Thanks Vasily i have changed a little today using a RTPPROXY route.
Thats what i have right now
But its not working as expected
What i try is to detect if i have SAVP from endpoint and translate to RTP
to ASterisk an later RTP from ASterisk translate to SRTP using rtpengine
I had extrange behaviour using rtpproxy that send SRTP to Asterisk and i
have SRTP calls, i though rtpproxy 2.0 could not manage SRTP calls. but it
pass it to Asterisk
Using RTPengine i have tested with rtpproxy_manage as you see and also with
rtpengine.
If i load both start_recording() feature is lost.
On rtpengine (behind NAT) im using it as:
INTERFACES="192.168.0.178 internal/192.168.0.178 external/192.168.0.179
!EXTERN_IP
On NATMANAGE route i call directly
route(RTPPROXY);
Hope this helps
-----
route[RTPPROXY] {
if (is_method("INVITE")){
if(ds_is_from_list(1)){
if (is_ip_rfc1918("$si")) {
xlog("L_INFO", "LLamada desde los
Asterisk_$si -> RTPPROXY\n");
if (sdp_get_line_startswith("$avp(mline)", "m="))
{
#!ifdef WITH_RTPENGINE
if ($avp(mline) =~ "SAVP")
{
xlog("L_INFO", "Tenemos SRTP ");
xlog("L_INFO", "Llamada entre Extensiones
-> RTPENGINE INTERNAL");
rtpengine_manage("direction=internal
replace-origin replace-session-connection ICE=remove");
return;
}
#!endif
if ($avp(mline) =~ "AVP")
{
xlog("L_INFO", "Tenemos RTP ");
xlog("L_INFO", "Llamada entre Extensiones
-> RTPROXY ");
#!ifdef WITH_RTPPROXY
set_rtp_proxy_set("1");
rtpproxy_manage("fwei");
start_recording();
#!endif
#!ifdef WITH_RTPENGINE
set_rtp_proxy_set("2");
rtpproxy_manage("ie");
#!endif
}
}
}
}else if(!ds_is_from_list()){
if (sdp_get_line_startswith("$avp(mline)", "m="))
{
#!ifdef WITH_RTPENGINE
if ($avp(mline) =~ "SAVP")
{
xlog("L_INFO", "Tenemos SRTP ");
xlog("L_INFO", "Llamada entre Extensiones
-> RTPENGINE EXTERNAL ");
rtpengine_manage("direction=external
replace-origin replace-session-connection ICE=remove");
return;
}
#!endif
if ($avp(mline) =~ "AVP")
{
xlog("L_INFO", "Tenemos RTP ");
xlog("L_INFO", "Llamada entre Extensiones
-> RTPROXY ");
#!ifdef WITH_RTPPROXY
set_rtp_proxy_set("1");
rtpproxy_manage("fwie");
start_recording();
#!endif
#!ifdef WITH_RTPENGINE
set_rtp_proxy_set("2");
rtpproxy_manage("ei");
#!endif
}
}
}
}
}
2015-07-14 14:24 GMT+02:00 Vasiliy Ganchev <vasiliy.ganc...@wildix.com>:
> Alberto Sagredo-2 wrote
> > ...
> > I have been able to make SRTP To RTP to Asterisk
> >
> > But im not able to call between SRTP extensions, i understand also SRTP
> to
> > RTP would work as im doing with Asterisk (Only the speak SRTP as
> rtpengine
> > trasncode)
> >
> >
> > If you need any more info let me know.
> >
> > _______________________________________________
> > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>
> > sr-users@.sip-router
>
> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
> Hi!
> If you make SRTP to RTP to Asterisk, you possibly will need vice versa
> conversion (when request coming from Asterisk to client with SRTP).
>
> Can you describe the logic of test case: (UA-A (SRTP) --> Kamailio (make
> SRTP->RTP) .... etc.
>
> Because your explanation is difficult to understand.
>
> Cheers!
>
>
>
> --
> View this message in context:
> http://sip-router.1086192.n5.nabble.com/Issue-handling-SRTP-and-RTP-with-rtpproxy-and-rtpengine-tp139488p139521.html
> Sent from the Users mailing list archive at Nabble.com.
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
