Hi Daniel

Yes I get all the traffic in the lbl (first hop) and on the gw (routing gw).
Even the call is processed and I get rtp on both sides.

But: ACK is not routed to the carrier behind the gw. Therefore the call gets 
cut from carrierside – because of missing ACK after 200 OK

I could provide a complete trace from the whole scenario.

About your inputs:
Where should they be done? On the LBL (dispatcher, first hop) or on the gateway 
(gw)?

Regards,
Oli


Von: sr-users [mailto:sr-users-boun...@lists.sip-router.org] Im Auftrag von 
Daniel-Constantin Mierla
Gesendet: Freitag, 1. Juli 2016 09:55
An: Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.org>
Betreff: Re: [SR-Users] ACK / BYE transaction problem


Hello,

can you get the traffic on load balancer (or the first hop in your network that 
received the invite)? There you can see if the fault is in your network or not.

In kamailio.cfg, be sure you don't use fix_nated_contact() function unless you 
are the first hop receiving the sip message (request or reply). As a matter of 
fact, fix_nated_contact() should not be used anymore, use set_contact_alias() 
instead and handle requests within dialog with handle_ruri_alias() -- see 
default kamailio.cfg for latest kamailio versions.

Cheers,
Daniel

On 29/06/16 17:20, Oliver Roth wrote:
Yes the ip for the [carr] is missing.

But I thought, the [gw ] should create the ack based on the transaction and 
send it to the [carr]

My situation
Class5 system [c5] --> Loadbalancer kamailio (dispatcher module) [lbl] ---> 
gateway kamailio [gw] --> carrier [carr]

So who is doing a mistake? The lbl, the gw or even the c5 system?

If helpful, I could provide a trace with all the stations in it.

Kr,
Oli

Von: sr-users [mailto:sr-users-boun...@lists.sip-router.org] Im Auftrag von 
Francisco Valentin Vinagrero
Gesendet: Mittwoch, 29. Juni 2016 16:17
An: Kamailio (SER) - Users Mailing List 
<sr-users@lists.sip-router.org><mailto:sr-users@lists.sip-router.org>
Betreff: Re: [SR-Users] ACK / BYE transaction problem

Your ACK is missing the right IP in the RURI (should be the one in the contact 
header in the 200 OK) and the Route headers for every Record-Route in the 200 
OK, if I understand well your scenario…

From: sr-users [mailto:sr-users-boun...@lists.sip-router.org] On Behalf Of 
Oliver Roth
Sent: 29 June 2016 16:04
To: Kamailio (SER) - Users Mailing List 
<sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org>>
Subject: Re: [SR-Users] ACK / BYE transaction problem

I removed the changes for the to header – so it is not touched all the time



200 ok from [carr]

SIP/2.0 200 OK
From: <sip:41275279225@212.25.7.69>;tag=sc1NXPTEST-4c9b51343502af61
To: <sip:0794567735@212.25.7.70>;tag=snl_0015024070
Call-ID: 5773d0ab9b30-5bau50gxp4en
CSeq: 1 INVITE
Via: SIP/2.0/UDP 
185.49.222.44;branch=z9hG4bKbe7c.0f5ca21e3a66f41694ca709ac28c1192.0
Via: SIP/2.0/UDP 
185.49.222.43;branch=z9hG4bKbe7c.a5e4cba8b1d9a4a56d1120d012a06850.0
Via: SIP/2.0/UDP 
212.25.7.69:5060;uac=sc1;branch=z9hG4bKsc1NXPTEST-ae749ab817378131
Record-Route: <sip:185.49.222.44;lr=on;did=4b7.9422>
Record-Route: <sip:185.49.222.43;lr=on>
Contact: <sip:794567735@81.7.235.236:5060;transport=udp>
Content-Type: application/sdp
Content-Length: 197
Accept-Language: en;q=0.0
Allow: REGISTER, INVITE, ACK, BYE, CANCEL, NOTIFY, REFER, UPDATE
Supported: timer
Session-Expires: 1800;refresher=uas
Date: Wed, 29 Jun 2016 13:44:20 GMT

v=0
o=- 277262053 1 IN IP4 81.7.235.228
s=-
c=IN IP4 81.7.235.228
t=0 0
m=audio 24212 RTP/AVP 8 101
a=fmtp:101 0-15
a=rtpmap:101 telephone-event/8000
a=silenceSupp:off - - - -
a=ptime:20


ACK from [lbl] to [gw]

ACK sip:185.49.222.44;did=4b7.9422;lr=on SIP/2.0

From: <sip:41275279225@212.25.7.69>;tag=sc1NXPTEST-4c9b51343502af61

To: <sip:0794567735@212.25.7.70>;tag=snl_0015024070

Call-ID: 5773d0ab9b30-5bau50gxp4en

CSeq: 1 ACK

Max-Forwards: 28

Via: SIP/2.0/UDP 
185.49.222.43;branch=z9hG4bKbe7c.a6f12b66454fbb7b536aa22cef3d568c.0

Via: SIP/2.0/UDP 
185.49.222.43;branch=z9hG4bKbe7c.7bc483a166362b13ba3cc40ca60308ea.0

Via: SIP/2.0/UDP 212.25.7.69:5060;branch=z9hG4bKsc1NXPTEST-ae749ab817378131A

Content-Length: 0

X-gateway: <null>

X-SI: <null>

X-gateway: <null>

X-SI: <null>


Initial Inivte to [gw] from [lbl]

INVITE sip:0794567735@185.49.222.43:5060 SIP/2.0

Record-Route: <sip:185.49.222.43;lr=on>

From: <sip:0275279225@212.25.7.69>;tag=sc1NXPTEST-4c9b51343502af61

To: <sip:0794567735@212.25.7.70>

Call-ID: 5773d0ab9b30-5bau50gxp4en

CSeq: 1 INVITE

Allow: INVITE, ACK, CANCEL, BYE, OPTIONS

Max-Forwards: 29

User-Agent: AareSwitch/6.2.8553

Via: SIP/2.0/UDP 
185.49.222.43;branch=z9hG4bKbe7c.a5e4cba8b1d9a4a56d1120d012a06850.0

Via: SIP/2.0/UDP 
212.25.7.69:5060;uac=sc1;branch=z9hG4bKsc1NXPTEST-ae749ab817378131

Contact: <sip:0275279225@212.25.7.69:5060>

P-Asserted-Identity: <sip:0275279225@212.25.7.69>

Content-Type: application/sdp

Content-Length: 401


Invite sent to [carr] from [gw]

INVITE sip:41794567735@81.7.235.236 SIP/2.0

Record-Route: <sip:185.49.222.44;lr=on;did=4b7.9422>

Record-Route: <sip:185.49.222.43;lr=on>

From: <sip:41275279225@212.25.7.69>;tag=sc1NXPTEST-4c9b51343502af61

To: <sip:0794567735@212.25.7.70>

Call-ID: 5773d0ab9b30-5bau50gxp4en

CSeq: 1 INVITE

Allow: INVITE, ACK, CANCEL, BYE, OPTIONS

Max-Forwards: 28

User-Agent: AareSwitch/6.2.8553

Contact: <sip:41279225@212.25.7.69>

Via: SIP/2.0/UDP 
185.49.222.44;branch=z9hG4bKbe7c.0f5ca21e3a66f41694ca709ac28c1192.0

Via: SIP/2.0/UDP 
185.49.222.43;branch=z9hG4bKbe7c.a5e4cba8b1d9a4a56d1120d012a06850.0

Via: SIP/2.0/UDP 
212.25.7.69:5060;uac=sc1;branch=z9hG4bKsc1NXPTEST-ae749ab817378131

P-Asserted-Identity: <sip:41275279225@212.25.7.69;user=phone>

Content-Type: application/sdp





Von: sr-users [mailto:sr-users-boun...@lists.sip-router.org] Im Auftrag von 
Francisco Valentin Vinagrero
Gesendet: Mittwoch, 29. Juni 2016 16:00
An: Kamailio (SER) - Users Mailing List 
<sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org>>
Betreff: Re: [SR-Users] ACK / BYE transaction problem

Hi,

Does the ACK has the correct Router headers and R-URI? Maybe you can share the 
200 OK and the ACK headers..

I had a similar issue 3 weeks ago.

Cheers, Francisco.

From: sr-users [mailto:sr-users-boun...@lists.sip-router.org] On Behalf Of 
Oliver Roth
Sent: 29 June 2016 15:55
To: sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org>
Subject: [SR-Users] ACK / BYE transaction problem


Hi all

Follow scenario

Class5 system [c5] --> Loadbalancer kamailio (dispatcher module) [lbl] ---> 
gateway kamailio [gw] --> carrier [carr]

I get Invites from [c5] with
Request ,To, from, contact, pid in national format 0794445566

[lbl] dispatches this to [gw]

For the [carr] I need international format.

So doing these transactions in [gw]
And sending to [carr] in international format

Request, to, from, contact, … => 417794445566
Everything ok

Then I get a 100, 183 and even 200 from [carr]
Ack is coming from [c5] to [lbl] and [gw] – but then it stocks

The ACK is not sent to the [carr]

I kamailio log I see
DEBUG: RFC3261 transaction matching failed
DEBUG: t_lookup_request: no transaction found


So for me, the ACK cannot be assigned to a transaction and gets discarded by

if ( is_method("ACK") ) {
                                                               xlog(,"L_INFO", 
"WITHINDLG ACK - not loose route\n");
                                                               if ( 
t_check_trans() ) {
                                                                               
xlog(,"L_INFO", "WITHINDLG ACK - t_check_trans() \n");
                                                                               
# no loose-route, but stateful ACK;
                                                                               
# must be an ACK after a 487
                                                                               
# or e.g. 404 from upstream server
                                                                               
t_relay();
                                                                               
exit;
                                                               } else {
                                                                               
xlog(,"L_INFO", "WITHINDLG ACK - not t_check_trans() DISCARD!!\n");
                                                                               
# ACK without matching transaction ... ignore and discard
                                                                               
route(NATMANAGE);
                                                                               
#t_relay();
                                                                               
#exit;



Any idea?

Problem with modifying the sip tags? Or problem with the dialog?


Thanks for helping
OIi







_______________________________________________

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list

sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org>

http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



--

Daniel-Constantin Mierla

http://www.asipto.com - http://www.kamailio.org

http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Reply via email to