Hello,
I am trying to figure out why the kamctl is not passing further the params. Can you set VERBOSE=1 in kamctlrc or just run like: VERBOSE=1 kamctl mi ... It should print the command sent over the fifo file. Send the output here so I can check it. Cheers, Daniel On 21/11/2016 18:38, Jonathan Hunter wrote: > > Hello, > > > Thanks Daniel, knowing how I should specify all the parameters would > be great, just a syntax example, in particular when defining all the > sip headers and why their are double quotes/single quotes or what best > method is. > > > Thanks again and sorry for the noise! > > > Jon > > > > > > something seems to be strange with interpreting the parameters from > command line and forwarding them to kamailio. I will dig a bit into > kamctl and come back with some hints. > > > Cheers, > Daniel > > > On 21/11/16 13:19, Jonathan Hunter wrote: >> >> Hello. >> >> >> This is running from command line, not withing the configuration >> file, so I am testing before I try to add it in. >> >> >> I have tried with single quotes, but not sure how to enclose the SIP >> headers and the r/n , can you please advise? >> >> >> kamctl mi t_uac_dlg INFO sip:3003@193.144.1.112 . >> udp:10.70.1.136:5060 >> >> \"From:sip:1234@8.8.8.8"\r\nTo:sip:3003@193.144.1.112\r\nContact:sip:daemon@8.8.8.8\r\n\"" >> >> >> As I have tried; >> >> >> kamctl mi t_uac_dlg 'INFO' 'sip:3003@193.144.1.112' '.' >> 'udp:10.70.1.136:5060' >> >> 'From:sip:1234@8.8.8.8'r\n'To:sip:3003@193.144.1.112'\r\n'Contact:sip:daemon@8.8.8.8'\r\n\' >> >> >> And still get invalid socket, as it is including all the SIP headers >> in with the port parameter so I presume I am missing an operator? >> >> >> /usr/sbin/kamailio[28999]: ERROR: <core> [main.c:1128]: >> parse_phostport(): too many colons in >> udp:10.70.1.136:5060From:sip:1234@8.8.8.8rnTo:sip:3003@193.144.1.112rnContact:sip:daemon@8.8.8.8rn' >> >> >> >> Its including them all as the local socket/port. >> >> Thanks >> >> Jon >> >> ------------------------------------------------------------------------ >> *From:* Daniel-Constantin Mierla <mico...@gmail.com> >> *Sent:* 21 November 2016 11:29 >> *To:* Jonathan Hunter; Kamailio SER - Users Mailing List >> *Subject:* Re: [SR-Users] Send SIP Info within a dialog using >> $uac_req(method)="INFO" >> >> >> Hello, >> >> >> On 20/11/16 16:12, Jonathan Hunter wrote: >>> >>> Hello, >>> >>> >>> Ok great thanks Daniel. >>> >>> >>> One final thing, I cant seem to get kamilio to except the parameter >>> when I add the socket parameter in the kamctl mi t_uac_dlg command. >>> >>> >>> If I add as below I get 404 invalid local socket; >>> >>> >>> kamctl mi t_uac_dlg INFO sip:3003@193.144.1.112 . >>> udp:10.70.1.136:5060 >>> >>> \"From:sip:1234@8.8.8.8"\r\nTo:sip:3003@193.144.1.112\r\nContact:sip:daemon@8.8.8.8\r\n\"" >> >> do you run this command from command line or from kamailio.cfg? I >> think it's good to be sure it works from command line. >> >> Also, can you try to enclose each parameter in single quotes -- then >> it's easier for the command line parser to identify the parameters. >> >> Cheers, >> Daniel >> >>> 404 Invalid local socket >>> >>> As its picking up the socket with the from address included as well, >>> is this again around syntax? >>> >>> ERROR: <core> [main.c:1128]: parse_phostport(): too many colons in >>> udp:10.70.1.136:5060"From:sip:1234@8.8.8.8 >>> >>> As it seems to pick socket up ok; >>> >>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo >>> [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <INFO> >>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo >>> [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val >>> <sip:3003@193.144.1.112> >>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo >>> [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val <.> >>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo >>> [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val >>> <udp:10.70.1.136:5060> >>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo >>> [mi_parser.c:245]: mi_parse_tree(): adding node <> ; val >>> <From:sip:1234@8.8.8.8 >>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo >>> [mi_parser.c:84]: mi_parse_node(): end of fifo input tree >>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: DEBUG: mi_fifo >>> [fifo_fnc.c:507]: mi_fifo_server(): done parsing the mi tree >>> Nov 20 15:11:36 POC_ProxyA /usr/sbin/kamailio[23175]: ERROR: <core> >>> [main.c:1128]: parse_phostport(): too many colons in >>> udp:10.70.1.136:5060"From:sip:1234@8.8.8.8 >>> >>> > > -- > Daniel-Constantin Mierla > http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda > Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
