Hello,
the ACK for requests within dialogs is routed via route[WITHINDLG], if
it has a Route header -- also you can check if it belongs to an dialog
-- dialog module should export a function for that.
Cheers,
Daniel
On 05/12/2016 14:13, Jonathan Hunter wrote:
>
> Hello,
>
>
> Ok thanks for that, it works perfectly.
>
>
> I am generating the SIP INFO message, on receipt of a 200ok, which is
> being triggered by the event_route[dialog:start].
>
>
> One last thing, is it possible to trigger /capture the event of the
> ACK being received for the 200 ok ?
>
>
> As ideally I want to send SIP INFO after the ACK has been sent,
> however currently I am triggering on receipt of the 200ok, so dialog
> is started.
>
>
> Can I have;
>
>
> INVITE--->
>
> <---200OK
>
> ACK--->
>
> INFO---->
>
>
> So in effect RELAY the ACK, then trigger this SIP INFO to be sent?
>
>
> Thanks
>
>
> Jon
>
>
>
>
> ------------------------------------------------------------------------
> *From:* Daniel-Constantin Mierla <mico...@gmail.com>
> *Sent:* 05 December 2016 10:32
> *To:* Jonathan Hunter; Kamailio SER - Users Mailing List
> *Subject:* Re: [SR-Users] Send SIP Info within a dialog using
> $uac_req(method)="INFO"
>
>
> Hello,
>
>
> all the headers must be in a single parameter, I see that you provide
> headers one by one in the params array. Try:
>
>
> jsonrpc_exec('
> {
> "jsonrpc":"2.0",
> "method":"tm.t_uac_start",
> "params": [
> "INFO",
> "$dlg(to_uri)",
> ".",
> ".",
>
> "From:$var(testjon)\r\nTo:$var(testjon2)\r\nContact:$var(testjon4)\r\nContent-Type:
> application/json\r\nContent-Length: 0\r\n"
> ]
> }
> ');
>
> Cheers,
> Daniel
>
> On 01/12/2016 17:12, Jonathan Hunter wrote:
>> Hi Daniel,
>>
>> I am trying tm.t_uac_start and its stating Content-Type Missing, I
>> have tried to add to params but it doesnt like it, where should it be
>> defined?
>>
>> Command below;
>>
>>
>> jsonrpc_exec('{"jsonrpc":"2.0","method":"tm.t_uac_start","params":
>> ["INFO",
>> "$dlg(to_uri)",".",".","From:$var(testjon)\r\n","To:$var(testjon2)\r\n","Contact:$var(testjon4)\r\n","Content-Type:
>> application/json\r\n","Content-Length: 0\r\n"]}');
>>
>> And logs;
>>
>> Dec 1 16:09:15 POC_ProxyA /usr/sbin/kamailio[11883]: INFO: <script>:
>> getting here Content-Type missing
>> Dec 1 16:09:15 POC_ProxyA /usr/sbin/kamailio[11883]: INFO: <script>:
>> getting here
>> {"jsonrpc":"2.0","error":{"code":-32000,"message":"Execution Error"}}
>>
>> Thanks
>>
>>
>> Jon
>>
>>
>>
>> ------------------------------------------------------------------------
>> *From:* Daniel-Constantin Mierla <mico...@gmail.com>
>> *Sent:* 01 December 2016 12:31
>> *To:* Jonathan Hunter; Kamailio SER - Users Mailing List
>> *Subject:* Re: [SR-Users] Send SIP Info within a dialog using
>> $uac_req(method)="INFO"
>>
>>
>> Hello,
>>
>>
>> tm.t_uac_start is another rpc command than what was tried before,
>> this one doesn't do async operation.
>>
>> Cheers,
>> Daniel
>>
>> On 01/12/2016 13:28, Jonathan Hunter wrote:
>>>
>>> Hello,
>>>
>>>
>>> I am currently still using the exec module, so within the .cfg file,
>>> as when using jsonrpc-s its coming up with the async command issue
>>> again, I presume this will still be the case?
>>>
>>>
>>> Ok I will try with the combinations you mention.
>>>
>>>
>>> Many thanks
>>>
>>>
>>> Jon
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>> *From:* Daniel-Constantin Mierla <mico...@gmail.com>
>>> *Sent:* 01 December 2016 12:24
>>> *To:* Jonathan Hunter; Kamailio SER - Users Mailing List
>>> *Subject:* Re: [SR-Users] Send SIP Info within a dialog using
>>> $uac_req(method)="INFO"
>>>
>>>
>>> Hello,
>>>
>>>
>>> are you still trying with MI command via kamctl? Not with the
>>> jsonrpc-s module and tm.t_uac_start?
>>>
>>>
>>> When double quotes disappear is likely due to command line
>>> interpreter, so you need to put two of them for each one you have
>>> now, then ones than need to stay should be with more backslashes.
>>>
>>>
>>> Also, you can try to use single quotes to enclose the parameter
>>> values and let the double quotes in the content of the parameter.
>>>
>>>
>>> Cheers,
>>> Daniel
>>>
>>>
>>> On 30/11/2016 15:38, Jonathan Hunter wrote:
>>>> Hi,
>>>>
>>>> I am just testing with the mi t_uac_dlg command, and I am trying to
>>>> create an additional header, which is sent in the SIP INFO message
>>>> and actually contains double quotes.
>>>>
>>>> So in my kamailio.cfg script file I set the variable;
>>>>
>>>>
>>>> $var(testjon8) = "p1=\"STOP\"";
>>>>
>>>> xlog("L_INFO","We are going to try and use $var(testjon8)\n");
>>>>
>>>> And when seeing in the logs I see it states;
>>>>
>>>> We are going to try and use p1="STOP"
>>>>
>>>> And p1="STOP" is exactly what I want.
>>>>
>>>> However when I generate the SIP INFO message, and check on the wire
>>>> using wireshark I see;
>>>>
>>>> Event:p1=STOP
>>>>
>>>> So it doesnt have the double quotes I would like.
>>>>
>>>> How can I escape them so the t_uac_dlg command includes them?
>>>>
>>>> The portion where this header is generated in the command is;
>>>>
>>>>
>>>> exec_avp("kamctl mi t_uac_dlg INFO $dlg(to_uri) . .
>>>> \\\"From:'$var(testjon)'\"\\r\\nTo:$var(testjon2)\\r\\nCall-ID:$var(testjon3)\\r\\nAllow:$var(Allow)\\r\\nContact:$var(testjon4)\\r\\nEvent:$var(testjon8)\\r\\n\\\"\"",
>>>> "$avp(test)");
>>>>
>>>>
>>>>
>>>> And also running debug I see it as Event:p1="STOP"\r\n\""
>>>>
>>>>
>>>> Can you tell me how I can escape " so its actually within the SIP
>>>> header itself?
>>>>
>>>> Many thanks
>>>>
>>>> Jon
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>> *From:* sr-users <sr-users-boun...@lists.sip-router.org> on behalf
>>>> of Jonathan Hunter <hunter...@hotmail.com>
>>>> *Sent:* 25 November 2016 18:55
>>>> *To:* Kamailio SER - Users Mailing List; mico...@gmail.com
>>>> *Subject:* Re: [SR-Users] Send SIP Info within a dialog using
>>>> $uac_req(method)="INFO"
>>>>
>>>>
>>>> Hi Daniel,
>>>>
>>>>
>>>> Great thanks very much, will give it a try.
>>>>
>>>>
>>>> Jon
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>> *From:* Daniel-Constantin Mierla <mico...@gmail.com>
>>>> *Sent:* 22 November 2016 18:46
>>>> *To:* Jonathan Hunter; Kamailio SER - Users Mailing List
>>>> *Subject:* Re: [SR-Users] Send SIP Info within a dialog using
>>>> $uac_req(method)="INFO"
>>>>
>>>>
>>>> Hello,
>>>>
>>>>
>>>> got a bit of time to look at the code and discovered that there is
>>>> a rpc command tm.t_uac_start added by ser guys that might get you
>>>> moving forward. It is not waiting for the reply of the generated
>>>> request and you can use it with json rpc exec function in the
>>>> config, so it avoids using exec.
>>>>
>>>>
>>>> Can you give it a try?
>>>>
>>>>
>>>> Some documentation can be found in the comments of the function
>>>> used by this command:
>>>>
>>>> -
>>>> https://github.com/kamailio/kamailio/blob/master/modules/tm/rpc_uac.c#L399
>>>>
>>>> Cheers,
>>>> Daniel
>>>>
>>>>
>>>> On 22/11/2016 18:35, Jonathan Hunter wrote:
>>>>>
>>>>> Hi Daniel,
>>>>>
>>>>>
>>>>> Thanks here you go;
>>>>>
>>>>>
>>>>> [root@POC_ProxyA kamailio]# kamctl mi t_uac_dlg INFO
>>>>> sip:3003@193.144.1.112 . udp:10.70.1.136:5060
>>>>>
>>>>> \"From:sip:1234@8.8.8.8"\r\nTo:sip:3003@193.144.1.112\r\nContact:sip:daemon@8.8.8.8\r\n\""
>>>>> 404 Invalid local socket
>>>>> [root@POC_ProxyA kamailio]# VERBOSE=1 kamctl mi t_uac_dlg INFO
>>>>> sip:3003@193.144.1.112 . udp:10.70.1.136:5060
>>>>>
>>>>> \"From:sip:1234@8.8.8.8"\r\nTo:sip:3003@193.144.1.112\r\nContact:sip:daemon@8.8.8.8\r\n\""
>>>>> database engine 'MYSQL' loaded
>>>>> Control engine 'FIFO' loaded
>>>>> entering fifo_cmd t_uac_dlg INFO sip:3003@193.144.1.112 .
>>>>> udp:10.70.1.136:5060 "From:sip:1234@8.8.8.8
>>>>> To:sip:3003@193.144.1.112
>>>>> Contact:sip:daemon@8.8.8.8
>>>>> "
>>>>> 404 Invalid local socket
>>>>> FIFO command was:
>>>>> :t_uac_dlg:kamailio_receiver_23469
>>>>> INFO
>>>>> sip:3003@193.144.1.112
>>>>> .
>>>>> udp:10.70.1.136:5060
>>>>> "From:sip:1234@8.8.8.8
>>>>> To:sip:3003@193.144.1.112
>>>>> Contact:sip:daemon@8.8.8.8
>>>>> "
>>>>>
>>>>>
>>>>> Thanks
>>>>>
>>>>>
>>>>> Jon
>>>>>
>>>> Daniel-Constantin Mierla
>>>> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
>>>> Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
>>>
>>> --
>>> Daniel-Constantin Mierla
>>> twitter.com/miconda -- linkedin.com/in/miconda
>>> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
>>
>> --
>> Daniel-Constantin Mierla
>> www.twitter.com/miconda -- www.linkedin.com/in/miconda
>> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
>
> --
> Daniel-Constantin Mierla
> www.twitter.com/miconda -- www.linkedin.com/in/miconda
> Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
--
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - May 8-10, 2017 - www.kamailioworld.com
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
