Forgive me if this is daft - but what is your need for the Presence module?
It sounds like you're trying to enable two different technologies that do the same thing, since SCA already handles busy-lamps. I presume I'm just missing something. -- Jorj On Jul 14, 2014, at 3:57 PM, Joel White <joelewh...@gmail.com> wrote: > I am enabling what was in the default config for WITH_PRESENCE > > When I enable WITH_PRESENCE, the Polycom phones do not show BLF > > Sure, I am using SPIP 335, SPIP 601 and 650, as well as VVX 1500 and SPIP 5000 > > For the 601 I am running Legacy firmware 3.1.8 combined with a Bootrom of > 3.1.3 rev D > > For the 335, 650, and 5000 I am running firmware version 3.2.6 Combined . I > believe the Bootrom is 4.2.0 > > I have not started to work on auto provisioning with the VVX 1500 and have > been manually configuring them. I believe that they will work with the 3.2.6 > firmware as well although I have seen many using 4.0.3 firmware with the > newer VVX models > > > > Ask me anything and I will try to help :) > > > On Thu, Jul 10, 2014 at 7:28 AM, João Vitor Arruda <joao.arr...@gmail.com> > wrote: > Hi Joel, > > When you say: "I enable presence modules" what you mean? > Other than loading the module itself you may have included some code in > kamailio.cfg using to handle the SUBSCRIBE messages for presence right? > > Without knowing your config, one thing that crossed my mind is: > - Since both SCA and PRESENCE modules need to handle SUBSCRIBE messages you > need to be sure that you do it first using the SCA function > "sca_handle_subscribe()" just for the ones with Event header == "call-info" > or == "line-seize". Then, for all the other SUBSCRIBE messages you can use > the PRESENCE module function. > > There is an example of the code for filtering the ones to be handled by the > SCA module function here: > http://www.kamailio.org/docs/modules/devel/modules/sca.html#idp27944 > > You too mention that the SCA works fine on your Polycom phones, since I´m too > trying to use it but having some issues, I will appreciate if you can share > (either here or by pvt message) some info like: which Polycom phone models > and firmware version you are using. > > Regards, > João Vitor Arruda > > > 2014-07-08 13:26 GMT-03:00 Joel White <joelewh...@gmail.com>: > I am having an issue where I enable presence modules and the SCA module stops > working. I disable presence and SCA works fine on Polycom phones. Does > anyone know what I am missing or doing wrong? > > > Thank you in advance > > Joel > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
