Are you having the same problem as myself? Thanks, V On Fri, May 1, 2015 at 8:20 PM, Slava Bendersky <volga...@networklab.ca> wrote:
> Hello Vik, > > I have similar setup, try define you server configuration in tls.cfg > > [server:ip address of alias interface:port of alias interface] > method = TLSv1 > verify_certificate = no > require_certificate = no > private_key = > certificate = > ca_list = > crl = > > > Slava > ------------------------------ > *From: *"Vik Killa" <vipki...@gmail.com> > *To: *"sr-users" <sr-users@lists.sip-router.org> > *Sent: *Wednesday, April 29, 2015 4:32:21 PM > *Subject: *[SR-Users] issue with TLS and 2 NIC interfaces > > Hello, > if i have two interfaces (eth0 and eth0:0) > I set kamailio to listen to the IP on eth0:0 > This works great except when I try using TLS, kamailio routes traffic from > eth0:0 to eth0 then to correct destination > > It should be just doing eth0:0 -> correct destination > > If I use UDP/TCP I am not seeing this behavior. > If I set kamailio to listen to eth0 and remove eth0;0, TLS works fine. > > I'm running kamailio compiled from source git master a few days ago. > Is anyone else having this problem? > I'm wondering if it's a bug. > Thanks, > V > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
