Hello, On 20/08/15 10:38, Waite, Hugh wrote: > > Hello, > > This is something I have been thinking about recently as well. > > > > The current implementation can read flags from the DB (or file etc) > but the probing flag is only a status and is cleared/set depending on > the probing_mode, so the value stored in the DB is basically ignored > after the first probe. > > I was going to suggest a new mode, e.g. “probe_if_set” which allows > each destination to indicate whether it wishes to probe. >
is this going to be a flag or a new value for ds_probing_mode? Not clear for me yet what you thought of. I was thinking of a new flag, but it might be for "skip-probing", if that makes it easier to keep it compatible with current values -- haven't really analyzed the impact and which type (do-probing/skip-probing) is better. Cheers, Daniel > Then you can have a set of entries which are all active but do not > probe, another set which probe all the time and another set that only > probe when they are inactive. Entries could still be administratively > disabled to take them out of service. > > > > Does this sound like what you need Joseph? > > > > Regards, > > Hugh > > > > *From:*sr-users [mailto:sr-users-boun...@lists.sip-router.org] *On > Behalf Of *Daniel-Constantin Mierla > *Sent:* 20 August 2015 08:57 > *To:* Kamailio (SER) - Users Mailing List > *Subject:* Re: [SR-Users] dispatcher gateway probing in 4.3 > > > > Hello, > > if no combination of probing_mode > (http://kamailio.org/docs/modules/stable/modules/dispatcher.html#dispatcher.p.ds_probing_mode) > and probing flags > (http://kamailio.org/docs/modules/stable/modules/dispatcher.html#idp1992504) > is not suitable for what you need, then this use case need to be added. > > Cheers, > Daniel > > On 19/08/15 23:11, Joseph Dickson wrote: > > Greetings.. > > > > I'm fairly new to Kamailio, and am having fun so far... I'm using > the latest 4.3 rpm version on Centos 7. > > > > I'm using Kamailio to front end a pair of FreeSwitch SBC boxes in > an active/active config.. My plan is to use dispatcher to load > balance calls between them. This is working fine.. the problem > that I'm bumping into is that the gateway probing options in > dispatcher seem not to fit my use case.. > > > > In addition to the two SBC gateways, I also have a few external > gateways that I want to load balance between also using > dispatcher. The problem is that I can't send options packets to > these gateways -- they don't respond to them. This means I can't > just configure dispatcher to probe all gateways (probing_method=1) > because it will mark these gateways as inactive.. > > > > It looks like every other configuration of probing_method only > probes a gateway until the state is determined, and then it stops > probing. probing_method=2 does not appear to be used at all in > the code.. > > > > Am I doing this wrong? Or is this just an area of dispatcher that > needs some improvement? Looking at the code, I can probably add > the functionality that I need, but I don't want to go that route > if I'm just missing how this is usually done.. > > > > Thanks, > > > > -- > > /*Joseph Dickson*/ > > E: jdick...@evolvetsi.com <mailto:jdick...@evolvetsi.com> > > > > > > > _______________________________________________ > > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > > sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > -- > Daniel-Constantin Mierla > http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> - > http://www.linkedin.com/in/miconda > Book: SIP Routing With Kamailio - http://www.asipto.com > ------------------------------------------------------------------------ > > This e-mail and any attachment is for authorised use by the intended > recipient(s) only. It may contain proprietary material, confidential > information and/or be subject to legal privilege. It should not be > copied, disclosed to, retained or used by, any other party. If you are > not an intended recipient then please promptly delete this e-mail and > any attachment and all copies and inform the sender. Thank you for > understanding. > -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Book: SIP Routing With Kamailio - http://www.asipto.com
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
