hello.
how can i block SIP messages by message content type. for exlamle : text/plain
tanks in advance!
________________________________
From: sr-users [sr-users-boun...@lists.sip-router.org] on behalf of TEG AMJG
[tega...@gmail.com]
Sent: Tuesday, April 05, 2016 1:35 AM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] dispatcher [dispatch.c:1416]: ds_load_remove(): cannot
find load for (from asterisk call-id)
Hi Alberto, thanks for your reply
yeah, i am using ds_select_dst("0","10") in this case because i use setid=0 in
the dispatcher table as you can see in this route block
route[TOASTERISK] {
#!ifdef WITH_LOADBALANCE
xlog("L_INFO","UBICAR: Forwarding non-registrar requests to Asterisk
\n");
if(!ds_select_dst("0", "10")) {
sl_send_reply("500", "Service Unavailable");
xlog("L_ERROR","UBICAR: No destinations available for $rd \n");
exit;
}
xlog("L_ERROR","UBICAR: AVP $avp(dsdstid)\n");
xlog("L_INFO","UBICAR: Dispatching to Asterisk Box $du\n");
t_set_fr(0,10000);
t_on_failure("MANAGE_FAILURE");
route(RELAY);
exit;
#!endif
}
Also both Asterisk are responding to ping probes done by Kamailio, they are
actually responding 404 but are still kept alive thanks to this param:
modparam("dispatcher", "ds_ping_reply_codes", "class=2;code=480;code=404")
and the command kamctl dispatcher dump shows them with flags=AP
URI:: sip:192.168.10.191:5060<http://192.168.10.191:5060> flags=AP priority=0
attrs=duid=PBX2;my=pbx2;maxload=200
URI:: sip:192.168.10.190:5060<http://192.168.10.190:5060> flags=AP priority=0
attrs=duid=PBX1;my=pbx1;maxload=200
Also, i would like to know if there is a way to print some kind of table to see
how kamailio are keeping these call loads recorded. I have been looking for it
but i cannot find any way of doing it
Again, thank you very much for your reply
2016-04-04 14:23 GMT-03:00 Alberto Sagredo
<alberto.sagr...@avanzada7.com<mailto:alberto.sagr...@avanzada7.com>>:
Hi
Are you using ds_select_dst("1", "10"); somewhere ?
You have to check Asterisk is responding to OPTIONS as dispatcher considered UP
when 200 OK from Asterisk or SIP Gateway is received.. and not if not received.
I have used dispatcher but not with 10 option on algo...
BR
2016-04-04 8:07 GMT+02:00 TEG AMJG
<tega...@gmail.com<mailto:tega...@gmail.com>>:
Hi
I am new to Kamailio and i am just trying to setup a kamailio (v4.2.3)
dispatcher to distribute calls to 2 asterisk using the call load distribution
algorithm (alg 10). I started to test and see how all it is working and in the
logs appears that the call load record it cannot be found.
- ERROR: dispatcher [dispatch.c:1416]: ds_load_remove(): cannot find load for
(call id generated by asterisk)
I am getting this error trying a 2 call leg conversation when asterisk is
creating the BYE message destinated to the callee after receiving a BYE message
from the caller, and the BYE message by Asterisk reach Kamailio to then apply
the ds_load_update function
From what i understand about ds_load_update it is that it sets the load to an
specific destination if Kamailio receives a 2xx reply of an INVITE message, and
removes it if Kamailio receives a BYE message based from the Call-id received
in that message, where it is actually failing in my implementation at the moment
Here are the blocks of code of the dispatcher parameters and where the function
ds_load_update() is being used:
#!ifdef WITH_LOADBALANCE
#Parameters using Dispatcher from DB
# ----------
modparam("dispatcher", "db_url", DBURL)
modparam("dispatcher", "table_name", "dispatcher")
# ----------
#Enabling failover mechanism
# -----------
modparam("dispatcher", "flags", 2)
# -----------
#Setting dispatcher parameters in AVP
# -----------
modparam("dispatcher", "dst_avp", "$avp(AVP_DST)")
modparam("dispatcher", "grp_avp", "$avp(AVP_GRP)")
modparam("dispatcher", "cnt_avp", "$avp(AVP_CNT)")
modparam("dispatcher", "dstid_avp", "$avp(dsdstid)")
# -----------
#Setting dispatcher result in PV variables
# -----------
modparam("dispatcher", "attrs_pvname", "$var(attrs)")
# -----------
#Enabling dispatcher algorithm according to call loads
# -----------
modparam("dispatcher", "ds_hash_size",8)
modparam("dispatcher", "ds_hash_expire", 3600)
modparam("dispatcher", "ds_hash_initexpire", 60)
# -----------
# Setting parameters for probing dispatcher destinations
# -----------
modparam("dispatcher", "ds_ping_interval", 20)
modparam("dispatcher", "ds_ping_from", "sip:kamailio1@<Kamailio IP>")
modparam("dispatcher", "ds_probing_mode", 1)
modparam("dispatcher", "ds_probing_threshhold", 2)
modparam("dispatcher", "ds_ping_reply_codes", "class=2;code=480;code=404")
# -----------
...
route[WITHINDLG] {
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
#!ifdef WITH_LOADBALANCE
if(is_method("BYE|CANCEL")){
xlog("L_ERROR","UBICAR BYE ds_load_update requesturi=$ru
from=$fu method=$rm callid=$ci to=$tu reply=$mt rrcode=$rr rcode=$rs\n");
ds_load_update();
}
#!endif
...
}
...
onreply_route[MANAGE_REPLY] {
#!ifdef WITH_LOADBALANCE
if(is_method("INVITE")) {
if(status=~"2[0-9][0-9]") {
xlog("L_ERROR","UBICAR setting ds_load_update requesturi=$ru
from=$fu method=$rm callid=$ci to=$tu reply=$mt rrcode=$rr rcode=$rs");
ds_load_update();
}else if(status=~"[3-7][0-9][0-9]") {
ds_load_unset();
}
}
#!endif
if(status=~"[12][0-9][0-9]"){
route(NATMANAGE);
}
}
This is what i am getting from logs after the 2 call legs conversation
completes:
kam1 /usr/sbin/kamailio[4082]: ERROR: <script>: UBICAR: FROMASTERISK
70175143146f92975a5bff8876435911@192.168.10.194<mailto:70175143146f92975a5bff8876435911@192.168.10.194>
kam1 /usr/sbin/kamailio[4082]: ERROR: <script>: UBICAR setting ds_load_update
requesturi=<null> from=sip:103@192.168.10.194<mailto:sip%3A103@192.168.10.194>
method=INVITE
callid=28d0f6e71625c9e87baec07f46167863@192.168.10.194<mailto:28d0f6e71625c9e87baec07f46167863@192.168.10.194>
to=sip:104@192.168.10.194<mailto:sip%3A104@192.168.10.194> reply=2 rrcode=OK
rcode=200
kam1 /usr/sbin/kamailio[4083]: ERROR: <script>: UBICAR setting ds_load_update
requesturi=<null>
from=sip:103@192.168.10.194:5060<http://sip:103@192.168.10.194:5060>
method=INVITE callid=1-3692@192.168.20.2<mailto:1-3692@192.168.20.2>
to=sip:104@192.168.10.194:5060<http://sip:104@192.168.10.194:5060> reply=2
rrcode=OK rcode=200
kam1 /usr/sbin/kamailio[4084]: ERROR: <script>: UBICAR BYE ds_load_update
requesturi=sip:104@192.168.10.190:5060<http://sip:104@192.168.10.190:5060>
from=sip:103@192.168.30.1:5060<http://sip:103@192.168.30.1:5060> method=BYE
callid=1-3692@192.168.20.2<mailto:1-3692@192.168.20.2>
to=sip:104@192.168.30.1:5060<http://sip:104@192.168.30.1:5060> reply=1
rrcode=<null> rcode=<null>
kam1 /usr/sbin/kamailio[4085]: ERROR: <script>: UBICAR BYE ds_load_update
requesturi=sip:104@192.168.30.2:22523;transport=UDP
from=sip:103@192.168.10.194<mailto:sip%3A103@192.168.10.194> method=BYE
callid=28d0f6e71625c9e87baec07f46167863@192.168.10.194<mailto:28d0f6e71625c9e87baec07f46167863@192.168.10.194>
to=sip:104@192.168.10.194<mailto:sip%3A104@192.168.10.194> reply=1
rrcode=<null> rcode=<null>
kam1 /usr/sbin/kamailio[4085]: ERROR: dispatcher [dispatch.c:1416]:
ds_load_remove(): cannot find load for
(28d0f6e71625c9e87baec07f46167863@192.168.10.194<mailto:28d0f6e71625c9e87baec07f46167863@192.168.10.194>)
Kamailio IP: 192.168.10.194
Asterisk IP:
+----+-------+-------------------------+-------+----------+-------------------------------+-------------+
| id | setid | destination | flags | priority | attrs
| description |
+----+-------+-------------------------+-------+----------+-------------------------------+-------------+
| 1 | 0 | sip:192.168.10.190:5060<http://192.168.10.190:5060> | 2 |
0 | duid=PBX1;my=pbx1;maxload=200 | pbx1 |
| 2 | 0 | sip:192.168.10.191:5060<http://192.168.10.191:5060> | 2 |
0 | duid=PBX2;my=pbx2;maxload=200 | pbx2 |
+----+-------+-------------------------+-------+----------+-------------------------------+-------------+
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org<mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
-
Saludos a todos
________________________________
[gh.ge]
ვლადიმერ გაბუნია
IT სამსახურის უფროსი
ტელ: (+995) 32 2505222 +8183
მობ: (995) 577 095333
შპს "ჯეო ჰოსპიტალს"
სათავო ოფისი
თბილისი 0160, ვაჟა-ფშაველას გამზ. № 16;
http://www.gh.ge <http://gh.ge>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
