Thank you for the reply Daniel. I have enabled debug=3 and put in a few more
xlog lines. I can see the REFER coming in on local interface 127.0.0.1. I am
now trying to narrow down the issue in the kamailio.cfg.
My conclusions so far are:
1) The REFER packet has a problem which causes it to fail sanity_check()
2) sanity_check returns 0=exit rather than -1 = error.
I have 2 snom phones registered to the kamailio server over NAT and can make
calls between them.
The REFER is failing in the REQINIT route block. The script stops there.
Kamailio.cfg : I started again with default 4.2 and kamailio.cfg as shipped
enabled MYSQL, USRLOCDB, inserted dialog module, replaced rtpproxy with
rtpengine.
#!define WITH_MYSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
#!define WITH_NAT
amended REQINIT as follows. I see log lines for “going to sanity check” but
neither “Malformed” or “returning” line are reached.
...
if (is_method("REFER")) {xlog("L_INFO","REFER going to sanity
check\n");}
if(!sanity_check("1511", "7")) {
xlog("L_INFO","Malformed SIP message from $si:$sp\n");
exit;
}
if (is_method("REFER")) {xlog("L_INFO","REFER returning OK from sanity
check");}
...
Then run from the command line:
kamcmd dlg.bridge_dlg sip:105@MYPUBLICIP sip:106@MYPUBLICIP sip:MYPUBLICIP:5060
Kamailio Output:
2(32566) DEBUG: <core> [parser/msg_parser.c:623]: parse_msg(): SIP Request:
2(32566) DEBUG: <core> [parser/msg_parser.c:625]: parse_msg(): method:
<REFER>
2(32566) DEBUG: <core> [parser/msg_parser.c:627]: parse_msg(): uri:
<sip:105@192.168.1.15:1082;transport=tcp;line=5twzz1pj>
2(32566) DEBUG: <core> [parser/msg_parser.c:629]: parse_msg(): version:
<SIP/2.0>
2(32566) DEBUG: <core> [parser/parse_via.c:1284]: parse_via_param(): Found
param type 232, <branch> = <z9hG4bKf666.1955cd53000000000000000000000000.0>;
state=16
2(32566) DEBUG: <core> [parser/parse_via.c:2672]: parse_via(): end of header
reached, state=5
2(32566) DEBUG: <core> [parser/msg_parser.c:513]: parse_headers():
parse_headers: Via found, flags=2
2(32566) DEBUG: <core> [parser/msg_parser.c:515]: parse_headers():
parse_headers: this is the first via
2(32566) DEBUG: <core> [receive.c:154]: receive_msg(): After parse_msg...
2(32566) DEBUG: <core> [receive.c:197]: receive_msg(): preparing to run
routing scripts...
2(32566) INFO: <script>: --- SCRIPT Got a REFER packet from MYPUBLICIP to
sip:105@192.168.1.15:1082;transport=tcp;line=5twzz1pj --
2(32566) DEBUG: <core> [parser/parse_addr_spec.c:176]: parse_to_param():
DEBUG: add_param: tag=wg03aczruz
2(32566) DEBUG: <core> [parser/parse_addr_spec.c:898]: parse_addr_spec(): end
of header reached, state=29
2(32566) DEBUG: <core> [parser/msg_parser.c:190]: get_hdr_field(): DEBUG:
get_hdr_field: <To> [41]; uri=[sip:105@MYPUBLICIP]
2(32566) DEBUG: <core> [parser/msg_parser.c:192]: get_hdr_field(): DEBUG: to
body [<sip:105@MYPUBLICIP>]
2(32566) DEBUG: <core> [parser/msg_parser.c:170]: get_hdr_field():
get_hdr_field: cseq <CSeq>: <11> <REFER>
2(32566) DEBUG: maxfwd [mf_funcs.c:85]: is_maxfwd_present(): value = 70
2(32566) INFO: <script>: REFER going to sanity check
2(32566) DEBUG: <core> [parser/msg_parser.c:204]: get_hdr_field(): DEBUG:
get_hdr_body : content_length=0
2(32566) DEBUG: sanity [mod_sanity.c:255]: w_sanity_check(): sanity checks
result: 0
On 23 Oct 2014, at 15:39, Daniel-Constantin Mierla <mico...@gmail.com> wrote:
> Hello,
>
> what should be happen, is the following:
>
> - invite from controller to first parameter (caller of desired call)
> - after 200ok comes from 'caller', kamailio sends REFER to it pointing to the
> second parameter (callee of desired call) and then BYE, getting out of the
> initial call
> - after getting the REFER, caller should send a new INVITE to callee
>
> You can run with debug=3 to see what happens. In kamailio config is nothing
> special needed, just allow traffic from kamailio to go back to kamailio.
>
> Cheers,
> Daniel
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
