> On 01 Apr 2016, at 22:07, Bruno Emer <brunoe...@gmail.com> wrote: > > Hello, Olle! > > Thanks for your help in this case, and don't worry about the time (actually I > wasn't even expecting to get an answer today). > > I know the max_contacts parameter. But the problem is that if I set the > max_contacts to 2, when the user tries to register again, he gets an error > message 503. The point is that I want to get the user registered, and replace > the oldest location entry for the newest one. THen you need to check the parameters to the save() command on the same documentation page: " 0x04 - store and maintain one contact per AoR. If there are other contact addresses for AoR not matching current registration, remove them. This mode ensures one contact per AoR (user).
“ /O > > > > Bruno Emer > > Mobile: +55 11 96540-0044 > email: brunoe...@gmail.com <mailto:brunoe...@gmail.com> > > 2016-04-01 16:31 GMT-03:00 Bruno Emer <brunoe...@gmail.com > <mailto:brunoe...@gmail.com>>: > Hello all. > > I have problem here and I tried to find a solution and search over internet, > but without success. > > My scenario is the following: I have an application that must be registered > in Kamailio when a user logs in the web interface, so he can get calls > (something like a web softphone using webrtc). At this point, we are OK, and > everything is working fine. > > To get these register functions I am using the parameter "save("location", > "0x04")" as described in the REGISTRAR module documentation, so if a user > logs in another web browser or computer, only the last one will continue > registered and all calls will be forwarded to him. > > The point is that now we are creating a phone app that will do almost the > same thing as the web interface, allowing users to receive calls using the > mobile device, and here is my problem: I want to allow my users to be > registered on two devices at the same time, but if a user logs into another > device, I don't want to reply with a 503. I want to allow the user to > register again, deregistering the oldest contact. > > I saw that there is a module named "ims_usrloc_scscf" and on its description > it says "implemented overwrite oldest contact behaviour", but I couldn't find > any documentation about it. > > So, is there a way to get this working today? > > > Bruno Emer > > Mobile: +55 11 96540-0044 <tel:%2B55%2011%2096540-0044> > email: brunoe...@gmail.com <mailto:brunoe...@gmail.com> > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
