Hi Juha Thanks much for the assistance. I have refactored our LCR to work based on my own mysql query, where I am setting the gw_index as the id of the gateway, and the ip address I am putting in as a raw ip.
It is all working as far as I can tell but more testing will be in order for us. If I find any issues or gotcha I will post here just to let every one know. I hope this message finds you well. All the best. Will Ferrer On Tue, Apr 29, 2014 at 9:06 AM, Juha Heinanen <j...@tutpro.com> wrote: > Will Ferrer writes: > > > gw_index | scheme | strip | prefix | tag | ip_addr | hostname | port | > > params | transport | flags > > > > Most of these things are clearly retrievable from the DB (just look at > the > > lcr_gw table and you will see the values there) but I found 2 things > worthy > > of note: > > > > 1) gw_index: this seems that it can be any number that is unique inside > the > > avp, when I tried reconstructing this avp I used just 1 and 2 for my test > > entries and this worked. > > gw_index is index of the gateway in internal table that contains matched > gws after load_gw() call. > > > 2) ip_addr: There is some interesting munging that happens with in the c > > code to encode this value, however I found that when I over wrote the > > values of the avp manually I didn't need to do the munging -- just > putting > > an ip address in this space worked fine. > > ip_addr string is produced for ipv4 like this: > > string = int2str(ip_addr->u.addr32[0], &len); > > -- juha > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >
_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
