > > > > > > > Li Wiston <wiston.l...@gmail.com> > 07/27/2009 08:26 AM > > To > sha...@acmet.com > cc > staf-users@lists.sourceforge.net, David Bender/Austin/i...@ibmus > Subject > Re: [staf-users] How to get all job and terminate them? > > > > > > > > > Yes, I known his. > > whether i can get the job IDs and assign them to variable or not ? so that > terminate the job one by one in my program? > > or any other way can retrieve each of iDs? > > thanks. > -Wiston > > > > 2009/7/27 Shahid <sha...@acmet.com> >>> But, I want to terminate all jobs by program. so, I have to get the > lists for pending job ids by program or need to terminate all jobs >>> if STAF provides such a command? > > I think STAF does not provide any command for terminating all pending > jobs. But if you will re-start STAF framework, then all the pending jobs > will be terminated automatically. > > Without re-starting STAF framework, you can terminate all pending jobs > with the help of program by using following alog: > > 1. List all the pending jobs > 2. Extract pending job ID > 3. Terminate the job with the help of job ID [This should be done one > by one] > > > With Regards, > Mohammad Shahid Jamal > > > > From: Li Wiston [mailto:wiston.l...@gmail.com] > Sent: Sunday, July 26, 2009 6:44 AM > > To: sha...@acmet.com > Cc: David Bender; staf-users@lists.sourceforge.net > Subject: Re: [staf-users] How to get all job and terminate them? > > Thanks Shahid > > But, I want to terminate all jobs by program. so, I have to get the lists > for pending job ids by program or need to terminate all jobs > if STAF provides such a command? > > > 2009/7/24 Shahid <sha...@acmet.com> > You can get the pending jobs with the help of following command: > > STAF <MACHINE NAME> STAX LIST JOBS > > Above command will list all the pending job submitted to STAX execution > engine. > > You can terminate the pending STAX Job execution with the help of > following command: > > STAF <MACHINE NAME> STAX TERMINATE JOB <JOB ID> > >>> Which reason can result in the block jobs? > > Currently I don?t know the exact reason behind it. > > But before few months, we have also faced similar problem. The reason of > the problem was, using the DOS command in STAX Job, at the time of > executing the DOS command in STAX Job, Job gets hanged. Please check this > might be the case. > > With Regards, > Mohammad Shahid Jamal > > > > > > From: Li Wiston [mailto:wiston.l...@gmail.com] > Sent: Friday, July 24, 2009 11:50 AM > To: sha...@acmet.com > Cc: David Bender; staf-users@lists.sourceforge.net > Subject: Re: [staf-users] How to get all job and terminate them? > > Hi, all > > > For unknown issues, there are some blocked jobs for the STAX execution, my > question is How to get all job and terminate them? and which reason can > result in the block jobs? > > > can anyone give us some clue? > > thanks in advance. > > > > > > 2009/7/21 Shahid <sha...@acmet.com> >>> Can you clarify exactly what you mean by "profiling" STAX job > execution? > > Profiling of STAX Job means to gather following information about STAX Job > execution: > > 1. Memory / CPU usage by services / methods written in STAX Job > 2. Checking the memory leak during STAX Job execution > 3. Checking the dead lock condition during STAX Job execution > 4. Time taken by STAF services used in STAX Job and method written in > STAX Job for completing the request > > > Hope, now you got the purpose of profiling of STAX Job. > >>>The following Help forum thread has some more information: >>> >>>http://sourceforge.net/forum/message.php?msg_id=7421451 > > Thanks for providing the link. I will check information present at: > http://sourceforge.net/forum/message.php?msg_id=7421451 and let you know > it status. > > > Thanks and Regards, > Mohammad Shahid Jamal > > > > From: David Bender [mailto:bda...@us.ibm.com] > Sent: Monday, July 20, 2009 7:22 PM > To: sha...@acmet.com > Cc: staf-users@lists.sourceforge.net > Subject: Re: [staf-users] How to profile STAX Job Execution? > > > Can you clarify exactly what you mean by "profiling" STAX job execution? > If you mean analyzing memory usage, performance, etc., there is no > software provided with STAF/STAX to do that. However, STAX is written in > Java, so you could use Java profiling tools to do the analysis. > > The following Help forum thread has some more information: > > http://sourceforge.net/forum/message.php?msg_id=7421451 > > Thanks, > David > > David Bender > STAF/STAX Development > IBM Software Group, WPLC > > 11501 Burnet Rd. > Bldg. 903-5B002 > Austin, TX 78758-3400 > > Phone (T/L): 1-512-286-5315 (363-5315) > ITN: 23635315 > Email: bda...@us.ibm.com > > > > > > "Shahid" <sha...@acmet.com> > 07/20/2009 12:42 AM > > > Please respond to > sha...@acmet.com > > > > To > <staf-users@lists.sourceforge.net> > cc > > Subject > [staf-users] How to profile STAX Job Execution? > > > > > > > > > > > How we can profile the STAX Job execution? Is there any software available > for profiling STAX Job execution? > > With Regards, > Mohammad Shahid Jamal > > > ------------------------------------------------------------------------------ > Enter the BlackBerry Developer Challenge > This is your chance to win up to $100,000 in prizes! For a limited time, > vendors submitting new applications to BlackBerry App World(TM) will have > the opportunity to enter the BlackBerry Developer Challenge. See full > prize > details at: http://p.sf.net/sfu/Challenge > _______________________________________________ > staf-users mailing list > staf-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/staf-users > > ------------------------------------------------------------------------------ > Enter the BlackBerry Developer Challenge > This is your chance to win up to $100,000 in prizes! For a limited time, > vendors submitting new applications to BlackBerry App World(TM) will have > the opportunity to enter the BlackBerry Developer Challenge. See full > prize > details at: http://p.sf.net/sfu/Challenge > _______________________________________________ > staf-users mailing list > staf-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/staf-users > > > ------------------------------------------------------------------------------ > _______________________________________________ > staf-users mailing list > staf-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/staf-users > > > -------------- next part -------------- > An HTML attachment was scrubbed... > > ------------------------------ > > ------------------------------------------------------------------------------ > > > ------------------------------ > > _______________________________________________ > staf-users mailing list > staf-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/staf-users > > > End of staf-users Digest, Vol 38, Issue 44 > ****************************************** > ------------------------------------------------------------------------------ _______________________________________________ staf-users mailing list staf-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/staf-users
------------------------------------------------------------------------------
_______________________________________________ staf-users mailing list staf-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/staf-users
