Ok, so it looks like one of the things I had missing was the kamailio start command: sudo /etc/init.d/kamailio start
As the result of that command, I now get some info that lists the IP addresses that it's listening on which looks correct, but then it says: kamailio error, failed to start. Any ideas? Thanks, Brian On Wed, May 21, 2014 at 1:47 PM, Brian Watson <bwats9...@gmail.com> wrote: > Hi, > I have a virtual environment setup and am trying to get the integration > of Kamailio and Asterisk to a least be able to make a phone call based off > the Asterisk Hello World example. I do the following: > > 1. I'm running Ubuntu 14.04 and Oracle Virtual Box > 2. I Integrate Kamailio and Asterisk based off of the asipto kb: > > http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb > with both of them running on the same VM. > 3. I've modified sip.conf and extensions.conf to have entries that tie > together phones 101 and 102 > 3. I start asterisk with "asterisk" and "asterisk -rvvvvvv" > 4. I install and setup the Zoiper Softphone as indicated in the tutorial. > https://wiki.asterisk.org/wiki/display/AST/Hello+World > 5. In Zoiper I hardcode the Domain: xxx.xxx.xxx.xxx:5080 and also enter > the username and password. > 6. I'm doing all of this without access to an internet connection so > that's why I hardcode the IP address. > 7. After setting of the Zoiper softphone I try to get it to communicate > with Asterisk, but I get a 408 request timeout. > > Any ideas as to what might be wrong? > > Thanks, > Brian >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
