HI Alexandru i talk about something like this maybe in your RELAY route or
similar.
I think you would have issues with ACKs until you would have Record-Route:
doubled
if (dst_ip==LOCALIPNETWORK/24) {
xlog("Using socket: LOCALIP:5060");
force_send_socket(udp:LOCALIP:5060);
} else {
xlog("Using socket: PUBLICIP:5060");
force_send_socket(udp:PUBLICIP:5060);
}
Hope this helps you
Use record_route() as well.
Anyway show me a trace that goes to FreeSwitch from Kamailio.
2016-02-25 10:55 GMT+01:00 Alexandru Covalschi <568...@gmail.com>:
> No other rr params defined so double rr is default - enabled.
> What do you mean by "force traffic" - how to do that? Every other request
> (excep BYE - same problem with it) flows OK.
>
> 2016-02-25 11:49 GMT+02:00 Alexandru Covalschi <568...@gmail.com>:
>
>> Hi, thanks for answer
>>
>> Here's configuration:
>>
>> listen=udp:MY_EXT_IP_ADDR:5060
>> listen=tcp:MY_EXT_IP_ADDR:5060
>> listen=udp:MY_INT_IP_ADDR:5060
>> listen=TCP:MY_INT_IP_ADDR:5060
>> listen=MY_WS_ADDR
>> advertised_address = MY_EXT_IP_ADDR
>> alias = MY_INT_IP_ADDR
>> alias = MY_DOMAIN
>>
>> #!ifdef WITH_TLS
>> listen=MY_WSS_ADDR
>> #!endif
>>
>> port=5060
>>
>> ...
>>
>> # ----- rr params -----
>> modparam("rr", "enable_full_lr", 1)
>> modparam("rr", "append_fromtag", 1)
>>
>>
>> 2016-02-25 8:47 GMT+02:00 Alberto Sagredo <alberto.sagr...@avanzada7.com>
>> :
>>
>>> Hi Alexandru
>>>
>>> How is your configuration about Public IP and Private IP?
>>>
>>> Do you use advertise?
>>>
>>> Maybe you need to force Outbound traffic to Public IP Socket and inside
>>> traffic to Private IP .
>>>
>>> Do you have double record routing?
>>>
>>> BR
>>>
>>> 2016-02-25 1:24 GMT+01:00 Alexandru Covalschi <568...@gmail.com>:
>>>
>>>> Hello everyone.
>>>>
>>>> The setup is:
>>>> Carrier ip is CARRIER_IP
>>>> Public network Kamailio IP will be PUBLIC_IP
>>>> Private network Kamailio IP will be KAMAILIO_PRIVATE_IP
>>>> Private network Freeswitch IP is FREESWITCH_PRIVATE_IP
>>>>
>>>> ACK
>>>> CARRIER_IP -> PUBLIC_IP->FREESWITCH_PRIVATE_IP
>>>>
>>>> And freeswitch tries to actually send ACK back to PUBLIC_IP which he
>>>> can't access.
>>>>
>>>> Kamailio trace: http://pastebin.com/raw/1W1sXuUa
>>>> Freeswitch trace: http://pastebin.com/raw/KkZCwTTJ
>>>>
>>>> request_route: http://pastebin.com/raw/Y17pXUGY
>>>> NATMANAGE route: http://pastebin.com/raw/0BpPDjN0
>>>> WITHINDLG route: http://pastebin.com/raw/5LpwSigF
>>>>
>>>> I'm seeking help with that - what parameter I need to change/add to
>>>> solve that?
>>>> Maybe it's a networking problem - but why then ACK reaches Freeswitch
>>>> and all other requests flow OK?
>>>>
>>>> Thanks in advance, Alex
>>>>
>>>> --
>>>> Alexandru Covalschi
>>>> ABRISS-Solutions
>>>> VoIP engineer and system administrator
>>>> phone: +37367398493
>>>> web: http://abs-telecom.com/
>>>>
>>>> _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>> sr-users@lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>>
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> sr-users@lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>
>>
>> --
>> Alexandru Covalschi
>> ABRISS-Solutions
>> VoIP engineer and system administrator
>> phone: +37367398493
>> web: http://abs-telecom.com/
>>
>
>
>
> --
> Alexandru Covalschi
> ABRISS-Solutions
> VoIP engineer and system administrator
> phone: +37367398493
> web: http://abs-telecom.com/
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
