Hi Franz, Could you please share the SIP generator .
Thank you so much in advance. Regards, -kranti On Mon, Feb 15, 2016 at 12:40 PM, <sainath.ellend...@wipro.com> wrote: > Hi Franz, > > Thanks a lot for your support. > > Traces decoded with diameter and could able to see the messages correctly. > > Yes, I am interested to capture traces using sip-scenario generator tool. > Can you please provide that tool. > > Somewhere I have read in Kamailio forum that, Call setup has successful > happened using "Boghe IMS client" and " Mercuro-Silver". > > Currently We are trying to automate the basic call scenario using Boghe > IMS client, It would be better if you can provide "Mercuro-Silver", So that > call can be established between two different IMS Client. Tried finding in > google for "Mercuro-Silver" but couldn't get it. > > Thanks in advance!! > > Regards, > Sainath > > -----Original Message----- > From: Franz Edler [mailto:franz.ed...@technikum-wien.at] > Sent: Friday, February 12, 2016 10:51 PM > To: Sainath Ellendula (NEP) <sainath.ellend...@wipro.com> > Cc: basits...@hotmail.com; sr-users@lists.sip-router.org > Subject: RE: Re:[SR-Users] Kamailio IMS deployment > > Hi Sainath, > > > It's working fine with given zone-files. > > Now, I could able to setup a call between two users, Please find > > attachment of tcpdump. > > Thats fine and congratulation. > > > Small clarification, I have started capturing of tcpdump before > > starting of other components including hss. But I don't see any > > diameter messages in Wireshark traces(tcpdump). > > That is caused by the fact that the 3 involved diameter nodes (HSS, I-CSCF > and S-CSCF) use 3 different ports for Diameter (3868, 3869 and 3870). > Only port 3868 is the assigned port number to Diameter, the other two port > numbers (3869 and 3870) are not. > The reason for this is a historic one. The OpenIMSCore platform used one > common IP-address for all tree nodes and therefore different port-numbers > had to be used. > > Wireshark has limited possibilities to automatically detect the protocol > behind a stream when port numbers deviating from the assigned ones are > used.You have to tell that to Wireshark. > Just take the two packets (#10 and #17) and in your tracefile > trace_12_2_2016_12.pcap and tell Wireshark "decode as Diameter" and you > will see what you might have expected. > > In your case, where you now succeeded to split the platform with different > IP-addresses this constraint has gone. > There is no reason to not use the same "assigned" port number 3868 for all > three nodes. This could be the next challenge for you to reconfigure. > > I have also added a message diagram produced with sip-scenario generator > which helps a lot in debugging. Just extract both html files and open the > one with the shorter filename (trace_12_2_2016_12_index.html). > The sip-scenario generator is an open-source-tool but unfortunately with > no support anymore. But it is really helpful. > If you are interested I can provide the tool. > > BR > Franz > > The information contained in this electronic message and any attachments > to this message are intended for the exclusive use of the addressee(s) and > may contain proprietary, confidential or privileged information. If you are > not the intended recipient, you should not disseminate, distribute or copy > this e-mail. Please notify the sender immediately and destroy all copies of > this message and any attachments. WARNING: Computer viruses can be > transmitted via email. The recipient should check this email and any > attachments for the presence of viruses. The company accepts no liability > for any damage caused by any virus transmitted by this email. > www.wipro.com > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
