Hello,
On 16/11/16 14:59, Oliver Roth wrote: > > Hi, > > > > I guess it is after executing rtpengine_maange() – but not really sure. > > How can I check that? > load debugger module and enable cfgtrace option via modparam. Then you should see what functions are executed from config. Cheers, Daniel > > > I get a different sdp header that is going out of the gateway > > > > v=0 > > o=Dialogic_SDP 3975025 0 IN IP4 213.173.185.38 > > s=Dialogic-SIP > > c=IN IP4 185.49.222.198 > > t=0 0 > > m=audio 20306 RTP/AVP 8 0 125 101 > > a=rtpmap:0 PCMU/8000 > > a=rtpmap:8 PCMA/8000 > > a=rtpmap:125 CLEARMODE/8000 > > a=rtpmap:101 telephone-event/8000 > > a=fmtp:101 0-15 > > a=silenceSupp:off - - - - > > a=sendrecv > > a=rtcp:20307 > > a=ice-ufrag:UMTBynMy > > a=ice-pwd:63JdnvLS7cMyCQ978BA6syPmiI > > a=candidate:GUTMVOhP7VJyBkZg 1 UDP 2130706431 185.49.222.198 20306 typ > host > > a=candidate:GUTMVOhP7VJyBkZg 2 UDP 2130706430 185.49.222.198 20307 typ > host > > > > Incoming was > > > > v=0 > > o=Dialogic_SDP 3975025 0 IN IP4 213.173.185.38 > > s=Dialogic-SIP > > c=IN IP4 213.173.185.39 > > t=0 0 > > m=audio 9036 RTP/AVP 8 0 125 101 > > a=rtpmap:0 PCMU/8000 > > a=rtpmap:8 PCMA/8000 > > a=rtpmap:125 CLEARMODE/8000 > > a=rtpmap:101 telephone-event/8000 > > a=fmtp:101 0-15 > > a=silenceSupp:off - - - - > > > > > > > > *Von:*sr-users [mailto:sr-users-boun...@lists.sip-router.org] *Im > Auftrag von *Daniel-Constantin Mierla > *Gesendet:* Mittwoch, 16. November 2016 10:34 > *An:* Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.org> > *Betreff:* Re: [SR-Users] SDP Codec not removed with RTPengine - but > with rtpproxy it worked > > > > Hello, > > are you executing rtpengine_manage() before or after removing the codec? > > Cheers, > Daniel > > > > On 16/11/16 10:03, Oliver Roth wrote: > > Hi there > > > > I have the following problem – I need to remove a codec in the > initial INVITE. > > This happens since I changed from rtpproxy to rtpengine. I changed > all rtpproxy_manage() to rtpengine_manage(). > > > > Originating INVITE with the “clearmode” > > > > m=audio 9196 RTP/AVP 8 0 125 101 > > a=rtpmap:0 PCMU/8000 > > a=rtpmap:8 PCMA/8000 > > a=rtpmap:125 CLEARMODE/8000 > > a=rtpmap:101 telephone-event/8000 > > > > > > I do the following in the config > > route[SDP] { > > xlog(, "L_INFO", "SDP: request method $rm"); > > > > # remove CLEARMODE if Colt > > if($avp(s:todirection) > =~"^MyCarrier+") { > > > > if (is_method("INVITE")) { > > xlog(, "L_INFO", > "SDP remove: request method $rm"); > > msg_apply_changes(); > > > sdp_remove_codecs_by_name("CLEARMODE"); > > > #sdp_remove_codecs_by_id("125"); > > > > } > > } > > } > > This block gets hit as I can see with the xlog entry. > > > > In the sent INVITE the “Clearmode” is still in the sdp header > > > > a=rtpmap:0 PCMU/8000 > > a=rtpmap:8 PCMA/8000 > > a=rtpmap:125 CLEARMODE/8000 > > a=rtpmap:101 telephone-event/8000 > > > > So with rtpproxy – it worked > > With rtpengine not any more … > > > > Any idea? > > > > KR, > > Oli > > > > > _______________________________________________ > > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > > sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > -- > Daniel-Constantin Mierla > http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - > http://www.linkedin.com/in/miconda > Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 28-30, 2016 - http://www.asipto.com
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
