Thanks for the help guys.
I used a stateless proxy and was able to register. Now I am able to make
calls as well but there is an issue.
I receive multiple ringing but not receiving 200 ok after that. I keep on
receiving the ringing messages. Although the call gets connected and I hear
two way voice as well.
Also I am call through the sip number, but its not receiving any calls.
Any ideas?
Rizwan Khan
On Thu, Nov 27, 2014 at 9:04 PM, Daniel Tryba <dan...@pocos.nl> wrote:
> On Thursday 27 November 2014 08:29:51 Rizwan Khan wrote:
> > We want to use Kamailio as the pass-thru proxy in front of the SBC just
> to
> > receive the request on a random port, and then forward the request to the
> > SBC internally being on the same private network.
> >
> > What would be the best way to do it?
>
> If it is the best is up to the experts, but a way to do is to check wheter
> the
> source is the SBC or not. If the message is from the SBC just handle it
> statefully (t_relay), if it isn't from the SBC set the requested domain to
> the
> ipaddr of the SBC (10.1.2.3) and process stateful. You could use the
> received
> port instead if external clients only communicate on the special port
> ($Rp!=6334)
>
> kamailio.cfg:
>
> #...
> port=5060
> port=6334
> #...
>
> request_route {
> #...
>
> if($si!="10.1.2.3")
> {
> $rd="10.1.2.3";
> }
>
> route(RELAY);
> }
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
