Can you show here this errors?
12.06.2014 13:37 пользователь "Gijs Kwakkel" <[email protected]>
написал:
> there is a did field at the first packets (invite) till its 200 OK
> after that the DID field is gone.
> i however do not use the dialog module
>
> loadmodule "dialog.so"
> modparam("dialog", "dlg_match_mode", 0)
>
> gave some errors. should i still try to get the dialog module working?
>
>
>
>
> 2014-06-10 17:46 GMT+02:00 [email protected] <[email protected]>:
>
>> Hi!
>> Check "did=" in your dialog messages? if not present, use
>> match_dialog_mode = 0.
>>
>>
>> 2014-06-10 18:16 GMT+06:00 Gijs Kwakkel <[email protected]>:
>>
>>> client1 <> provider <> kamailio <> asterisk <> client2
>>>
>>> when client1 calls client2, everything seems to work. sounds works.
>>> after a few seconds the call gets terminated.
>>>
>>> after tcpdump syslog and config checks i figured out that asterisk sends
>>> 200 OK through kamailio to the provider, after this the provider sends a
>>> ACK to kamailio, kamailio however sends this ACK to itself and not to
>>> asterisk.
>>>
>>> I added the config, syslog and wireshark output (converted)
>>>
>>>
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> [email protected]
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> [email protected]
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> [email protected]
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
[email protected]
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
