Hello, if you start snmp daemon in debug mode, do you see references to kamailio MIBS?
On some systems, the paths are different, I remember that I had to move in various locations in order to get the MIBS properly seen. Cheers, Daniel On 20/11/14 17:23, Muszalski Michał - Hurt wrote: > > Good evening, > > I’m quite new in the Kamailio community so at the beginning I just > want to say “Hello” to everyone. > > > > I have a following problem with SNMP in Kamailio. > > I want to collect data from Kamailio by SNMP. I've installed snmpd on > the machine (Linux RHEL) and it's working. I've load snmpstats module > in Kamailio and it starts up without error. I've configured Kamailio > to use agentXsocket and enable agentx in SNMP. Port 705 is opened and > netstat shows connection established between Kamailio and SNMP. > Wireshark shows some packets going through. The problem is that there > is no data during snmpwalk from Kamailio. Just standard data from > SNMP, nothing from Kamailio. I've copied Kamailio MIBs to the proper > directory, added it in the snmp.conf. Moreover I've tried to add -m > +KAMAILIO-REG-MIB to snmpwalk. Still no data from Kamailio during > snmpwalk. > > > > Any ideas? > > > > Best Regards, > > Michal Muszalski > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
