Hi Daniel,
It only works as expected when i set the first parameter in function
t_set_fr greater than 0.
I don't know if it helps to understand the issue but I have a kamailio
acting as load balancer in front of my 2 "proxy/register" servers (also
built in kamailio), this LB is replying always with "100 - trying" to the
INVITES sent from proxy/register.
Thank you
José
2016-12-09 10:34 GMT+00:00 Daniel-Constantin Mierla <mico...@gmail.com>:
> Hello,
>
> hmm, strange -- so you say that in some cases when 100 is received the
> expiration timer works as expected, other times not?
>
> I am trying to identify a pattern of the situation, because there is
> nothing obvious I could spot being wrong.
> Cheers,
> Daniel
>
>
> On 08/12/2016 19:33, José Seabra wrote:
>
> Hello Daniel,
> In all situations it receives 100, I can do more different tests if do you
> need to know what is behavior, even i can make a test without receive 100.
> Than you
>
> Regards
> Em 08/12/2016 14:58, "Daniel-Constantin Mierla" <mico...@gmail.com>
> escreveu:
>
>> Hello,
>>
>> in the other cases when you say it works, do you receive the 100?
>>
>> Cheers,
>> Daniel
>>
>> On 08/12/2016 12:26, José Seabra wrote:
>>
>> Hi Daniel,
>>
>> Yes I get 100 Trying.
>>
>> Thank you
>> Regards
>>
>> José
>>
>> 2016-12-08 7:58 GMT+00:00 Daniel-Constantin Mierla <mico...@gmail.com>:
>>
>>> Hello,
>>>
>>> do you get any 1xx response after sending out the request?
>>>
>>> Cheers,
>>> Daniel
>>>
>>> On 07/12/2016 21:11, José Seabra wrote:
>>>
>>> Hi Daniel,
>>> Yes if I omit the first parameter it works, and if I configure other
>>> value than 0 on first parameter it only enters on failure route after
>>> expire the value configured on first parameter, for example;
>>> I i set t_set_fr(10000,2000), call will only enter in failure route
>>> after 10000 miliseconds.
>>>
>>> This behavior is very weird, it only appends when i send the INVITE to
>>> the AOR.
>>>
>>> But maybe is something that I'm doing wrong before this route within my
>>> kamailio script, anyway i'm still looking for the possible causes inside of
>>> my script.
>>>
>>> Once again, thank you for your great help.
>>>
>>> Regards
>>> José
>>>
>>> 2016-12-07 9:48 GMT+00:00 Daniel-Constantin Mierla <mico...@gmail.com>:
>>>
>>>> Hello,
>>>>
>>>> I haven't found any error message related to tm in the logs you
>>>> attached.
>>>>
>>>> You say that if you omit the first parameter, everything works ok? Can
>>>> you try to set the first parameter to a non-zero value?
>>>>
>>>> Cheers,
>>>> Daniel
>>>>
>>>> On 06/12/2016 16:45, José Seabra wrote:
>>>>
>>>> Hello Daniel,
>>>>
>>>> Yes, i have attached this in this email, please checkout.
>>>> Regarding to t_set_fr() function, i use it in several places within my
>>>> kamailio scripts without any issue, I only noticed this behavior on this
>>>> particular case.
>>>>
>>>> I don't if this can be relevant but I have tested t_set_fr function
>>>> with the following parameters => t_set_fr(,2000) and it entered on failure
>>>> route after 2 seconds.
>>>>
>>>>
>>>> Let me know if do you need anything else.
>>>> Thank you
>>>> José Seabra
>>>>
>>>> 2016-12-06 13:26 GMT+00:00 Daniel-Constantin Mierla <mico...@gmail.com>
>>>> :
>>>>
>>>>> Hello,
>>>>>
>>>>> any error log messages? Any other t_set_fr() in your config file that
>>>>> may be executed?
>>>>> Cheers,
>>>>> Daniel
>>>>>
>>>>>
>>>>> On 06/12/2016 12:01, José Seabra wrote:
>>>>>
>>>>> Hello there,
>>>>> I'm using t_set_fr(0,2000) on calls to registered phones but by any
>>>>> reason this isn't working, the call only enters on the failure route
>>>>> after
>>>>> 30 seconds in case of no response from SBC/Phone, anyone has any idea what
>>>>> can be the reason for that?
>>>>>
>>>>> if(lookup("location")) {
>>>>> xlog("L_INFO", "routing to registered phone
>>>>> ruid=$ruid R=$ru - ID=$ci \n");
>>>>> t_set_fr(0, 2000);
>>>>> t_on_failure("ASBC_FAILURE");
>>>>> t_on_branch("ASBC_BRANCH");
>>>>> route(RELAY);
>>>>> exit;
>>>>> }
>>>>>
>>>>> My RELAY route:
>>>>> route[RELAY] {
>>>>>
>>>>> # enable additional event routes for forwarded requests
>>>>> # - serial forking, RTP relaying handling, a.s.o.
>>>>> if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE"))
>>>>> {
>>>>> if(!t_is_set("branch_route"))
>>>>> t_on_branch("MANAGE_BRANCH");
>>>>> }
>>>>> if (is_method("INVITE|SUBSCRIBE|UPDATE"))
>>>>> {
>>>>> if(!t_is_set("onreply_route"))
>>>>> t_on_reply("MANAGE_REPLY");
>>>>> }
>>>>> if (is_method("INVITE"))
>>>>> {
>>>>> if(!t_is_set("failure_route"))
>>>>> t_on_failure("MANAGE_FAILURE");
>>>>> }
>>>>>
>>>>> if (!t_relay())
>>>>> {
>>>>> sl_reply_error();
>>>>> }
>>>>> exit;
>>>>> }
>>>>>
>>>>> version: kamailio 4.4.2 (x86_64/linux)
>>>>>
>>>>> Thanks
>>>>>
>>>>> --
>>>>> Cumprimentos
>>>>> José Seabra
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
>>>>> listsr-us...@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>>
>>>>> --
>>>>> Daniel-Constantin Mierlawww.twitter.com/miconda --
>>>>> www.linkedin.com/in/miconda
>>>>> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
>>>>>
>>>>> _______________________________________________ SIP Express Router
>>>>> (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>>> sr-users@lists.sip-router.org http://lists.sip-router.org/cg
>>>>> i-bin/mailman/listinfo/sr-users
>>>>
>>>> --
>>>> Cumprimentos
>>>> José Seabra
>>>>
>>>> --
>>>> Daniel-Constantin Mierlawww.twitter.com/miconda --
>>>> www.linkedin.com/in/miconda
>>>> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
>>>>
>>>> --
>>> Cumprimentos
>>> José Seabra
>>>
>>> --
>>> Daniel-Constantin Mierlawww.twitter.com/miconda --
>>> www.linkedin.com/in/miconda
>>> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
>>>
>>> --
>> Cumprimentos
>> José Seabra
>>
>> --
>> Daniel-Constantin Mierlawww.twitter.com/miconda --
>> www.linkedin.com/in/miconda
>> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
>>
>> --
> Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/miconda
> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
>
>
--
Cumprimentos
José Seabra
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
