Hi Alex,
Thanks for the fast response as usual! :)
Will give it a try.
Thanks
Jon
From: abalas...@evaristesys.com
Date: Fri, 4 Apr 2014 17:10:10 +0200
To: sr-users@lists.sip-router.org
Subject: Re: [SR-Users] Kamailio 4.1 and Cisco 79xx Integration Work
You can modify the destination set ($du), which will influence where t_relay()
and forward() sends things.
On 4 April 2014 17:08:46 CEST, Jonathan Hunter <hunter...@hotmail.com> wrote:
Hi Guys,
I'm doing some work, with Legacy Cisco phones, its a long story but I need to
manipulate signaling due to firmware limitations.
I am looking to implement a workaround, whereby I need to modify an ACK, so
that it sends the RURI is sent to port 5060, and the destination Port at the IP
layer is unchanged, I can do this with static values as below;
sethostport("1.2.3.4:5060"); t_relay("1.2.3.4","38596");
In terms of doing this for multiple sites I need to use pseudo variables, so I
wondered how this could be achieved, as t_relay or forward dont support dynamic
values to this point, or do they?
Any comments would be great.
Many thanks
Jon
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Sent from my mobile, and thus lacking in the refinement one might expect from a
fully fledged keyboard.
Alex Balashov - Principal
Evariste Systems LLC
235 E Ponce de Leon Ave
Suite 106
Decatur, GA 30030
United States
Tel: +1-678-954-0671
Web: http://www.evaristesys.com/, http://www.alexbalashov.com
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
