Hello Kostas, the idea is to hide the Asterisk completely behind Kamailio, so I work only with the public IP of Kamailio and its SIP/RTP ports.
There are no Asterisk RTP ports enabled, while the Kamailio RTP are already open. Thank you > ----- Original Message ----- > From: meres > Sent: 01/21/14 05:06 AM > To: Kamailio (SER) - Users Mailing List > Subject: Re: [SR-Users] Kamailio behind NAT > > Hi John, > > rtpproxy is not enough if you are using asterisk in your environment. > You have to check that asterisk is configured to work with NAT, otherwise you > will experience audio problems. > Are the asterisk RTP ports enabled/forwarded on your firewall? > > Regards, > > Kostas > > On Jan 21, 2014, at 2:24 PM, John Smith <jsmith...@mail.com> wrote: > > > Hi Fred, > > > > I have followed your HOWTO and the scenario remains exactly the same. > > > > I see traffic from Phone1 IP to Kamailio private IP, from Kamailio private > > IP to Asterisk IP, and back directly to Phone2 public IP. > > > > I might be making wrong assumptions regarding this traffic flow. Is that > > correct? > > > > Thank you > > > > _______________________________________________ > > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > > sr-users@lists.sip-router.org > > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
