Hi Baris, Could you please send full Kamailio config file? As I see call is not routed to Freeswitch for some reason. Maybe you don't have following lines in your config:
#!ifdef WITH_FREESWITCH freeswitch.bindip = "192.168.2.131" desc "FreeSWITCH IP Address" freeswitch.bindport = "5090" desc "FreeSWITCH Port"#!endif Without full Kamailio config file, I doubt that I will be able to help you. With kind regards, 2016-01-29 14:43 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com>: > Hello thanks, > > Log file in attachment (I added as Terminal Output) so it contains > daemon.log and syslog in the same file. You can see the terminal commands > with relations. > > Here is the log file content: > http://paste2.org/AwNINLtm > > It was too big and I could not send by mail. > > Regards. > > > On 29 Jan 2016, at 14:25, Jurijs Ivolga <jurij....@gmail.com> wrote: > > Hi Baris, > > Standard output means your screen where you putting your commands, like > reboot. > > http://www.linfo.org/standard_output.html > > Kamilio writes logs, when not in debug to syslog, in your case it will be > /var/log/syslog or /var/log/messages or anything else like Phil mentioned, > but this is when no debug is enabled. When debug is enabled it should > appear on your linux shell. > > With kind regards, > > Jurijs > > 2016-01-29 14:17 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com> > : > >> Hi, >> I checked /var/logs directory for files which has relationship with >> Kamailio but nothing found. >> >> Is there anything to do in this case? >> >> Regards. >> >> On 29 Jan 2016, at 13:37, Jurijs Ivolga <jurij....@gmail.com> wrote: >> >> div dir="ltr"> >> Hi, >> >> Kamilio logs should be in standard output, so basically in console, keep >> in mind that you need to restart kamailio after updating kamailio.cfg. >> >> With kind regards, >> >> 2016-01-29 13:33 GMT+02:00 Barış Şekerciler <baris.sekerci...@outlook.com >> >: >> >>> Hello Jurjis, >>> I could not reach the Freeswitch DEMO IVR with IP phones which >>> registered at Kamailio Server. I think Kamailio can not route the >>> Freeswitch. Because phone says "Not Found" when I dialed the "455000". >>> And nothing to see except this at fs_cli: >>> >>> freeswitch@internal> console loglevel 7 >>> +OK log level 7 [7] >>> +OK console log level set to DEBUG >>> >>> And I added #!define WITH_DEBUG line on Kamailio configuration file. So, >>> where does it write logs? >>> >>> Regards. >>> >>> On 29 Jan 2016, at 12:59, Jurijs Ivolga <jurij....@gmail.com> wrote: >>> >>> Hi Baris, >>> >>> On freeswitch: >>> /usr/local/freeswitch/bin/fs_cli # this will open freeswitch console and >>> next command run into it. >>> console loglevel 7 >>> >>> Then make a call from one extension to another and to 455000(what should >>> be freeswitch demo IVR) >>> Then copy all logs, put in file and send as attachment. >>> >>> On kamailio server somewhere on top add: >>> >>> #!define WITH_DEBUG >>> >>> Now all logs will be in console, so for same call copy logs what you get >>> in console to separate file, attach and send too. >>> >>> With kind regards, >>> >>> 2016-01-29 12:40 GMT+02:00 Barış Şekerciler < >>> baris.sekerci...@outlook.com>: >>> >>>> Hello again, >>>> I authanticated with Kamailio and communicate with IP phones >>>> succesfully. >>>> But depends on this tutorial: >>>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc >>>> When I tried to call "44102" I should go to voicemail box of user 102 >>>> but phone says "not found" and I think Kamailio could not route to >>>> Freeswitch. >>>> >>>> BTW, what kind of logs do you want? Level? How can I send these are? >>>> >>>> Regards. >>>> >>>> ------------------------------ >>>> From: baris.sekerci...@outlook.com >>>> Date: Fri, 29 Jan 2016 11:37:54 +0200 >>>> To: sr-users@lists.sip-router.org >>>> Subject: Re: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest >>>> >>>> Hello Jurjis, thanks for your answer. >>>> >>>> I did not try default IVR with Freeswitch. But I will try and write. >>>> >>>> Regards. >>>> >>>> On 29 Jan 2016, at 11:32, Jurijs Ivolga <jurij....@gmail.com> wrote: >>>> >>>> Hi Baris, >>>> >>>> Are you able to dial into Freeswitch default IVR(5000 ext)? >>>> >>>> It will helps if you send logs from Kamailio and freeswitch. >>>> >>>> With kind regards, >>>> >>>> 2016-01-29 11:14 GMT+02:00 Barış Şekerciler < >>>> baris.sekerci...@outlook.com>: >>>> >>>> Thanks for answer Phill. Actually I did not apply any different >>>> configuration than digetics in Kamailio Wiki. (I installed Kamailio latest >>>> stable from Deb Jessie repos) >>>> After that, I applied these are: >>>> http://kb.asipto.com/freeswitch:kamailio-3.1.x-freeswitch-1.0.6d-sbc and >>>> I adapted to Kamailio 4.3 (at least I tried) >>>> There is nothing to different from this link. >>>> >>>> So, I work on VmWare. >>>> Kamailio Server IP: 192.168.2.98 >>>> FreeSwitch Server IP: 192.168.2.131 >>>> >>>> >>>> >>>> >>>> >>>> On 29 Jan 2016, at 10:38, Phil Lavin <phil.la...@synety.com> wrote: >>>> >>>> You'll need to share your Kamailio config and some details of your >>>> network setup (specifically if NAT is involved). >>>> >>>> >>>> Phil >>>> >>>> -----Original Message----- >>>> From: sr-users [mailto:sr-users-boun...@lists.sip-router.org >>>> <sr-users-boun...@lists.sip-router.org>] On Behalf Of Baris Sekerciler >>>> Sent: 29 January 2016 08:35 >>>> To: sr-users@lists.sip-router.org >>>> Subject: [SR-Users] Kamailio v4.3 and Freeswitch Stable Latest >>>> >>>> Hello everyone. I'm a student and I'm working on project which about >>>> SIP communication and PBXs with IP phones. >>>> >>>> So, my first test results were OK with JITSI. But I think I need >>>> Freeswitch for working with IP phones. In a word, I need configure an >>>> integration Kamailio and Freeswitch. >>>> >>>> First, I setup Debian 8.3 Jessie and installed Kamailio on this my >>>> local server, after that I installed another Debian 8.3 Jessie (from same >>>> image) as my second server and it was going to run Freeswitch on itself. >>>> Then I tried to send my communication requests to my Freeswitch server. >>>> I made some tests, my Jitsi accounts which are set in Kamailio server were >>>> done. I've read Kamailio 3.2 and Freeswitch integration from the Kamailio >>>> wiki and I applied exactly the same thing but I did not work. >>>> When I tried to reach another IP phone from my IP phone (I registered >>>> them) phone always say "NOT FOUND". I'm sure I did my configuration >>>> properly. >>>> >>>> So, how can I figure it out these things? How can I understand, does >>>> Kamailio routes to Freeswitch to my phones? >>>> >>>> Best regards. >>>> Thanks. >>>> _______________________________________________ >>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>>> sr-users@lists.sip-router.org >>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> _______________________________________________ >>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>>> sr-users@lists.sip-router.org >>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> >>>> >>>> _______________________________________________ >>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>>> sr-users@lists.sip-router.org >>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> >>>> _______________________________________________ >>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>>> sr-users@lists.sip-router.org >>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> >>>> >>>> _______________________________________________ SIP Express Router >>>> (SER) and Kamailio (OpenSER) - sr-users mailing list >>>> sr-users@lists.sip-router.org >>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> _______________________________________________ >>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>>> sr-users@lists.sip-router.org >>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> >>> >>> >>> -- >>> Jurijs >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>> sr-users@lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >>> >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>> sr-users@lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >>> >>> >> >> >> -- >> Jurijs >> ___________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users@lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> --===============18 >> >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users@lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> > > > -- > Jurijs > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > -- Jurijs
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
