Re: [SR-Users] 500 I'm terribly sorry error

Daniel-Constantin Mierla Tue, 10 Dec 2013 23:39:35 -0800

I already told to pring the $ru, have you done it?

Daniel


On 10/12/13 17:09, Helena Garcia-Nieto wrote:


Hi Daniel,

Thanks for the answer but...

I already tested if the problem is there and even commenting theprefix out the error is exactly the same.


That is why I test it using:

pstn.gw_ip = "10.XX.XX.XX"

pstn.gw_port = "5060"

And route(PSTN)

Without changing original PSTN routing.

I'm getting the same problem.

Could you think on something else that can be affecting that?

Helena

*From:*sr-users-boun...@lists.sip-router.org[mailto:sr-users-boun...@lists.sip-router.org] *On Behalf Of*Daniel-Constantin Mierla

*Sent:* martes, 10 de diciembre de 2013 16:54
*To:* Kamailio (SER) - Users Mailing List
*Subject:* Re: [SR-Users] 500 I'm terribly sorry error

Hello,

I guess the r-uri is not correct after your changes. you can try toprint $ru with xlog(...) just before the route(RELAY).

You should use string operation to add the prefix instead of using aregular expression substitution, like:


prefix("A99901");

or

$rU = "A99901" + $rU;

Cheers,
Daniel

On 10/12/13 16:19, Helena Garcia-Nieto wrote:

    Hello,

    Thanks in advanced for the help. I am almost new with kamailio and
    still struggling through silly problems so please forgive me if
    the solution is so obvious.

    I have a network like

    Xlitle -- Kamailio -- GW

    The GW is more or less out of my reach for changing the behaivour.

    As devices I have xlitle

    Kamailio is on version 4.0.2

    I've changed only few things from the default config file. Add
    mysql support, auth, userlocdb, pstngw.

    For this part, gw routing , I've defined gw ip and port inside the
    PSTN definition like:

    #!ifdef WITH_PSTN

    # PSTN GW Routing

    #

    # - pstn.gw_ip: valid IP or hostname as string value, example:

    # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"

    #

    # - by default is empty to avoid misrouting

    pstn.gw_ip = "" desc "PSTN GW Address"

    pstn.gw_port = "" desc "PSTN GW Port"

    iskratel.gw_ip = "10.XX.XX.XX"

    iskratel.gw_port = "5060"

    #!endif

    I route the calls with:

       route(ISKRATEL);

    And defined a routing function

    route[ISKRATEL] {

    #!ifdef WITH_PSTN

            # check if ISKRATEL GW IP is defined

            if (strempty($sel(cfg_get.iskratel.gw_ip))) {

                    xlog("SCRIPT: PSTN rotuing enabled but
    iskratel.gw_ip not defined\n");

                    return;

            }

            # only local users allowed to call

            if(from_uri!=myself) {

                    sl_send_reply("403", "Not Allowed");

                    exit;

            }

            if (strempty($sel(cfg_get.iskratel.gw_port))) {

                    $ru = "sip:" + $rU + "@" +
    $sel(cfg_get.iskratel.gw_ip);

           } else {

                    $ru = "sip:" + $rU + "@" +
    $sel(cfg_get.iskratel.gw_ip) + ":"

                                            +
    $sel(cfg_get.iskratel.gw_port);

            }

            # Add profix to ISKRATEL: A99901

            subst_uri('/^sip:(.*)/sip:A99901\1/i')
    <sip:%28.*%29/sip:A99901%5C1/i%27%29>; # add A99901

            route(RELAY);

            exit;

    #!endif

            return;

    }

    I can see that the code goes all the way to the route(relay) but
    all I can see is the 500 I'm terribly sorry, server error occurred
    (7/SL) and a second response 500 I'm terribly sorry, server error
    occurred (7/TM)

    I've tried defining the IP as the given pstn.gw_ip and route(pstn)
    without changing anything on the  pst default routing but the
    response of the server is the same.

    I cannot see any special error on the logs.

    I have the exact same config for this part, in another test server
    and the calls go to the gw without reporting any error.

    I'll appreciate any help from you! Thanks in advanced for your time

    Helena




    _______________________________________________

    SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list

    sr-users@lists.sip-router.org  <mailto:sr-users@lists.sip-router.org>

    http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



--
Daniel-Constantin Mierla -http://www.asipto.com
http://twitter.com/#!/miconda  <http://twitter.com/#%21/miconda>  
-http://www.linkedin.com/in/miconda


--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Re: [SR-Users] 500 I'm terribly sorry error

Reply via email to