Thank you for commits. I just try it and now I can see that sending packets captured properly..
Now there is a problem with receiving packets, I does not see Initial invite from client into the capture. -- Best regards, Sergey Basov e-mail: sergey.v.ba...@gmail.com tel: (+38067) 403-62-54 2016-01-11 23:54 GMT+02:00 Daniel-Constantin Mierla <mico...@gmail.com>: > > > On 06/01/16 11:49, Daniel-Constantin Mierla wrote: >> [...] >>> But Packet which is send by siptrace module to homer capture server is >>> send before topoh modifications. >>> >>> If you can correct this flow it will be great. >> I will look into it as I said before. > Can you try with master branch? I pushed a series of commits for this. > You need to set siptrace modparam trace_mode to 1, then remove any use > of sip_trace() function as well as setflag() with trace flag. > > The receiving is after topoh does decoding at this moment, but sending > should be after topoh does enconding. Going to finalize the receiving > soon, but thought you may want to give it a try and report if sending is > captured properly. > > Cheers, > Daniel > > -- > Daniel-Constantin Mierla > http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda > Book: SIP Routing With Kamailio - http://www.asipto.com > http://miconda.eu > _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
