Hi IMS'ers I am generating CCR's happily from the ims_charging module (adapted to work standalone with standard userloc module) but have a couple of questions around AVP's supported.
a) I note that in the 3GPP TS 32.299 V12.7.0 specification that table 7.1.0.1, that it indicates Vendor-Id and Vendor-Specific-Application-Id aren't used. But later in section 7.1.16 it indicates that the Vendor-Id should be 10415 and set inside the Vendor-Specific-Application-Id AVP. Should I assume that the table is wrong ? b) The ims_charging_module doesn't seem to put an Auth-Application-Id into the CCR. This is mandatory according to 3GPP and RFC4006. I note that it does appear under the Vendor-Specific-Application-Id - but this doesn't seem right to me? At this stage I am thinking to add the Auth-Application-Id AVP and also the 3GPP Called-Party-Address AVP. To I submit patches to the development list? Kind regards Shane Shane Harrison Senior Software Engineer Imagination Technologies NZ Limited Level 2 1 Market Grove Lower Hutt, 5010 New Zealand PO Box 30-449 Lower Hutt, 5040 New Zealand Phone: +64 4 890-3681 ext 3361 _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users