Hi,
I am not sure where exactly you want to put this line:
xlog("L_NOTICE", "This is a standard log line\n");
I had put the same in kamailio.cfg under route
1. Our xlog.so is in /usr/lib64/kamailio/modules and it is getting loaded in
modules section of kamailio.cfg.
2. I did everything else as well as you mentioned below, including restart of
both rsyslog and kamailio but still no output.
# Kamailio (OpenSER) messages, make sure this spacing is done with tabs, spaces
may cause errors
local7.* -/var/log/kamailio
#!ifdef WITH_SRCPATH
mpath="modules/"
#!else
mpath="/usr/lib64/kamailio/modules/"
#!endif
loadmodule "xlog.so"
3. kamctl fifo debug
DEBUG:: 3
Manoj K. Gupta
-----Original Message-----
From: sr-users [mailto:sr-users-boun...@lists.sip-router.org] On Behalf Of
Daniel Grotti
Sent: 02 January 2017 08:54
To: sr-users@lists.sip-router.org
Subject: Re: [SR-Users] Help Asterisk with Kamailio unable to register with
remote VOIP providers
Hi,
please configure this in your kamailio.cfg:
debug=3 # debug level, 1 is low and 4 is high (lots of output)
log_facility=LOG_LOCAL7
...
loadmodule "/usr/local/lib/kamailio/modules/xlog.so"
...
As well as this in your rsyslog.cfg:
# Kamailio (OpenSER) messages, make sure this spacing is done with tabs,
spaces may cause errors
local7.* -/var/log/kamailio
Please notice that you have to restart kamailio and rsyslog.
Also remember to set the log facility in your xlog lines, e.g:
xlog("L_NOTICE", "This is a standard log line\n");
After restarting the processes, what do you see in /var/log/kamailio ?
What do you get from kamctl fifo debug ?
--
Daniel Grotti
On 01/02/2017 04:13 PM, Manoj Gupta wrote:
> Hi Daniel,
>
> Thanks for the quick revert!
>
> Yes we have configured the same in /etc/rsyslog.conf as we do not have
> /etc/syslog.conf
>
> Once we restart the rsyslog service we can see /var/log/kamailio file is
> getting created as below:
>
> [root@mt log]# pwd
> /var/log
> [root@mt log]# ls -l kamai*
> -rw------- 1 root root 0 Jan 2 10:10 kamailio
> [root@mt log]#
>
>
> But nothing is getting logged in the log file. In kamailio.cfg logging levels
> are set as below:
>
> ### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
> #!ifdef WITH_DEBUG
> debug=3
> log_stderror=yes
> #!else
> debug=2
> log_stderror=yes
> #!endif
>
> memdbg=5
> memlog=5
>
> #log_facility=LOG_LOCAL0
> log_facility=LOG_LOCAL6
>
>
>
>
>
> Manoj K. Gupta
>
> -----Original Message-----
> From: sr-users [mailto:sr-users-boun...@lists.sip-router.org] On Behalf Of
> Daniel Grotti
> Sent: 02 January 2017 08:10
> To: sr-users@lists.sip-router.org
> Subject: Re: [SR-Users] Help Asterisk with Kamailio unable to register with
> remote VOIP providers
>
> Hi,
> have you configured kamailio in order to log to /var/log/kamailio
> instead of syslog ?
>
> https://www.kamailio.org/dokuwiki/doku.php/utils:basic-syslog-configuration
>
> --
> Daniel Grotti
>
>
>
> On 01/02/2017 03:36 PM, Manoj Gupta wrote:
>> Request to all – Please help we are BADLY stuck in this asterisk 11.13
>> and Kamailio 4.1 integration provided with Elastix MT
>>
>>
>>
>> Our Configuration is like this:
>>
>>
>>
>> Asterisk IP – 10x.3x.6x.236 port 5080
>>
>> Kamailio IP - 10x.3x.6x.236 port 5060
>>
>>
>>
>> Please see our kamailio.cfg attached.
>>
>>
>>
>> Issue 1:
>>
>> Issue is REGISTER messages sent by asterisk are not responded by
>> kamailio asterisk is constantly doing a re-transmit on REGISTER messages.
>>
>>
>>
>> Retransmitting #1 (NAT) to 10x.3x.6x.236:5060:
>>
>> REGISTER sip:ims.airtel.in SIP/2.0
>>
>> Via: SIP/2.0/UDP 10x.3x.6x.236:5080;branch=z9hG4bK40ac1ed8;rport
>>
>> Max-Forwards: 70
>>
>> From: <sip:+91224...@ims.airtel.in>;tag=as565ef860
>>
>> To: <sip:+91224...@ims.airtel.in>
>>
>> Call-ID: 7dd361ec25cb07344ea9df526e89ca8a@10x.3x.6x.236
>>
>> CSeq: 182 REGISTER
>>
>> User-Agent: Asterisk PBX 11.13.0
>>
>> Expires: 120
>>
>> Contact: <sip:+91224400@10x.3x.6x.236:5080>
>>
>> Content-Length: 0
>>
>>
>>
>> Issue 2:
>>
>> We are not able to see any log messages in /var/log/kamailio.log. We
>> have done all kind of changes suggested on online blogs
>>
>>
>>
>> Why does kamailio not have a pre-set configuration as it is mostly used
>> as sip proxy?
>>
>>
>>
>>
>>
>> Manoj K. Gupta
>>
>>
>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users@lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
